-
ZHB ES24 22M MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,98 mm (.590"), armature Koford (or VALIKO ceramic, blue) 19/24-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB ES32 22М MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,65 mm (.577"), armature Koford (or VALIKO ceramic, blue) 25/25-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
KOLHOZA SLOT CAR BOX "SPORTSMAN WORKING PLACE" - #KZA005
Includes travel bag with wheels.
Width - 430 mm (17,3"); Height - 310 mm (12,6"); Depth - 195 mm (7,87")
All small boxes, as in the photo, are included. This sizes are good to the norms of hand luggage, so you can take the box to the cabin, which is very convenient for travels. There is no built-in lighting. All box have department for 1/32 and 1/24 models and for tools.
Cost of delivery are discussed individually
-
ZHB ES24 24M MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,98 mm (.590"), armature Koford (or VALIKO ceramic, blue) 19/24-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB F 1/32 CAHOZA 10M MOTOR
Magnet height 9,6mm (.376"), length 6.5 mm (.255"), outside diameter of magnets 14,47 mm (.570"), armature Koford (or VALIKO ceramic, blue) 45/29 ultra short Ø.465" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, Proslot brushes, Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB ES24 CAHOZA 20М MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,98 mm (.590"), armature Koford (or VALIKO ceramic, blue) 19/24-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB CAHOZA ES32 16М MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,65 mm (.577"), armature Koford (or VALIKO ceramic, blue) 25/25-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB ES24 CAHOZA 24М MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,98 mm (.590"), armature Koford (or VALIKO ceramic, blue) 19/24-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB ISRA-CLASSES RTR MODEL (model class & configuration under special order)
My assembly. Models in the assembly will cost from $300 to $500 and more.... Depending on the configuration. Those. It can be chassis DUBICK, HORKY or CASTRICONE, And motors: setups: ZHB, VALIKO, VOKI, CAHOZA, HORKY or Machkoza, with different armatures.
Delivery of any configurations is possible !!! The average price of the model is indicated.
-
KOLHOZA Slot car box "Sportsman working place" - #KZA043
KOLHOZA Slot car box "Sportsman working place"
Width - 420 (+/- 10-20 mm) - 16.53" (+/- .39"- .78")
Height - 330 (+/- 10 - 20 mm) - 12.99" (+/- .39"- .78")
Depth - 200 (+/- 10-20 mm) - 7.87" (+/- .39"- .78") -
MS-SLOTPARTS Powered brush tool for radius and slot for horizontal and verticat brushes (special order!)
MS-SLOTPARTS Powered brush tool for radius and slot for horizontal and verticat brushes (special order!)
Powered brush tool of the extra class in a noble carbon look.
For exact grinding of the radius and the slot on horizontal and vertical brushes. The tools are driven by two separate motors. External power supply 3Volt DC (not included). -
KOLHOZA CAR BALANCER - KZA007
With this car balancer you can get your car balanced to perfection. With a front and two rear scales you can adjust your chassis front to back or right to left.
-
MTT TRACK (RACE) MANAGER
Track (race) manager. Works with software SPYTECH
-
MOTOR HORKY (under order), assembly
Motors supplied under order. Delivery time from 1 month to 1 year. Also, price can change depending on the terms of delivery.
-
KOLHOZA Slot car box "Sportsman working place" - #KZA042
KOLHOZA Slot car box "Sportsman working place"
Width - 455 (+/- 10-20 mm)
Height - 330 (+/- 10 - 20 mm)
Depth - 190 (+/- 10-20 mm)Height on the stands: 380 mm, on the wheels: 455 mm
-
MainRef race manager. The most modern software for competition and training. It works with all modern Windows operating systems. Switching wires included. Fits to same connectors as SPYTECH (Fully interchangeable - compatible interface)
Was used on ISRA 2022 in Latvia.
More info will add later.
PLease, ask if you have any questions.
-
DUBICK Electronic controller FANAT Pro
DUBICK Electronic controller FANAT Pro
-suitable for all classes of models;
-antibrake, antibrake correction;
-electronic CHOKE;
-Slow Attach/ fast Attachk function (innovation!!!)
