Tools & Equipments
-
DUBICK DIAMOND COMMUTATOR CUTTING TOOL for arms with cup - #DB213
DUBICK DIAMOND COMMUTATOR CUTTING TOOL for arms with cup - #DB213
-
DUBICK Diamond drum for HUDY tire truer, 60 grit (grain diametr 0,250 mm) - #751
DUBICK Diamond drum for HUDY tire truer, 60 grit (grain diametr 0,250 mm) - #751
-
DUBICK diamond drum for tire truer BSV, 70 grit (grain diameter 0,315 mm) - #DB718
DUBICK Diamond drum for tire truer BSV, grain 0,3/0 mm
-
DUBICK Diamond hone for increase inside tire diameter till 11 mm (0,433")
DUBICK Diamond hone for increase inside tire diameter till 11 mm (0,433")
-
DUBICK Diamond hone for increase inside tire diameter till 10,5 mm (0,413")
DUBICK Diamond hone for increase inside tire diameter till 10,5 mm (0,413")
-
DUBICK Diamond motor brush tool (for shunting) - #766
DUBICK Diamond motor brush tool (for shunting) - #766
-
DUBICK Diamond tire file (w/big & small grain of diamond) - #767
DUBICK Diamond tire file (w/big & small grain of diamond) - #767
-
DUBICK Engineering F1 motor adjustment tool for crowns gears with 3/32" (2.36 mm) axle, 1.5 mm motor shaft and 0.2 mm offset
DUBICK Engineering F1 motor adjustment tool for crowns gears with 3/32" (2.36 mm) axle, 1.5 mm motor shaft and 0.2 mm offset
Special for 5 and 6 teeth 72 pitch pinions. 0.2 mm offset allow instal down F1 motor for more low center of gravity, but not so dangerous like 0.5 mm offset.
-
DUBICK F1 motor adjustment tool for crowns gears with 2 mm axle, 1.5 mm motor shaft and 0.2 mm offset - #DB711
DUBICK F1 motor adjustment tool for crowns gears with 2 mm axle, 1.5 mm motor shaft and 0.2 mm offset - #DB711
Special for 5 and 6 teeth 72 pitch pinions. 0.2 mm offset allow instal down F1 motor for more low center of gravity, but not so dangerous like 0.5 mm offset.
-
DUBICK MG TOOL FOR PREPARING MOTOR BRUSHES W/DIAMOND WHEEL- #DB201
A tool that every modelist needs! With it's help quickly and accurately prepare motor brushes for any motors! Comes with a diamond wheel
Tool for motor brushes (horizontal or vertical). A more advanced design of the turtle. includes anodised knurled grip and diamond coated brush radius tool diameter 5,2 mm (.208")
-
DUBICK SET OF STEEL PROBES FOR MEASUREMENT OF CLEARANCE, 20 pcs from 0,05 to 1 mm - #DB206
Thickness in set: - 0,05 mm/ 0,1 mm/ 0,15 mm/ 0,2 mm/ 0,25 mm/ 0,3 mm/ 0,35 mm/ 0,4 mm/ 0,45 mm/ 0,5 mm/ 0,55 mm/ 0,6 mm/ 0,65 mm/ 0,7 mm/ 0,75 mm/ 0,8 mm/ 0,85 mm/ 0,9 mm/ 0,95 mm/ 1 mm, respectively
The set is more than enough for the most detailed measurement of clearance!
-
DUBICK STAND FOR STORAGE WHEELS BOTTLES Ø23.5 mm (JK, Alpha), 88 х 117 mm, acrylic- #DB203-23
DUBICK STAND FOR STORAGE WHEELS BOTTLES Ø23.5 mm (JK, Alpha), 88 х 117 mm, acrylic- #DB203-23
PARAMETERS
- Dia. of wheels bottles, mm: 23,5 (JK, Alpha)
- Quantity of holes for bottles, pcs: 12
- Size, mm: 88x17
- Material: acrylic
-
DUBICK STAND FOR STORAGE WHEELS BOTTLES Ø27 mm (PSE, Alpha Large), 103 x 137 mm, acrylic - #DB203-27
DUBICK STAND FOR STORAGE WHEELS BOTTLES Ø27 mm (PSE, Alpha Large), 103 x 137 mm, acrylic - #DB203-27
PARAMETERS
- Dia. of wheels bottles, mm: 27 (PSE, Alpha Large)
- Quantity of holes for bottles, pcs: 12
- Size, mm: 103x137
- Material: acrylic
-
DUBICK TECH BLOCK WITH MAGNETS - #DB205
DUBICK TECH BLOCK WITH MAGNETS - #DB205
Textolite tech block for models with fixed samarium-cobalt magnets. It is made with a cut zone of guide and rear wheels. Has an even working plane.
-
DUBICK TECH BLOCK WITHOUT MAGNETS - #DB2051
DUBICK TECH BLOCK WITHOUT MAGNETS - #DB2051
-
DUBICK Tweezers stainless steel, non-magnetic - #DB715
DUBICK Tweezers stainless steel, non-magnetic - #DB715
Perfect for work with small parts!
-
DUBICK VISCOSE SPONGE FOR CLEANING SOLDERING IRON TIP, 42 х 54 х 6 mm (1.65" x 2.13" x 0.24") - #DB212
DUBICK VISCOSE SPONGE FOR CLEANING SOLDERING IRON TIP, 42 х 54 х 6 mm (1.65" x 2.13" x 0.24") - #DB212
Viscose sponge for cleaning soldering iron tip
-
EAGLE Track braid roller tool - #EDP105
EAGLE Track braid roller tool - #EDP105
-
GOPHERT 0- 16 volt 10 amp switching DC Power Supply. Adjustable voltage displays amps or voltage. 110v or 220v. Wires are attached. Weight is 990 gr. Dimensions: 120 x 55 x 168mm.
PARAMETERS
- Type: DC
- Input voltage, V: 110 or 220
- Adjustable voltage, V: 0-16
- Weight, gr: 990
- Dimensions, mm: 120x55x168
- Displays current
- LED display
-
HAKKO 503 SOLDERING IRON 60W 120V
The Hakko 503F-V12ED/P is a red handled 60 Watt solder iron with an ED6 screwdriver solder tip. This lightweight iron is economical and ideal for both students and hobbyists alike.
For more information you can visit the following link:
-
HAKKO Replacement tip 13/64" (5.15 mm), FX-888/907-900M/913 - #18-S3/P
Replacement tip 13/64" (5.15 mm), FX-888/907-900M/913
Chisel tip - This tip is used with the following Hakko Soldering Stations and Systems: * Hakko FX-888 Soldering Station * Hakko 907 Soldering Iron * Hakko 900M Soldering Iron * Hakko 936 Soldering Station * Hakko 937 Soldering Station