DUBICK Engineering
-
DUBICK 4/40" x 1/8" set screws, 1 tube (12 pcs.) - #399
DUBICK 4/40" x 1/8" set screws, 1 tube (12 pcs.) - #399
Tire and gear size.
-
DUBICK 4/40" x 1/8" set screws, bulk pack of 25 pcs. - #400
DUBICK 4/40" x 1/8" set screws, bulk pack of 25 pcs. - #400
Tire and gear size.
-
DUBICK Diamond hone for increase inside tire diameter till 11 mm (0,433")
DUBICK Diamond hone for increase inside tire diameter till 11 mm (0,433")
-
DUBICK Precut Brass pin tubes, length 11.8 mm (.464"), 4 pcs. - #4081
DUBICK Precut Brass pin tubes, length 11.8 mm (.464"), 4 pcs. - #4081
-
DUBICK Tweezers stainless steel, non-magnetic - #715
DUBICK Tweezers stainless steel, non-magnetic - #715
Perfect for work with small parts!
-
DUBICK Traditional flat controller trigger - #726
DUBICK Traditional flat controller trigger - #DB726
Same as Parma finger trigger profile. Suitable for Parma, DiFalco or JK controllers. Has an additional brass tube for spring-loaded moving contact.
-
DUBICK TECH BLOCK WITH MAGNETS - #205
DUBICK TECH BLOCK WITH MAGNETS - #205
Textolite tech block for models with fixed samarium-cobalt magnets. It is made with a cut zone of guide and rear wheels. Has an even working plane.
-
DUBICK Holder for the armatures & armatures in the tubes
DUBICK Holder for the armatures & armatures in the tubes
-
DUBICK Set of contacts for the controller. Made from brass and GOLD PLATED - #714
DUBICK set of contacts for the controller. Made from brass and GOLD PLATED.
Fit for Parma, Jk and RedFox controller triggers. Full analog Parma #355D TURBO CONTACTS & TERMINALS and fit for Parma turbo controller frame.
-
DUBICK 4/40" x 1/8" set screws, tube (50 pcs.) - #401
DUBICK 4/40" x 1/8" set screws, tube (50 pcs.) - #401
Tire and gear size.
-
DUBICK VISCOSE SPONGE FOR CLEANING SOLDERING IRON TIP, 42 х 54 х 6 mm (1.65" x 2.13" x 0.24") - #212
DUBICK VISCOSE SPONGE FOR CLEANING SOLDERING IRON TIP, 42 х 54 х 6 mm (1.65" x 2.13" x 0.24") - #212
Viscose sponge for cleaning soldering iron tip
-
DUBICK Blue viscose sponge for cleaning soldering iron tip, 65 х 65 х 7 mm (2.55" x 2.55" x 0.28") - #2121
DUBICK Blue viscose sponge for cleaning soldering iron tip, 65 х 65 х 7 mm (2.55" x 2.55" x 0.28") - #2121
-
DUBICK PINION GEAR 48 PITCH, 8T, 2 mm bore, BRASS (This is press-on style pinion gear) - #501-8
DUBICK PINION GEAR 48 PITCH, 8T, 2 mm bore, BRASS
This is press-on style pinion gear
-
DUBICK 4/40" x 1/8" set screws, tube (100 pcs.) - #402
DUBICK 4/40" x 1/8" set screws, tube (100 pcs.) - #402
Tire and gear size.
-
DUBICK .01" (0.25 mm) Precision steel guide spacers, 6 pcs. - #709
DUBICK .01" (0.25 mm) Precision steel guide spacers, 6 pcs.
-
DUBICK Precut Brass pin tubes, length 11.8 mm (.464"), storage tube (24 pcs.) - #409
DUBICK Precut Brass pin tubes, length 11.8 mm (.464"), storage tube (24 pcs.) - #409
-
DUBICK LEXAN (POLYCARBONATE) FOR BODY REINFORCEMENT, W/STICKY LAYER 3M, thickness .005" (0.125 mm), size 1.968" x 9.449" (50 x 240 mm) - #2070
Lexan for body reinforcement
Parameters
- Thickness: .005" (0.125 mm)
- Size: 1.968" x 9.449" (50 x 240 mm)
- w/3M sticky layer
-
DUBICK TECH BLOCK WITHOUT MAGNETS - #2051
DUBICK TECH BLOCK WITHOUT MAGNETS - #2051
-
DUBICK Engineering 2026 F1-32 chassis assembled without ballbearings, for brushless motor - #F12026
DUBICK Engineering 2026 F1-32 chassis assembled without ballbearings, for brushless motor - #F12026
All chassis starting from 2016 will be made of German high-carbon structural steel 1 mm thick. This is the same material that is used the world's leading chassis manufacturers.
The chassis comes with a front wheels
-
DUBICK 0- 15V, 17A Power Supply. 110V or 220V. Weight 750 gr. Dimensions: 122 x 70 x 208 mm.
We are happy present our new Power Supply!
It is two power supply in one!
- In the kit there is an additional block adapter on 10 Volts and 10 Amperes, for simultaneous work with several engines or tools
- ability to accurately adjust the current and voltage.
- The range of voltage adjustment is from 0 to 15 Volts and current from 0 to 17 Amps.
- Accuracy of adjustment to 0.01 both voltage and current.
- Ability to work from 110 and 220 Volts.
- The unit can be controlled via Bluetooth.
- There is also a USB Charger with a maximum current of up to 3 Amps.
- Connection of a soldering iron is possible (possible order extra solder iron like on picture)
- Crocodile wires are included.
- The weight of the entire set of 960 grams.
- Dimensions: 122 x 70 x 208 mm. -
DUBICK DIAMOND COMMUTATOR CUTTING TOOL for arms with cup - #213
DUBICK DIAMOND COMMUTATOR CUTTING TOOL for arms with cup - #213
-
DUBICK Egineering Power supply with the ability to accurately adjust the amperage (0-12 A) and voltage (0-15 V). Input voltage 220V/110V. Dimensions: 4.803" x 2.756" x 8.189" (122 x 70 x 208 mm)
DUBICK Egineering Power supply with the ability to accurately adjust the amperage (0-12 A) and voltage (0-15 V). Input voltage 220V/110V. Dimensions: 4.803" x 2.756" x 8.189" (122 x 70 x 208 mm)
The range of voltage regulating from 0 to 15 Volts and amperage from 0 to 12 Amperes.
The adjustment accuracy is up to 0.01 both voltage and amperage.
Ability to work from 110 and 220 volts.
USB Charger.
Wires are attached.
Weight 850 Grams.
Dimensions: 4.803" x 2.756" x 8.189" (122 x 70 x 208 mm)
-
DUBICK 3 coil motor springs, steel, pair - #600
DUBICK 3 coil motor springs, steel, pair - #600
3 coil springs for group 12 and higher motors. Made from hardened steel - one pair
-
DUBICK Duralumin guide nut metric thread for JK style 3 hole wrench - #784
DUBICK Duralumin guide nut metric thread for JK style 3 hole wrench - #784
