Motors, Setups & Motor Parts
-
SLICK7 Be-Cu ARM SPACER .010" (0,254 mm), 10 psc. - SL7611
SL7611 - .010 thick armature spacers made from hard berrilium copper. 10 psc. ber bag.
-
SLICK7 Berrilium arm spacers .005" (0,127 mm), 10 psc. - #SL796
SLICK7 Berrilium arm spacers .005" (0,127 mm), 10 psc. - #SL796
-
SLICK7 Bronze arm spacer .007" (0,178 mm), 10 psc. - #SL7-610
SLICK7 Bronze arm spacer .007" (0,178 mm), 10 psc. - #SL7-610
-
SLICK7 PHENOLIC ARM SPACERS .010" (0,254 mm), 10 psc. - #SL7-108
Phenolic arm. spacer. Phenolic spacer and bearing shield to fit armature shaft snug! O.D. is 3/16" to cover 5 mm motor bearing and is smaller than comm. so as to not interfere with motor brushes!
-
SLICK7 SILVER SHUNT WIRE, HANK, Silver weaving - #SL7219
SILVER PLATED SHUNT WIRE
Silver weaving
-
SLICK7 Steel arm spacers .003" (0,076 mm), 10 psc. - #SL7-20
SLICK7 Steel arm spacers .003" (0,076 mm), 10 psc. - #SL7-20
-
SLICK7 TEFLON ENDBELL SCREW INSULATORS, 6 pcs. - #SL428
Teflon Insulator spacers for Aluminium Endbells, .050 ID x .110 O.D. x .015 Thick
-
SLICL7 ARMATURE (2 MM) BRONZE SPACER .030" (0.8 MM) THICK, 6 pcs. - #S7-283
ARMATURE SPACER , .030 THICK, MACHINED (NEW THICKNESS)
-
TQ 16D CAN SCREWS, SELF-TAPPING, FOR ALLEN KEY, 1 pc. - #TQ16
These are custom made of heat treated steel with .050” button heads so your gear wrench will work. The 1/8” self tapping, oversized threads will fix factory stripped endbells. If you race 16D’s, these are the only screws to use. Now chrome plated for corrosion resistance and appearance.
-
TQ 16D CAN SCREWS, SELF-TAPPING, FOR ALLEN KEY, 4 pc. - #TQ16
These are custom made of heat treated steel with .050” button heads so your gear wrench will work. The 1/8” self tapping, oversized threads will fix factory stripped endbells. If you race 16D’s, these are the only screws to use. Now chrome plated for corrosion resistance and appearance.
-
TQ SILVER SHUNT WIRE, 3 meters, Silver weaving - #TQ300
3 meters (10') silver plated copper shunt. The original 22 Gauge 3×50 «TIGHT WIND» construction is back!
Silver weaving
-
TWP 70KBB Motor - #TWP70KBB
TWP 70KBB Motor - #TWP70KBB
-
TWP C-Can setup - #TWPKMB-012
TWP C-Can setup - #TWPKMB-012
Full setup kit for G12 (C-Can group) motor.
-
VALIKO ARMATURE S-arm (ceramic, slotted blue), WINDINGS 19/24-, DIA. 0.485", STACK 0.300", ADVANCE ANGLE 28º, BALANCED, shaft 1.5 mm
PARAMETERS:
- Type: S-arm
- Wingings: 19/24-
- Dia.: 0.485"
- Stack: 0.300"
- Long (by ballbearings): 0.660"
- Advance angle: 28
- Arm.shaft: 1,5mm
-
VALIKO Armature S-arm (ceramic, slotted blue), windings 19/25, dia. 0.485", stack 0.300", advance angle 28º, balanced, shaft 1.5 mm
VALIKO Armature S-arm (ceramic, slotted blue), windings 19/25, dia. 0.485", stack 0.300", advance angle 28º, balanced, shaft 1.5 mm
-
VALIKO Armature S-arm (ceramic, slotted blue), windings 22/25, dia. 0.485", stack 0.300", advance angle 28º, balanced, shaft 1.5 mm
VALIKO Armature S-arm (ceramic, slotted blue), windings 22/25, dia. 0.485", stack 0.300", advance angle 28º, balanced, shaft 1.5 mm
-
VALIKO Armature Х-12 45º, 0.515" diam.
VALIKO Armature Х-12 45º, 0.515" diam.
-
VALIKO Armature Х-12 48º, 0.515" diam. (ISRA 2019 in UK oficial armature)
Avialable for pre-order on end of December and first half of Janure
-
VALIKO CUSTOM EUROSPORT ARMATURE TYPE S-arm (ceramic slotted blue). All parameters under special order
All PARAMETERS (from...to) under special order
(Write to us to choose what you need)
- Type: S-arm
- Wingings: various
- Dia.: 0.465"...0.472" for F32 arms
- Dia.: 0.478"...0.486" for other ES arms
- Stack: 0.236"...0.300"
- Long (by ballbearings): 0.634"...0.800"
- Advance angle: 15...28
- Arm.shaft: 1,5mm...2mm
(you can fill this form for made special order)Armatures comes after rebalancing (cost 3$).
-
VALIKO Х-12 CUSTOM armature, 0.510 - 0.518 diam. Any degree and long.
Avialable for special order
-
VITULA 2 mm, .039" (1 mm) thick, brass axle spacer, 1 pc. - #S0102-1
VITULA 2 mm, .039" (1 mm) thick, brass axle spacer, 1 pc. - #S0102-1
Spacers are precisely CNC turned from brass.
-
VITULA 2 mm, .039" (1 mm) thick, brass axle spacer, 20 pcs. - #S0102-20
VITULA 2 mm, .039" (1 mm) thick, brass axle spacer, 20 pcs. - #S0102-20
Spacers are precisely CNC turned from brass.
-
ZHB CAHOZA ES32 16М MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,65 mm (.577"), armature Koford (or VALIKO ceramic, blue) 25/25-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)