-15 chips;
-built-in voltmeter;
-gold-plated contact block;
-holders for track board;
-Transistor Correction -
S&K Deluxe controller w/anti brake & turbo, v.3 - #SK0101V3
S&K Deluxe controller w/anti brake & turbo, v.3
New Version controller, with antibrake, turbo, and traction control option. S&K Electronic Controller with Choke.
- High Quality Transistor.
- Mechanical CHOKE with 10 positions.
- 10-12 Controller chips (11-150 Ohm are possible)
- Gold plated contact group.
- Silver contact on brake and maximum positions
- Original OMHITE 3 Ohm brake rheostat and brake fuse.
- Voltmeter.
-
SPYTECH RACE MANAGER
Recognized worldwide software with a track control unit.
-
DenVel Electronics Innovative controller EVO-2
Innovative controller EVO-2 from DenVel Electronics, new design
Innovative controller EVO-2 by DenVel electronics.
A lot of abslutly new moments below about few much important- controller is regulator electric current
- 128 bands (speeds) - it make it really stable, soft and fast on corners
- wire chock 25 position
- Traction-control, By-pass,
- Works with brushless motors,
- Three type of brakes
- Dual Brake function - facilitates control in bundles of turns
- 6 cells of non-volatile memory by classes
- Possibility to chose comfortable place for trigger
- Adjustable trigger angle
-
KOBIS RACING Controller model A3
KOBIS RACING Controller model A3
Anti-brake model controller.
Suitable for all cars. Anti-Brake feature improves Open12 and Production 24 race performanceNew features in this version
- Third generation Anti-Brake system
- Improved power management system, voltage drop reduced to 0.04 V
- New brake power control
-
DUBICK Electronic controller Pro version
DUBICK Electronic controller Pro version
- -suitable for all classes of models;
- -more functional than S&K, Kobis or DiFalco controllers;
- -antibrake, antibrake correction;
- -wire CHOKE;
-traction control;
- -one or two transistors in use;
- -adjust the sharpness of the transistor;
- -15 chips;
- -built-in voltmeter;
- -gold-plated contact block;
- -full protection against incorrect switching on.
-
KOBIS RACING Controller model P1
KOBIS RACING Controller model P1
Professional model controller.
Suitable for all cars. Wire choke feature improves control of cars power and smoothness.
New features in this version
- Wire choke. Choke resistance is adjusted by 16 position rotary switch.
- Wire Choke controls cars power and smoothness.
- Choke has a wide range of adjustment from 0 to 42 foot.
- New power management system.
- New Soft Brake adjustment
-
Neotron stend for dynamic balance all types of slot car armatures. Tolerance till 0,0001 gr.
Stend for dynamic balance all types of slot car armatures.
Tolerance till 0,0001 gr.
