Wheels, Tire Donuts, Rims
-
KOFORD BRASS RETAINERS FOR .063 TUBING 1 pc. - #M536
Machined brass retainers (eyelets) for .063 tubing
Perfect fit for attaching the front wheels to the formula 1/32! (inner dia. 1.6 mm)
-
ZHB REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 33 mm, pair
REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 33 mm, pair
Suitable for the model with any height of the rear axle, if necessary, you need to remove the "crust" on the machine for processing tires or lathe.
PARAMETERS
- Inside dia., mm: 9,5
- Outside dia., mm: ~ 33
- Width, mm: 22
This tires cut for GM & F1/24 (Nesterenko)
-
ZHB REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 25 mm, pair
REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 25 mm, pair
Suitable for the model with any height of the rear axle, if necessary, you need to remove the "crust" on the machine for processing tires or lathe.
PARAMETERS
- Inside dia., mm: 9,5
- Outside dia., mm: ~ 25
- Width, mm: 22
This tires cut for GM & F1/24 (Nesterenko)
-
ZHB FRONT RUBBER TIRES, pair
FRONT RUBBER TIRES for production 1/32 & 1/24. (Best with front carbon axle)
-
S&K GEAR 48 PITCH, 40T, w/out hub for press-on 3/32" axle, (Ø21 mm)
S&K GEAR 48 PITCH, 40T, w/out hub for press-on 3/32" axle, (Ø21 mm)
This gear is made for pressing on the axle!
You can pressed-on more thick axle, if you deploy the fitment hole
-
S&K FRONT RIMS FOR TEAPOT MODELS (TA 1/24), 1 PAIR - #540
FRONT RIMS FOR TEAPOR MODELS (TA 1/24), 1 PAIR - #540
This rims is made for pressing on the axle!
PARAMETERS
- dia., mm: 14
- width for gluing tires, mm: 5,5
- total width, mm: 12
- dia. of holes for set on axle Ø2 mm., mm : 1,8
-
S&K FRONT RIMS FOR F1/24 MODELS , 1 PAIR - #541
FRONT RIMS FOR F1/24 MODELS , 1 PAIR - #541
This rims is made for pressing on the axle!
PARAMETERS
- dia.,mm: 14
- width for gluing tires, mm: 13
- total width, mm: 17,9
- dia. of holes for set on axle Ø3/32" (2.36 mm), mm : 2,2
-
ALPHA Rear wheel donuts GREEN, treated, pair - #GREENT
ALPHA Rear wheel donuts GREEN, treated, pair - #GREENT
1 pair of green treated tires for Production 1/32 or other classes
-
ALPHA REAR WHEEL TIRES SBR BEIGE, pair - #NATURAL
ALPHA REAR WHEEL TIRES SBR BEIGE, pair
1 pair of orange tires for Production 1/32 or other classes
-
Donuts EARacing, inside Ø 9.5 mm, outside ~ Ø 22 mm, length ~ 23 mm, pair
Good grip donuts for club races.
Better alternative for Pirania Light and Super Natural.
-
ALPHA Rear wheel donuts GREEN, pair - #GREEN
ALPHA Rear wheel donuts GREEN, pair - #GREEN
1 pair of green tires for Production 1/32 or other classes
-
S&K GEAR 48 PITCH, 40T, 3/32" axle, (Ø21 mm)
S&K GEAR 48 PITCH, 40T, 3/32" axle, (Ø21 mm)
-
TAYLORACING FRONT WHEEL STICKERS, set for 20 bodies, cut out along the counter - #006
FRONT WHEEL STICKERS, set for 20 bodies, cut out along the counter - #006
Very convenient stickers for preparing your bodies for the passage of a technical commission
-
PLASTIC REAR RIMS FOR 1/24 MODELS (TEAPOT CUP, F1/24, GM), 1 PAIR
PLASTIC REAR RIMS FOR 1/24 MODELS (TEAPOT CUP, F1/24, GM), 1 PAIR - #543
PARAMETERS
- axle, mm: 2,36
- dia., mm: 14
- width, mm: 16,5
-
YRE Aluminium D16T rims for 3/32" axle, width 16 mm, Ø12 mm
YRE Aluminium D16T alloy rims
- For 3/32" axle;
- Width 16 mm;
- Dia. 12 mm;
- Weight pair 1.9 g;
- Aluminium D16T alloy. Manufactured on the precision lathe. Holes milled up to 3/32". With offset of the hub, lightweight. Stiffener on the outer end.
-
S&K GEAR 64 PITCH, 49T, 0° angle, 3/32" axle, Ø20.4 mm - #G64349
The long-awaited anologue of 45 teeth gear from Horky. Maximal quantity of teeth for TEAPOT models in St.Petersburg, in which definite the min. diameter of rear wheels (22 mm) and height of rear axle - 11.5 mm.
Also, this gear perfect to GM-class.
-
JK 5/8"D 1/16"A Front Wheel Plastic, O-ring, 5 Spoke (pr) - #T125O
JK 5/8"D 1/16"A Front Wheel Plastic, O-ring, 5 Spoke (pr) - #T125O
Old catalog #JK8724
-
BSV Plastic rims for 3/32" axle, width 16 mm, Ø10.2 mm, ultra light - #BSV1610,2332lig
BSV Plastic rims
- For 3/32" axle;
- Width 16 mm;
- Dia. 10.2 mm;
- Ultra light.
-
BSV Plastic rims for 3/32" axle, width 16 mm, Ø15 mm - #BSV1615
BSV Plastic rims
- For 3/32" axle;
- Width 16 mm;
- Dia. 15 mm.
-
BSV Plastic rims for 2 mm axle, width 16 mm, Ø10.2 mm, ultra light - #BSV1610,22lig
BSV Plastic rims
- For 2 mm axle;
- Width 16 mm;
- Dia. 10.2 mm;
- Ultra light.
-
BSV Plastic rims for 2 mm axle, width 16 mm, Ø9.5 mm, w/offset of the hub, ultra light - #BSV169,52ligof
BSV Plastic rims
- For 2 mm axle;
- Width 16 mm;
- Dia. 9.5 mm;
- W/offset of the hub for ES 1/32 & Production 1/32
- Ultra light.
-
BSV Plastic rims for 2 mm axle, width 16 mm, Ø9.5 mm, ultra light - #BSV169,52lig
BSV Plastic rims
- For 2 mm axle;
- Width 16 mm;
- Dia. 9.5 mm;
- Ultra light.
-
BSV Plastic rims for 2 mm axle, width 16 mm, Ø10.2 mm, w/offset of the hub, ultra light - #BSV1610,22ligof
BSV Plastic rims
- For 2 mm axle;
- Width 16 mm;
- Dia. 10,2 mm;
- W/offset of the hub for ES 1/32 & Production 1/32
- Ultra light.
-
BSV Plastic rims for 2 mm axle, width 16 mm, Ø10.5 mm - #BSV1610,52
BSV Plastic rims
- For 2 mm axle;
- Width 16 mm;
- Dia. 10.5 mm.