JK Products
-
JK BRASS PIN TUBING, lenght 10.8 mm, 24 psc. in pocket - #U50-12
JK BRASS PIN TUBING, lenght 10.8 mm, 24 psc. in pocket - #U50-12
Old catalog #JK9171
-
JK Repleacement tip for L70 wrench, long Reach 4.5" (120 mm) long 2mm Shaft, 0.050" - #L71
JK Repleacement tip for L70 wrench, long Reach 4.5" (120 mm) long 2mm Shaft, 0.050" - #L71
Precision Tolerance Allen Tip, Fits L10 and L15 handles
-
JK GEAR 64 PITCH, 36T, 0° angle, 3/32" axle, Ø15.05 mm, w/screw - #G636
JK GEAR 64 PITCH, 36T, 0° angle, 3/32" axle, Ø15.05 mm, w/screw - #G636
36t Polymer Gears 64 Pitch - The tooth shape was computer designed for less friction. Will never spin on the hub. 35T - Pink, 36T-yellow, 37T-silver, 38T-blue, 39T-violet, 40T-green
Old catalog #JK42361
-
JK Replacement tire & gear wrench tip .050", straight, dia. 3 mm - #L11
JK Replacement tire & gear wrench tip .050", straight, dia. 3 mm - #L11
Old catalog #JK80421
-
JK Guide Shoe Nut 9mm socket, Aluminum - #U8
JK Guide Shoe Nut 9mm socket, Aluminum - #U8
Old catalog #JK3516
-
JK CONTROLLER TRIGGER - #N9
JK CONTROLLER TRIGGER - #N9
Controller trigger, Updated
Old catalog #JK8083
-
JK Plastic rims for 3/32" axle, width 20 mm, Ø.400" (10.15 mm) - #R3S
JKP Plastic rims #R3S
- For 3/32" axle;
- Width 20 mm;
- Dia. .400" (10.15 mm).
Old catalog #JKR021
-
JK PLASTIC RIMS FOR 3/32" axle, width 20 mm, Ø10.2 mm - #JKR021-I
PARAMETERS
- axle: 3/32" (2,36 mm)
- width, mm: 20
- dia.,mm: 10,2
-
JK PLASTIC RIMS FOR 2 mm axle, width 20 mm, Ø10,2 mm - #R2S
JK PLASTIC RIMS #R2S
PARAMETERS
- axle, mm: 2
- width, mm: 20
- dia.,mm: 10,2
Old catalog #JKR021-2A
-
JK Stock car numbers, orange - #S6
JK Stock car numbers, orange - #S6
Old catalog #JK20031O
-
JK Gear 48 pitch, 26T, 1/8" axle with hub adaptor to 3/32", Ø14.76 mm, w/screw - #G426
JK Gear 48 pitch, 26T, 1/8" axle with hub adaptor to 3/32", Ø14.76 mm, w/screw - #G426
Old catalog #JK4126
-
JK PINION GEAR 48 PITCH, 8T , 2 mm bore, STEEL - #P48S
JK PINION GEAR 48 PITCH, 8T , 2 mm bore, STEEL - #P48S
48 pitch 8 tooth solder on pinion
Old catalog #JK4208
-
JK GEAR 64 PITCH, 36T, 0° angle, 3/32" axle, Ø15.05 mm, w/screw, narrow - #G636N
JK GEAR 64 PITCH, 36T, 0° angle, 3/32" axle, Ø15.05 mm, w/screw, narrow - #G636N
36t Polymer Gears 64 Pitch - The tooth shape was computer designed for less friction. Will never spin on the hub. 35T - Pink, 36T-yellow, 37T-silver, 38T-blue, 39T-violet, 40T-green
Old catalog #JK4236F
-
JK Stock car numbers, red - #S7
JK Stock car numbers, red - #S7
Old catalog #JK20031R
-
JK Precision guide nut wrench for JK#U61 nut - #L30
JK Precision guide nut wrench for JK#U61 nut - #L30
-
JK Ø3/32" (2.36 mm) rear axle, length 2.175" (55 mm) - #A1
JK Ø3/32" (2.36 mm) rear axle, length 2.175" (55 mm) - #A1
Solid 3/32" axle, highly durable 60HRc, axle is very fine grinded and polished, the 3/32" diameter is very accurate with maximum deflection of 0,001 mm (.00004"), great straightness along the entire length, it is crooked to max. 0,005 mm (.0002") throughout the entire length, ends are also grinded, exact diameter of this axle is 2,371 mm (.093346"), the best axle ever available for profi racing
Old catalog #JK5501
-
JK BRASS GUIDE CLIPS, short, pair - #U16
JK BRASS GUIDE CLIPS, short, pair - #U16
PRE BENT BRASS GUIDE CLIPS WITH SHORT TOP PLATE FOR SOLDERING LEAD WIRE IN THE SLOT OF THE GUIDE
The most available guide clips. Made from brass thickness 0,3 mm.
Old catalog #JK3546
-
JK BRASS GUIDE CLIPS, long, pair - #U15
JK BRASS GUIDE CLIPS, long, pair - #U15
The most available guide clips. Made from brass thickness 0,3 mm.
Old catalog #JK3542
-
JK 4" Cheetah Aeolos 1 piece pan - #C26P
JK 4" Cheetah Aeolos 1 piece pan - #C26P
-
JK 4" CHEETAH X25 KIT 0.9MM THICK chassis for PRODUCTION 1/24, ISRA legal - #C25
JK 4" CHEETAH X25 KIT 0.9MM THICK chassis for PRODUCTION 1/24, ISRA legal - #C25
4" Cheetah X25 Stainless Steel Chassis Kit 0.9mm thick. Features: Radial pressing guide plate, holes for either 1/2" or 5/8" fronts, shorter in length than the X24 chassis and slightly thicker in the rear pillar block than the X24.
Old catalog #JKX25
-
JK 4" CHEETAH X25 CENTER SECTION 0.9MM - #C25C
JK 4" CHEETAH X25 CENTER SECTION 0.9MM - #C25C
.9mm thick replacement center section for the JKP 4" CHEETAH X25 KIT 0.9MM THICK chassis for PRODUCTION 1/24- #JKPX25
Old catalog #JKX25C
-
JK 4" CHEETAH X25 PAN 0.9MM - #C25P
JK 4" CHEETAH X25 PAN 0.9MM - #C25P
0.9mm replacement pans for 4" X25 chassis JKP 4" CHEETAH X25 KIT 0.9MM THICK chassis for PRODUCTION 1/24- #JKPX25
Old catalog #JKX25P
-
JK 4" Cheetah aeolos aluminum pan - #C26PA
JK 4" Cheetah aeolos aluminum pan - #C26PA
Old catalog #C43PA
-
JK J-bar accessory pack for C26 aeolos chassis (0.8mm, 0.9mm. 1.0mm, 1.1mm, 1.2mm, 1.3mm, 1.2mm, 1.3mm - #C26J
JK J-bar accessory pack for C26 aeolos chassis (0.8mm, 0.9mm. 1.0mm, 1.1mm, 1.2mm, 1.3mm, 1.2mm, 1.3mm - #C26J
Part number is JKC26J and the price is $4.95 for a pack of 6 bars: 0.031" = 0.8mm 0.035" = 0.9mm (stock front) 0.039" = 1.0mm 0.043" = 1.1mm.
Old catalog #C43J