- About us
- Delivery
- Payment
- Contacts
- Links
- RC (radio-controlled mode)
- Sign in
- Create an account
- My cart (0)
- DUBICK Engineering Chassis
- DUBICK Engineering Controllers
- ZHB (DUBICK Engineering) Setups
- KOLHOZA Tools, Equipments & Accessories
- ISRA F1/32 Legal 2023-2026 custom painted bodies by KOLHOZA
- Controllers & Controller Parts
-
Motors, Setups & Motor Parts
- Eurosport assembly motors
- Setups For Eurosport Motors
- Eurosport Classes Armatures
- Parts for Assembly Eurosports Classes Motors
- Falcon, Hawk & Johnson Motors
- Group-16D Motors & Parts
- Group-12 Motors & Parts
- Drag Motor Parts
- Motor (2 mm) Spacers
- Motor Springs
- Motor Brushes
- Ballbearings for Motors
- Shunt wires & Spring Insulations
- Chassis & parts
- Lead Wire (all)
- Guides, Lead Wire, Braid, Clips, Nuts & Spacers for Guides
- Axles, Bearings, Oilites & Axle spacers
- Screws
- Gears
- Wheels, Tire Donuts, Rims
-
Bodies, Stickers, Pins, Body Tape, Bulletproofing & Accesories
- Body Clips & Pins
- Materials For Body Reinforcement
- Lane Stickers
- Body Stickers
- Clear Interiors & Drivers
- ISRA Legal Clear Bodies
- Production 1/32 Clear Bodies
- Production 1/24 (G-12) Clear Bodies
- Formula 1/32 Clear Bodies
- Formula 1/24 Clear Bodies
- Eurosport 1/32 Clear Bodies
- Eurosport 1/24 Clear Bodies
- Open-12 1/24 Clear Bodies
- "Teapot" 1/24 Clear Bodies
- Retro 1/24 Clear Bodies
- 1/24 Clear Bodies
- GM-class (Truck) Clear Bodies
- G-7 Air Control Kits & Bodies
- Painted bodies & interiors
- Polycarbonate (Lexan) Sheet
- Fluids
-
Paint
- Painting mask (decals) for painting Kolhoza F1 Mercedes W07 Hybrid body
- TAMIYA spray paints for polycarbonate (lexan) & masking tape
- PARMA bottle paints for polycarbonate (lexan)
- Ralph Thorne Racing bottle paints for polycarbonate (Lexan)
- TayloRacing Paint Masks
- Parma Paint Masks
- TayloRacing Paint Masks for RC-models
- Tools & Equipments
- Accessories & Storage
- RTR Cars & Kits
- "Teapot" Models Kits & Parts
- Service
- Second hand
- RC-models
-
All brands
- 3M
- ALPHA
- Argentina Slot
- ARP (American Race Products)
- ASSOCIATED
- ATTAN
- B.S.V.
- B52
- BANDITO RACING
- BOLID
- BPA
- Brain Saunders
- BSR
- CAHOZA
- CAMEN Racing Products
- CHAMPION RACING
- Chicagoland Raceway
- CW bearings
- Delta Plastic
- DenVel electronics
- DIFALCO
- DUBICK Engineering
- Eagle Products
- EARacing
- FACTORY RACIN BODIES
- FRONT LINE (FL) SLOT
- FUZION (WEIGHING-MACHINE JEWELRY)
- General Electric
- GENERIC USA
- GO FAST
- GOFER RACING
- GOPHERT
- GRW
- H&R
- HAKKO
- Henkel
- HORKY
- HUDY
- INORS
- INTEGY
- JConcepts
- JK Products
- JS Car
- K&S Engineering
- KA PRODUCTS
- KELLY (PROSLOT)
- KLINGON
- KOBIS RACING
- KOFORD
- KOLHOZA
- KrickKrack
- KV
- LOCTITE (ГЕРМАНИЯ)
- Lucky Bob's Racing Products
- Magnehone
- MAIN {Solutions}
- MAKS
- MASHKOZA
- MG
- MID AMERICA
- MOSSETI
- MS-Slotparts
- MTT Products
- MURA
- NeAn
- Neotron
- Novak
- OLEG
- PARMA
- PAW BRAID
- PJ RACEWAY
- PK
- PRIME Racing
- PRO-TRACK Corporation
- PROSLOT
- Qbick
- RACERS EDGE
- Ralph Thorne Racing
- RED FOX
- REH
- RICHARD MACK
- S&K
- SCB
- Skinner
- SLICK 7
- Slot Fox
- Slot Racing Ukraine
- Slotlab
- Slotracingshop.com
- SONIC
- SPEED SHOP
- SPYTECH
- SRP (Slacker Racing Products)
- SRT SLOT
- Sveslot
- T/R
- TAMIYA
- TayloRacing
- TOP SECRET
- TQ WIRE
- Trinity
- TURNIGY
- TWP Products
- UHU
- VALIKO
- VITULA
- VOKI
- Weller
- WIHA
- Worm Jim Slot
- WRIGHTWAY
- YRE
- ZHB
- ЦМИТ "ИнТехно"