Motors, Setups & Motor Parts PROSLOT
-
PROSLOT SPEEDFX X12 BALANCED MOTOR, W/CHEAP BALANCED ARMATURE- #PS3000
Speed FX Group 12 Motor SRS C-Can - Black Endbell
Great option for the beggining racers in Production 1/24. When the work time of cheap armature came out, you can set in this can more expensive armature.
-
PROSLOT 2x5 MM CAN & ENDBELL OILITES (POWDER BRONZE), 1 pc. - #PSL2015
FX 2 X 5 Can & Endbell Replacement Oilites
-
PROSLOT PRO-SRS Blueprinted C-Can, straightened perfectly - #PS-714 Pro-SRS
PROSLOT PRO-SRS Blueprinted C-Can, straightened perfectly
-
PROSLOT SMQ (SINGLE MAGNET QUADS) MATCHED MAGNETS FOR C-CANS, pair - #PS906
SMQ (Single Magnet Quads) Matched Magnets for Proslot motors group 12.
-
PROSLOT MEGA III MATCHED MAGNETS FOR C-CANS (X-12), pair - #PS912
MEGA III Matched Blue Dot Magnets - same as our PS-908 only .450 long
Selected tool magnets for C-cans (group 12 motors)
-
PROSLOT Blueprinted C-Can straightened perfectly - #PS-714 Pro-VIP
PROSLOT Blueprinted C-Can straightened perfectly - #PS-714 Pro-VIP
-
PROSLOT SpeedFX S16D BALANCED MOTOR - #PS-2001
PROSLOT SpeedFX S16D BALANCED MOTOR - #PS-2001
Universal motor with a wide range of uses and wide possibilities of upgrades.
It is used, as in the simplest models of "Teapot", and in models of trucks. Depending on the ratio and the installed optional armature, the Production class 1/24 is also suitable.
-
PROSLOT SpeedFX X12 REPLACEMENT BALANCED ARMATURE - #PS3006
FX X12 Replacement Balanced Armature (commutator trued)
-
PRO SLOT MOTOR SPRINGS- DOUBLE OVERHEAD SpeedFX, 2 coils, pair, - #PSL2013
Speed Fx Motor springs - Double Overhead
-
PROSLOT X-12 C-CAN MOTOR W/38 DEGREE ARMATURE- #PS-723 38
Group 12 motor 38 degree, with VIP Can, Mega III Magnets, and on the M Blank
-
PROSLOT X-12 C-CAN MOTOR W/42 DEGREE ARMATURE- #PS-723-42
Group 12 motor 42 degree, with VIP Can, Mega III Magnets, and on the M Blank
-
PROSLOT X-12 C-CAN MOTOR W/45 DEGREE ARMATURE- #PS-723-45
Group 12 motor 45 degree, with VIP Can, Mega III Magnets, and on the M Blank
-
PROSLOT Endbell with oilite bushing for PROSLOT C-CANS, (w/out brush hoods & cans) - #PS711
PROSLOT Endbell with oilite bushing for PROSLOT C-CANS, (w/out brush hoods & cans)
-
PROSLOT EUROSPORT ARMATURES, PARAMETERS UNDER SPECIAL ORDER
All PARAMETERS under special order
(Write to us to choose what you need)
- Wingings
- Dia.
- Stack
- Long (by ballbearings)
- Advance angle
- Arm.shaft: 1,5mm
(you can fill this form for made special order)
Armatures comes after rebalancing (cost 3$).
-
PROSLOT Euro MK1 Motor blue printed sealed with american made armature - #PS-4002B
PROSLOT Euro MK1 motor blue printed sealed
Euro MK 1 Motor - with American made PD (Puppy Dog) armature as used in retro can am racing
-
PROSLOT C-Can assembled endbell (w/copper hardware) - #PS-618
PROSLOT C-Can assembled endbell w/copper hardware aligned and honed - undrilled - #PS-618
-
PROSLOT Purple dot MegaMaster 6-mag magnets - #PS-909S
PROSLOT Purple dot MegaMaster 6-mag magnets - #PS-909S
Magnets only!
-
PROSLOT Magnet Clips for C-cans,1 pc. - #PS640
PROSLOT Magnet Clips for C-cans, 1 pc.
This is the clips for all 12-group (C-cans) motors.
-
PROSLOT HARDWARE FOR PROSLOT MOTORS X-12 GROUP, W/SPRING CUPS & SCREWS- #PS642
Hardware set complete -includes hardware, oilite, spring cups and screws
-
PROSLOT BRUSH HOOD/ HEAT SINK SET FOR PROSLOT MOTOR (X-12 GROUP), W/OUT SPRING CUPS & SCREWS- #PS641
Brush Hood & Heat Sink set
-
PROSLOT SpeedFX 16D/S16D SETUP - #PS 2004
FX 16D/S16D Motor Setup
-
PROSLOT 16D/S16D MOTOR CAN - #PS2005
Proslot can for 16D motors, w/out magnets
-
PROSLOT SPEED FX S16D BLUEPRINT SETUP, W/MATCHED MAGNETS - #PS 2100
SpeedFX 16D/S16D Blueprinted Setup with Matched Magnets. The setup includes straightened can, soldered oilite, aligned and honed brush hoods and matched magnets.
-
PROSLOT 16D/S16D REPLACEMENT POLYMER ENDBELL - #PS 2008
16D/S16D REPLACEMENT POLYMER ENDBELL
