Motors, Setups & Motor Parts KOFORD

• 

  KOFORD ALUMINUM SPRING CUPS (for 3 coils spring) ON ENDBELLS FOR EUROSPORT MOTORS, pair - #281

  Self centering ultra light aluminum alloy spring cups for Koford set ups

  1.23 €

• 

  KOFORD .003" (0.076 MM) THICK, BRONZE ARM (2 MM) SPACER, 12 pcs. - #M266

  .003 phosphor bronze spacers,Ultra precision fit on armature shaft to eliminate vibration due to loose fit, phosphor bronze is very hard but will not stick to magnets, 12 per bag

  4.24 €

• 

  KOFORD Flanged bushing 2 x 5 mm for can & endbell, 1 pc. - #M509

  KOFORD Flanged bushing 2 x 5 mm for can & endbell, 1 pc. - #M509

  5MM flanged bushing for Super Feather can & endbell.

  0.00 €

• 

  KOFORD HAWK MOTOR W/KOFORD 12 ARM - KOF647

   JK Hawk motor with Koford 12 arm, Super Big Foot 2 brushes and silver conductive springs.

  62.44 €

• 

  KOFORD Hawk 12 motor w/bonded neo magnets - #M712

  KOFORD Hawk 12 motor w/bonded neo magnets - #M712

  JK Hawk motor with with bonded Neo magnets and Koford 12 arm, Super Big Foot 2 brushes and silver conductive springs

  63.34 €

• 

  KOFORD Ultra G12 blueprinted motor with shunts and can ball bearing - #M527B

  KOFORD Ultra G12 blueprinted motor with shunts and can ball bearing - #M527B

  Lightweight can and .450 long magnets. Motor is blueprinted and assembled by Koford craftsmen with premium brushes and fully broken in.

  102.21 €

• 

  KOFORD .007" (0.178 MM) THICK, ALUMINUM ARM (2 MM) SPACER, 12 pcs. - #M249

  .007" aluminum arm spacers, 1/3 the weight of bronze, brass or steel. Use between bronze spacers so as to provide necessary support, 12 per bag.

  4.24 €

• 

  KOFORD .007" (0,178 MM) THICK, BRONZE ARM (2 MM) SPACER, 12 pcs. - #M265

   .007" phosphor bronze spacers, Ultra precision fit on armature shaft to eliminate vibration due to loose fit, phosphor bronze is very hard but will not stick to magnets. 12 per bag.

  4.24 €

• 

  KOFORD ARMATURE ULTRASHORT FOR F1/32, WINDINGS 45/29, DIA. 0.459", STACK 0.235", ADVANCE ANGLE 18º, BALANCED, shaft lapping to 1.5 mm - M255EH (CUSTOM)

  ARMATURE ULTRASHORT FOR F1/32, 45/29, BALANCED, H blank ultrashort custom Euro arm with angled comm tabs for F1

  PARAMETERS:

  • Wingings: 45/29
  • Dia.: 0.459"
  • Stack: 0.235"
  • Long (by ballbearings): 0.664"
  • Advance angle: 18

  
  

  113.33 €

• 

  KOFORD Matched .450" long x .150" thick C-Can magnets with new (stronger) orientation, pair - #M606

  KOFORD Matched .450" long x .150" thick C-Can magnets with new (stronger) orientation, pair - #M606

  Precision matched. Recommended for wing racing. 

  12.83 €

• 

  KOFORD Matched .450" long x .155" thick C-Can magnets with new (stronger) orientation, pair - #M607

  KOFORD Matched .450" long x .155" thick C-Can magnets with new (stronger) orientation, pair - #M607

  Matched .450 long x .155 thick C can magnets with new (stronger) orientation. Especially recommended for G12 wing car racing with the M528 can.

  12.83 €

• 

  KOFORD ARMATURE ULTRASHORT FOR F1/32, WINDINGS 45/29, DIA. 0.465", STACK 0.235", ADVANCE ANGLE 18º, BALANCED, shaft lapping to 1.5 mm - M255EH (CUSTOM)

  ARMATURE ULTRASHORT FOR F1/32, 45/29, BALANCED, H blank ultrashort custom Euro arm with angled comm tabs for F1

  PARAMETERS:

  • Wingings: 45/29
  • Dia.: 0.465"
  • Stack: 0.235"
  • Long (by ballbearings): 0.664"
  • Advance angle: 18

  113.33 €

• 

  KOFORD ARMATURE ULTRASHORT FOR F1/32, WINDINGS 49/28, DIA. 0.465", STACK 0.235", ADVANCE ANGLE 20º, BALANCED, shaft lapping to 1.5 mm - M255EH (CUSTOM)

  ARMATURE ULTRASHORT FOR F1/32, 49/28, BALANCED, H blank ultrashort custom Euro arm with angled comm tabs for F1

  • PARAMETERS:

    • Wingings: 49/28
    • Dia.: 0.465"
    • Stack: 0.235"
    • Long (by ballbearings): 0.664"
    • Advance angle: 20

