Motors, Setups & Motor Parts
-
CAHOZA G12 Motor type UL -- BLUEPRINTED- #237-ULB
Cahoza C-can motor, assembled using:
- Cahoza UL C-can #252,
- Cahoza Tornado 5 beveled magnets,
- Cahoza #263 plastic endbell with gold plated hardware,
- Cahoza spring cups,
- ball bearings both in can and endbell,
- Koford brushes,
- 3 coil teflon insulated springs,
- silver shunt wire,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 18.9 grammes
-
CAHOZA G12 Motor type UL -- GOLD - #237-UL
Cahoza C-can motor, assembled using:
- new Cahoza C-can #252,
- Cahoza Tornado 5 magnets,
- Cahoza endbell #263,
- Cahoza spring cups,
- ball bearings both in can and endbell,
- best Koford brushes,
- 3 coil teflon insulated springs,
- silver shunt wire,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 19 grammes
-
CAHOZA GOLD PLATED HORIZONTAL HARDWARE FOR F1/32 - #CAH108
CAHOZA GOLD PLATED HORIZONTAL HARDWARE FOR F1/32
NEW aluminium gold plated horizontal hardware, high precision.
-
CAHOZA GOLD PLATED VERTICAL HARDWARE FOR SPORT 32 - #CAH109
CAHOZA GOLD PLATED VERTICAL HARDWARE FOR SPORT 32
NEW aluminium gold plated vertical hardware, high precision.
-
CAHOZA HORIZONTAL ENDBELL HARDWARE, 1 set - #171
NEW GOLD PLATED HORIZONTAL HARDWARE
NEW aluminium gold plated horizontal hardware, high precision, this hardware have got larger cooling surface, deeper brush slots, another novelty is an upper little hook that ensures hardware won't tear off the endbell, hole pattern is the same as with #170, attention: before pressing the little hook to its final position, it is needed to grind out the layer of gold and nickel from upper side of the hook (0,05mm-0,1mm -
CAHOZA LIGHT PROFILE ENDBELLS - #257
New polymer light profile endbells for Cahoza C-can, available in 4 colors, weight only 0,7 grams
-
CAHOZA M1 Screw & Insulator, 1 set - #113
CAHOZA M1 Screw & Insulator, 1 set
stainless steel M1 screws, for endbells F1/32 and Sport 32, including insulators
-
CAHOZA Motor 12V - 40,000 rpm - #282
CAHOZA Motor 12V - 40,000 rpm - #282
new short can motor 12V-40,000 rpm, 320 g/cm. Armature is axially aligned to the magnetic field for the best performance and axial play between oilites is from .004" to .008". Shaft dia is 2mm.
-
CAHOZA Motor screw 0/80" stainless steel, 1 pc. - #325-1
CAHOZA Motor screw 0/80" stainless steel, 1 pc. - #325-1
use for attaching Aluminium endbells to steel cans, thread length is 1,75mm (.069"), bolt head height is 1mm (.039"), for T5 driver
-
CAHOZA Motor screw 0/80" stainless steel, 24 pcs. - #325
CAHOZA Motor screw 0/80" stainless steel, 24 pcs. - #325
use for attaching Aluminium endbells to steel cans, thread length is 1,75mm (.069"), bolt head height is 1mm (.039"), for T5 driver, packed 24 pcs per bag
-
CAHOZA PHENOLIC INSULATORS, 1 pc. - #158
PHENOLIC INSULATORS
phenolic insulators, use on all aluminium endbells -
CAHOZA Phenolic insulators, ID 1,5 mm, OD 3 mm, thick. 0,5 mm, 24 pcs. - #158
CAHOZA Phenolic insulators, ID 1,5 mm x OD 3 mm x thick. 0,5 mm, 24 pcs. - #158
phenolic insulators, use on all aluminium endbells, suitable for anodised spring posts #154, #157, inside diameter 1,5mm, outside diameter 3mm, thickness 0,5mm, packed by 24pcs
-
CAHOZA Phenolic insulators, ID 1,5 mm, OD 3 mm, thick. .012" (0,3 mm), 24 pcs. - #159
CAHOZA Phenolic insulators, ID 1,5 mm, OD 3 mm, thick. .012" (0,3 mm), 24 pcs. - #159
use on all aluminium endbells, suitable for anodised spring posts #154, #157, inside diameter 1,5mm, outside diameter 3mm, thickness 0,3mm, packed by 24pcs
-
CAHOZA Phenolic insulators, ID 1,5 mm, OD 3 mm, thick. .012" (0,3 mm), 1 pc. - #159
