JK Lead wire 20Ga (section 0,52 mm²), purple, 3 m (10 ft) - #U68-10

Racing Lead Wire, 20AWG Ultra-Fine 0.05mm, Lightweight (10 ft)

JK Lead wire 20Ga (section 0,52 mm²), purple, 15.2 m (50 ft) - #U68-50

Racing Lead Wire, 20AWG Ultra-Fine 0.05mm, Lightweight (50 ft)

MID AMERICA Lead wire 20Ga (section 0,52 mm²), clear, 3 m (10 ft.)

Ultraflex lead wire

KOFORD Lead wire 18Ga (0,82 mm²), super ultra flex silcone, w/clips, 1 pr. - #M430

Lightweight ultraflex 413 strand 18 guage lead wire with superthin wall insulation. Reduced insulation wall thickness results a 14% weight savings over competitors lead wire. Worlds and Nat's winner. With clips

TURNIGY Lead wire 18Ga (section 0,82 mm²), black, 1 m (3 ft.)

TURNIGY Lead wire 18Ga (section 0,82 mm²), red, 1 m (3 ft.), insulation diameter .091" (2,32 mm)

KOFORD Lead wire 18Ga (0,82 mm²), super ultra flex silcone, 1 m. (3 ft.)

Lightweight ultraflex 413 strand 18 guage lead wire with superthin wall insulation. Reduced insulation wall thickness results a 14% weight savings over competitors lead wire. Three foot length of our 413 strand light weight ultraflex lead wire

CAHOZA Lead wire 18Ga (section 0,82 mm²), red, 1,5 m (5 ft) - #334

18 gauge wire, bare copper conductor, red silicon insulation, 408 strands, 5 feet

JK PINION GEAR 48 PITCH, 9T , 2 mm bore, STEEL - #P49S 

48 pitch 9 tooth solder on pinion

Old catalog #JK4209

RALPH THORNE Mini storage case, 1 cd. (5 pcs.) - #RTR-SC5

This is a 5 pack of mini storage cases with a screw on lid. These are great for holding flux, pinions, screws and more.

Motor Boxes with 2 piece yellow foam

RALPH THORNE Rectangular motor box, plastic w/foam insert

Motor storage case with a snap tight lid and foam insert. The foam will be yellow or red.

With this tubing cutting jig you can make clean cuts of your tubing and cut multiple pieces to the exact same length

Video instruction for use:

https://www.facebook.com/video.php?v=548989248562024&set=vb.100003528612947&type=2&theater

NeAn Clear body GM 1/24 Sisu

• Made from: Polyvinyl chloride (PVC);
• For: GM (Truck);
• Thickness: .015" (0.4 mm);
• Width: 3.464" (88 mm);
• Height: 3.622" (92 mm);
• Wheelbase: 4.724" - 7.283" (120 -185 mm);
• Wheels dia., till: till 1.417" (36 mm); 

Clear body, with paint mask

NeAn Clear body GM 1/24 Ford Aeromax

• Made from: Polyvinyl chloride (PVC);
• For: GM (Truck);
• Thickness: .015" (0.4 mm);
• Width: 3.464" (88 mm);
• Height: 3.543" (90 mm);
• Wheelbase: 6.299" (160 mm);
• Wheels dia., till: till 1.417" (36 mm); 

Clear body, with paint mask

Clear Production 1/32 Porsche 911 GT2 body

• Made from: Polycarbonate (Lexan)
• For: Production 1/32
• Thickness: .005" (0.125 mm)
  • Clear body, with paint mask

Clear Production 1/32 Toyota GT Four body

• Made from: Polycarbonate (Lexan)
• For: Production 1/32
• Thickness: .005" (0.125 mm)
  • Clear body, with paint mask

Clear Production 1/32 DTM GB body

• Made from: Polycarbonate (Lexan)
• For: Production 1/32
• Thickness: .005" (0.125 mm)
  • Clear body, with paint mask

NeAn Clear body GM 1/24 Jaguar

• Made from: Polyvinyl chloride (PVC);
• For: GM (Truck);
• Thickness: .015" (0.4 mm);
• Width: 3.267" (83 mm);
• Height: 2.165" (55 mm);
• Wheelbase: 4.842" (123 mm);
• Wheels dia., till: till 1.259" (32 mm); 

Clear body, with paint mask

JK Clear Body 1/24 4" Chevy Nastruck

• Made from: Polycarbonate (Lexan)
• For: 1/24 scale
• Thickness: .007" (0.175 mm)
• Clear body with paint mask

Old catalog #JK71141A

JK Clear Body 1/24 4" Super Truck-Tatra

• Made from: Polycarbonate (Lexan)
• For: 1/24 scale
• Thickness: .01" (0.25 mm)
  • Clear body with paint mask

Old catalog #JK7402B

Clear body Formula 1/32 Williams F1

• Made from: Polycarbonate (Lexan)
• For: Formula 1/32
• Thickness: .005" (0.125 mm)
• Clear body

Clear body Formula 1/32 Williams F1

• Made from: Polycarbonate (Lexan)
• For: Formula 1/32
• Thickness: .007" (0.175 mm)
• Clear body

Clear body Formula 1/32 McLaren F1

• Made from: Polycarbonate (Lexan)
• For: Formula 1/32
• Thickness: .005" (0.125 mm)
• Clear body