Motors, Setups & Motor Parts PROSLOT
-
PROSLOT SPEEDFX X12 BALANCED MOTOR, W/CHEAP BALANCED ARMATURE- #PS3000
Speed FX Group 12 Motor SRS C-Can - Black Endbell
Great option for the beggining racers in Production 1/24. When the work time of cheap armature came out, you can set in this can more expensive armature.
-
PROSLOT 2x5 MM CAN & ENDBELL OILITES (POWDER BRONZE), 1 pc. - #PSL2015
FX 2 X 5 Can & Endbell Replacement Oilites
-
PROSLOT PRO-SRS Blueprinted C-Can, straightened perfectly - #PS-714 Pro-SRS
PROSLOT PRO-SRS Blueprinted C-Can, straightened perfectly
-
PROSLOT SMQ (SINGLE MAGNET QUADS) MATCHED MAGNETS FOR C-CANS, pair - #PS906
SMQ (Single Magnet Quads) Matched Magnets for Proslot motors group 12.
-
PROSLOT MEGA III MATCHED MAGNETS FOR C-CANS (X-12), pair - #PS912
MEGA III Matched Blue Dot Magnets - same as our PS-908 only .450 long
Selected tool magnets for C-cans (group 12 motors)
-
PROSLOT Blueprinted C-Can straightened perfectly - #PS-714 Pro-VIP
PROSLOT Blueprinted C-Can straightened perfectly - #PS-714 Pro-VIP
-
PROSLOT SpeedFX X12 REPLACEMENT BALANCED ARMATURE - #PS3006
FX X12 Replacement Balanced Armature (commutator trued)
-
PRO SLOT MOTOR SPRINGS- DOUBLE OVERHEAD SpeedFX, 2 coils, pair, - #PSL2013
Speed Fx Motor springs - Double Overhead
-
PROSLOT X-12 C-CAN MOTOR W/38 DEGREE ARMATURE- #PS-723 38
Group 12 motor 38 degree, with VIP Can, Mega III Magnets, and on the M Blank
-
PROSLOT X-12 C-CAN MOTOR W/42 DEGREE ARMATURE- #PS-723-42
Group 12 motor 42 degree, with VIP Can, Mega III Magnets, and on the M Blank
-
PROSLOT X-12 C-CAN MOTOR W/45 DEGREE ARMATURE- #PS-723-45
Group 12 motor 45 degree, with VIP Can, Mega III Magnets, and on the M Blank
-
PROSLOT Endbell with oilite bushing for PROSLOT C-CANS, (w/out brush hoods & cans) - #PS711
PROSLOT Endbell with oilite bushing for PROSLOT C-CANS, (w/out brush hoods & cans)
-
PROSLOT EUROSPORT ARMATURES, PARAMETERS UNDER SPECIAL ORDER
All PARAMETERS under special order
(Write to us to choose what you need)
- Wingings
- Dia.
- Stack
- Long (by ballbearings)
- Advance angle
- Arm.shaft: 1,5mm
(you can fill this form for made special order)
Armatures comes after rebalancing (cost 3$).
-
PROSLOT Euro MK1 Motor blue printed sealed with american made armature - #PS-4002B
PROSLOT Euro MK1 motor blue printed sealed
Euro MK 1 Motor - with American made PD (Puppy Dog) armature as used in retro can am racing
-
PROSLOT C-Can assembled endbell (w/copper hardware) - #PS-618
PROSLOT C-Can assembled endbell w/copper hardware aligned and honed - undrilled - #PS-618
-
PROSLOT Purple dot MegaMaster 6-mag magnets - #PS-909S
PROSLOT Purple dot MegaMaster 6-mag magnets - #PS-909S
Magnets only!
-
PROSLOT Magnet Clips for C-cans,1 pc. - #PS640
PROSLOT Magnet Clips for C-cans, 1 pc.
This is the clips for all 12-group (C-cans) motors.
-
PROSLOT HARDWARE FOR PROSLOT MOTORS X-12 GROUP, W/SPRING CUPS & SCREWS- #PS642
Hardware set complete -includes hardware, oilite, spring cups and screws
-
PROSLOT BRUSH HOOD/ HEAT SINK SET FOR PROSLOT MOTOR (X-12 GROUP), W/OUT SPRING CUPS & SCREWS- #PS641
Brush Hood & Heat Sink set
-
PROSLOT SpeedFX 16D/S16D SETUP - #PS 2004
FX 16D/S16D Motor Setup
-
PROSLOT 16D/S16D MOTOR CAN - #PS2005
Proslot can for 16D motors, w/out magnets
-
PROSLOT SPEED FX S16D BLUEPRINT SETUP, W/MATCHED MAGNETS - #PS 2100
SpeedFX 16D/S16D Blueprinted Setup with Matched Magnets. The setup includes straightened can, soldered oilite, aligned and honed brush hoods and matched magnets.
-
PROSLOT 16D/S16D REPLACEMENT POLYMER ENDBELL - #PS 2008
16D/S16D REPLACEMENT POLYMER ENDBELL
-
PROSLOT SpeedFX matched magnets for D-cans (16D) - #PS2016
SPEEDFX MATCHED MAGNETS FOR D-CANS (16D) (1 pr.)
