CAHOZA Phenolic insulators, ID 1,5 mm, OD 3 mm, thick. .012" (0,3 mm), 1 pc. - #159
use on all aluminium endbells, suitable for anodised spring posts #154, #157, inside diameter 1,5mm, outside diameter 3mm, thickness 0,3mm, packed by 24pcs
-
CAHOZA PROF GOLD PLATED BRUSH HOODS, set - #268
NEW PROFESSIONAL ALUMINIUM GOLD PLATED BRUSH HOODS
total new professional hardware (brush hoods) with heatsinks, made from hard aluminium plate with thickness of 0.4mm (.0157"), gold plated, hand work, most precise -
CAHOZA PROFI G12 Motor type O - #238-O
Cahoza C-can motor, assembled using:
- new Cahoza C-can #250,
- Cahoza Tornado 5 magnets,
- Cahoza aluminium endbell #146,
- Cahoza spring cups,
- ball bearings both in can and endbell,
- best Koford brushes,
- 3 coil teflon insulated springs,
- silver shunt wire,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 19 grammes
-
CAHOZA PROFI G12 Motor type O - bevelled - #238-OB
Cahoza C-can motor, assembled using:
- new Cahoza C-can #250,
- Cahoza Tornado 5 beveled magnets,
- Cahoza aluminium endbell #146 with gold plated hardware,
- Cahoza spring cups,
- ball bearings both in can and endbell,
- best Koford brushes,
- 3 coil teflon insulated springs,
- silver shunt wire,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 18.8 grammes
-
CAHOZA PROFI G12 Motor type U - #238-U
Cahoza C-can motor, assembled using:
- new Cahoza C-can #251,
- Cahoza Tornado 5 magnets,
- Cahoza endbell #146,
- Cahoza spring cups,
- ball bearings both in can and endbell,
- best Koford brushes,
- 3 coil teflon insulated springs,
- silver shunt wire,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 18,9 grammes
-
CAHOZA PROFI G12 Motor type UL - #238-UL
Cahoza C-can motor, assembled using:
- new Cahoza C-can #252,
- Cahoza Tornado 5 magnets,
- Cahoza endbell #146,
- Cahoza spring cups,
- ball bearings both in can and endbell,
- best Koford brushes,
- 3 coil teflon insulated springs,
- silver shunt wire,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 18,8 grammes
-
CAHOZA Setup kit - G27 Light .630" - #82
CAHOZA Setup kit - G27 Light .630" - #82
This kit contains can #80, single endbell #128 or #128-4, pair of gold plated horizontal hardware #171, pair of 5 coil anodized spring cups #157 and 4 pieces of phenolic insulators #159
-
CAHOZA Single endbell for C-Cans (G-12) - #126
CAHOZA Single endbell for C-Cans (G-12)
Aluminium hard anodised single endbell for G12 Cahoza C-cans, lightened, pattern hole drilled for hardware #170 and #171
-
CAHOZA SPORT 32 SETUP V 16 SEGMENT, 450T x .300L - can ID .577 - #101
PARAMETERS
- 16 segment magnets – bevelled 15°
- Outside dia.: .577" (14,60 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, especially altered vertical hardware, 5 coil anodised spring posts, long tower for PK arms (with commudator cap), endbell is partially milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis
-
CAHOZA SPORT 32 SETUP V 16 SEGMENT, 450T x .300L - can ID .577 - #101-A
PARAMETERS
- 16 segment magnets – bevelled 7°
- Outside dia.: .577" (14,60 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, especially altered vertical hardware, 5 coil anodised spring posts, long tower for PK arms (with commudator cap), endbell is partially milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis
-
CAHOZA SPORT 32 SETUP V 24 SEGMENT, 450T x .300L - can ID .577 - #101-B
PARAMETERS
- 16 segment magnets – bevelled 15°
- Outside dia.: .577" (14,60 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, especially altered vertical hardware, 5 coil anodised spring posts, long tower for PK arms (with commudator cap), endbell is partially milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis