Tools & Equipments
-
DUBICK Tweezers stainless steel, non-magnetic - #DB715
DUBICK Tweezers stainless steel, non-magnetic - #DB715
Perfect for work with small parts!
-
MID AMERICA Body harpoon - #MAR104
MID AMERICA Body harpoon
Body Harppon for punching pin holes in lexan bocies
-
RALPH THORNE Flux Brush, 20 pcs. - #RTRFB-20
RALPH THORNE Flux Brush, 1 pc.
This is a pack of 20 disposable flux brushes with adjustable length handles.
-
MID AMERICA Acid flux (MAR-ACID) - #MID111
MID AMERICA Acid flux (MAR-ACID) - #MID111
Highly concentrated acid Flux - super strength. Non spillable bottle.
-
KOFORD Ø.500" (12.7 mm) BEARING ASSEMBLY TOOL (for motor)- KOF188-500
In stock
One of the most used sizes for ES32 and ES24!
-
KOFORD Ø.536" (13.61 mm) BEARING ASSEMBLY TOOL (for motor)- KOF188-536
KOFORD Ø.536" (13.61 mm) BEARING ASSEMBLY TOOL (for motor)- KOF188-536
SPECIAL ORDER!
-
TAMIYA DESIGN KNIFE with 30 additional blades- #TAM74020
Special order!
-
SLOT FOX Flux brush, 1 cd. (10 pcs). - #SF40110
SLOT FOX Flux brush, 1 cd. (10 pcs). - #SF40110
-
JK Pinion gear puller T-Handle - #L17
JK Pinion gear puller T-Handle - #L17
Old catalog #JK8063
-
ZHB .050" ALLEN WRENCH W/GUIDE TOOL 9 mm, green, anodized
.050" ALLEN WRENCH, green, anodized
The necessary thing for any racers
-
WRIGHTWAY DIAMOND CUTTING TOOLS, 15 pcs. - #WW26
DIAMOND CUTTING TOOLS, 15 pcs. - #WW26
15 pieces FITS MOST MOTO TOOLS
-
INORS TAP 4/40"
TAP 4/40"
-
S&K F1 motor adjustment tool for offset crowns with 3/32" axle - #0103
CONDUCTOR FOR SET THE MOTOR ON F1, WITH THE CENTER SHIFTED DOWN BY 0,5 MM, motor shaft 1,5 mm, rear axle 3/32"
Convenient tool for accurate and fast installation of the motor on F1: fixes the center of the motor shaft and the axis, after which the motor is soldered.
-
S&K F1 motor adjustment tool for offset crowns with 2 mm axle - #0104
CONDUCTOR FOR SET THE MOTOR ON F1, WITH THE CENTER SHIFTED DOWN BY 0,5 MM, motor shaft 1,5 mm, rear axle 2 mm
Convenient tool for accurate and fast installation of the motor on F1: fixes the center of the motor shaft and the axis, after which the motor is soldered.
-
SONIC Replacement tire wrench tip .050", straight - #51-50TR
SONIC Replacement tire wrench tip .050", straight - #51-50TR
Fits most wrench handles. .050" tip fits Euro-Style wheels.
-
HAKKO REPLACEMENT TIP FOR SOLDERING IRON WELLER 40W , width 3,5 mm- #HAKT18-D32/P
HAKKO REPLACEMENT TIP FOR SOLDERING IRON WELLER 40W , width 3,5 mm- #HAKT18-D32/P
-
WRIGHTWAY DIAMOND WHEEL SET, w/holder, 5 pcs. - #WWDCD
DIAMOND WHEEL SET, w/holder, 5 pcs. - #WWDCD
-
DUBICK Engineering F1 motor adjustment tool for crowns gears with 3/32" (2.36 mm) axle, 1.5 mm motor shaft and 0.2 mm offset
DUBICK Engineering F1 motor adjustment tool for crowns gears with 3/32" (2.36 mm) axle, 1.5 mm motor shaft and 0.2 mm offset
Special for 5 and 6 teeth 72 pitch pinions. 0.2 mm offset allow instal down F1 motor for more low center of gravity, but not so dangerous like 0.5 mm offset.
-
DUBICK F1 motor adjustment tool for crowns gears with 2 mm axle, 1.5 mm motor shaft and 0.2 mm offset - #DB711
DUBICK F1 motor adjustment tool for crowns gears with 2 mm axle, 1.5 mm motor shaft and 0.2 mm offset - #DB711
Special for 5 and 6 teeth 72 pitch pinions. 0.2 mm offset allow instal down F1 motor for more low center of gravity, but not so dangerous like 0.5 mm offset.
-
WELLER REPLACEMENT TIP FOR SOLDERING IRON WELLER, width 3,81 mm, w/M6 thread - #PL133 (only order 2-4 week)
UNGPL133 - Tip Style Long Taper Chisel Tip Width O/D .15 in./3.81 mm Tip Thickness/Height/ I/D .32 in./8.13 mm Reach/Length 1.06 in./26.92 mm /
Sorry, this item avialable only for backorder 2-4 week.