DUBICK Engineering

• 

  DUBICK 61/39 QUALITY SOLDER in storage tube, diameter 1mm, long 6 feet (1.8 m), 1 pc. - #211

  DUBICK 61/39 QUALITY SOLDER in storage tube, diameter 1mm, long 6 feet (1.8 m), 1 pc. - #211

  1.90 $

• 

  DUBICK gold plated short guide clips. Made special for new RED FOX guides. (But also fit for all other guides), 1 pair - #DB701

  DUBICK gold plated short guide clips. Made special for new RED FOX guides. (But also fit for all other guides), 1 pair (NEW!)

  1.95 $

• 

  DUBICK FANAT Electronic controller with banana plugs - #720BP

  DUBICK Electronic controller

  - suitable for all classes of models;
  - adjust the sharpness of the transistor;
  - high quality 30 amp transistor;
  - electronic CHOKE;
  - 30-speed gold-plated contact block;
  - bronze contacts for maximum speed and braking;
  - built-in voltmeter;
  - complete protection against incorrect switching on.

  245.00 $

• 

  DUBICK Reinforcement tape for pin hole, 30 x 180 mm (1,18" x 7,1") - #707

  DUBICK Reinforcement tape for pin hole, 30 x 180 mm (1,18" x 7,1") - #707

  1.35 $

• 

  DUBICK 2024 ES 1/32 Eurosport Chassis Assembled w/out ballbearings - #ES32

  All chassis starting from 2016 will be made of German high-carbon structural steel 1 mm thick. This is the same material that is used the world's leading chassis manufacturers.

  147.37 $

• 

  DUBICK Lead wire retainers, 2 pcs. - #710

  DUBICK Lead wire retainers, 2 pcs.

  0.35 $

• 

  DUBICK SEVEN-DIODES controller w/alligator clips - #727-7AC

  DUBICK SEVEN-DIODES controller w/alligator clips

  Variable brake for all motors up to 12 groups (Johnson, Hawk group, 16 & 12 group motors).

  127.00 $

• 

  DUBICK Anodized spring cups / 3 coil springs - #716

  DUBICK Anodized spring cups /3 coil springs

  4.00 $

• 

  DUBICK Engineering 2020 Open 12 chassis assembled without ballbearings - #122020

  All chassis starting from 2016 will be made of German high-carbon structural steel 1 mm thick. This is the same material that is used the world's leading chassis manufacturers.

  147.37 $

• 

  DUBICK Adjustable DUBICK Fanat PRO controller chip

  DUBICK Adjustable DUBICK Fanat PRO controller chip

  40.00 $

• 

  DUBICK Electronic controller FANAT Pro

  DUBICK Electronic controller FANAT Pro

  -suitable for all classes of models;
  -antibrake, antibrake correction;
  -electronic CHOKE;
  -Slow Attach/ fast Attachk function (innovation!!!)
  -15 chips;
  -built-in voltmeter;
  -gold-plated contact block;
  -holders for track board;
  -Transistor Correction

  750.00 $

• 

  DUBICK Controller chip 29 Ohm for DUBICK Electronic controller - #722-29

  DUBICK Controller chip 29 Ohm for DUBICK Electronic controller

  12.00 $

• 

  DUBICK Controller chip 58 Ohm for DUBICK Electronic controller - #722-58

  DUBICK Controller chip 58 Ohm for DUBICK Electronic controller

  12.00 $

• 

  DUBICK Anodized spring cups / 5 coil springs - #717

  DUBICK Anodized spring cups / 5 coil springs

  4.00 $

• 

  DUBICK Electronic controller Pro version

  DUBICK Electronic controller Pro version

  • -suitable for all classes of models;
  • -more functional than S&K, Kobis or DiFalco controllers;
  • -antibrake, antibrake correction;
  • -wire CHOKE;

  -traction control;

  • -one or two transistors in use;
  • -adjust the sharpness of the transistor;
  • -15 chips;
  • -built-in voltmeter;
  • -gold-plated contact block;
  • -full protection against incorrect switching on.

  1 400.00 $

• 

  DUBICK .004" (0.1 mm) Precision steel guide spacers, 6 pcs. - #708

  DUBICK .004" (0.1 mm) Precision steel guide spacers, 6 pcs.

  1.90 $

• 

  DUBICK Pinion gear 48 pitch, 6T, 2 mm bore, brass (This is solder style pinion gear) - #501-6

  48 pitch Straight stainless steel 6 tooth pinion gears

  IN STOCK!

  
  

  2.80 $

• 

  DUBICK Precut Brass pin tubes, length 10.8 mm, 4 pcs.- #406

  DUBICK Precut Brass pin tubes, length 10.8 mm, 4 pcs.- #406

  Brass pin tubing for chassis 10.8 mm -4/10 of an inch.

  0.95 $

• 

  DUBICK Precut Brass pin tubes, length 10.8 mm, storage tube (24 pcs.) - #407

  DUBICK Precut Brass pin tubes, length 10.8 mm, storage tube (24 pcs.) - #407

  Brass pin tubing for chassis 10.8 mm -4/10 of an inch

  5.50 $

• 

  DUBICK Diamond hone for increase inside tire diameter till 10,5 mm (0,413")

  DUBICK Diamond hone for increase inside tire diameter till 10,5 mm (0,413")

  65.00 $

• 

  DUBICK Pinion gear 48 pitch, 7T, 2 mm bore, brass (This is solder style pinion gear) - #DB501-7

  48 pitch Straight stainless steel 7 tooth pinion gears

  IN STOCK!

  
  

  2.80 $

• 

  DUBICK Lead sheet thickness 0.5 mm, 50 х 50 mm (.019", 1.968" x 1.968") with a 3M selfstick adhesive tape - #209

  DUBICK Lead sheet thickness 0.5 mm, 50 х 50 mm (.019", 1.968" x 1.968") with a 3M selfstick adhesive tape - #209

  Lead sheet thickness 0.5 mm, 50 х 50 mm with a adhesive tape can help you to configure your chassis. 
  The presence of stick layer eliminates the need for glue application and simplifies the work!

  0.90 $

• 

  DUBICK Lead sheet thickness 1 mm, 50 х 50 mm (.039", 1.968" x 1.968") with a 3M selfstick adhesive tape - #210

  DUBICK Lead sheet thickness 1 mm, 50 х 50 mm (.039", 1.968" x 1.968") with a 3M selfstick adhesive tape - #210

  Lead sheet thickness 1 mm, 50 х 50 mm with a adhesive tape can help you to configure your chassis. 
  The presence of stick layer eliminates the need for glue application and simplifies the work!

  0.90 $

• 

  DUBICK Controller chip 78 Ohm for DUBICK Electronic controller - #722-78

  DUBICK Controller chip 78 Ohm for DUBICK Electronic controller 

  12.00 $