  113.33 €

• 

  KOFORD ARMATURE ULTRASHORT FOR F1/32, WINDINGS 49/30, DIA. 0.465", STACK 0.235", ADVANCE ANGLE 28º, BALANCED, shaft lapping to 1.5 mm - M255EH (CUSTOM)

  ARMATURE ULTRASHORT FOR F1/32, 49/30, BALANCED, H blank ultrashort custom Euro arm with angled comm tabs for F1

  PARAMETERS:

  • Wingings: 49/30
  • Dia.: 0.465"
  • Stack: 0.235"
  • Long (by ballbearings): 0.664"
  • Advance angle: 28

  113.33 €

• 

  KOFORD 760" LONG, C12 ARMATURE (for set in Eurosport motors) - #М467-12C

  race arm, 32° .490 C12 arm .760 long, 2006 Nat’s winner Pro

  Alternative to expensive Eurosport class armatures. Suitable for all setups, except the latest micro-motors for F 1/32.

  41.99 €

• 

  KOFORD ES SETUP 10M, outside dia. .620" (15.75 mm), magnets height .430" (10.9 mm), magnets length .250" (6.35 mm), f/armature Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm) - M283-E10-250

  ES SETUP 10 MAGNETS

  PARAMETERS

  • Magnets quantity: 10
  • Outside dia.: .620" (15.75 mm)
  • Magnets height: .430" (10.9 mm)
  • Magnets length: .250" (6.35 mm)
  • For armature: Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm)

  236.45 €

• 

  KOFORD ES SETUP 10M, outside dia. .620" (15.75 mm), magnets height .430" (10.9 mm), magnets length .300" (7.62 mm), f/armature Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm) - M283-E10-300

  ES SETUP 10 MAGNETS

  ISRA 2014 World's champion in class Eurosport 1/32

  PARAMETERS

  • Magnets quantity: 10
  • Outside dia.: .620" (15.75 mm)
  • Magnets height: .430" (10.9 mm)
  • Magnets length: .300" (7.62 mm)
  • For armature: Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm)

  240.57 €

• 

  KOFORD ES SETUP TOOL, outside dia. .620" (15.75 mm), magnets height .430" (10.9 mm), magnets length .250" (6.35 mm), f/armature Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm) - M283-ES-250

  ES SETUP TOOL

  PARAMETERS

  • Magnets quantity: 2
  • Outside dia.: .620" (15.75 mm)
  • Magnets height: .430" (10.9 mm)
  • Magnets length: .250" (6.35 mm)
  • For armature: Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm)

  189.31 €

• 

  KOFORD 0-80X3/32 ALUMINUM CAN & ENDBELLS SCREWS, FOR ALLEN KEY, 4 pcs. - #M256-4

  0-80 aluminum endbell and can screws, anodized to resist corrosion, 1/3 the weight of steel. Use standard wheel wrench to tighten. Reduces stripping of endbell threads compared to steel screws

  2.96 €

• 

  KOFORD Ultrastrong radial C-Can drag magnets- #M592

  KOFORD Ultrastrong radial C-Can drag magnets

  Ultrastrong radial drag magnets, when used with M593 treated can produces 4% more flux then competitors wide can and .170 thick quad magnets without the problems of nonstandard size cans. .165 thick x .520 long

  28.45 €

• 

  KOFORD ARMATURE M199SAW CUSTOM EURO ARMS, - M199SAW Custom Euro arms

  All PARAMETERS (from...to) under special order

  (Write to us to choose what you need)

  • Wingings: various
  • Dia.: 0.459"...0.490"
  • Stack: 0.235"...0.300"
  • Long (by ballbearings): 0.634"...0.800"
  • Advance angle: 15...28
  • Arm.shaft: 1,5mm...2mm

  
  (you can fill this form for made special order)

  Armatures comes after rebalancing (cost 3$).

  120.65 €

• 

  KOFORD TRI-STAR DIA .518" BOX X-12 ARM 38 DEG - #468-BOX-38

  Tri-Star G12 arm .518 diameter 38° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability

  63.18 €

• 

  KOFORD 0-80X3/32 ALUMINUM CAN & ENDBELLS SCREWS, FOR ALLEN KEY, 24 pcs. - #M256

   0-80 aluminum endbell and can screws, anodized to resist corrosion, 1/3 the weight of steel. Use standard wheel wrench to tighten. Reduces stripping of endbell threads compared to steel screws. Easy open box of 24.

  17.78 €

• 

  KOFORD SETUP FOR EUROSPORT MOTORS, EXTERNAL DIA. .620" (15.75 MM), HEIGHT .430" (10.9 MM), NICKEL-PLATED -#M652

  SETUP FOR ASSEMBLY EUROSPORT MOTORS, NICKEL-PLATED

  PARAMETERS:

  • EXTERNAL DIA. .620" (15.75 MM)
  • HEIGHT .430" (10.9 MM)

  40.14 €