Главная → Motors, Setups & Motor Parts → KOFORD

Motors, Setups & Motor Parts KOFORD

Sort by default price name

KOFORD ALUMINUM SPRING CUPS (for 3 coils spring) ON ENDBELLS FOR EUROSPORT MOTORS, pair - #281

Self centering ultra light aluminum alloy spring cups for Koford set ups

1.29 $
KOFORD .003" (0.076 MM) THICK, BRONZE ARM (2 MM) SPACER, 12 pcs. - #M266

.003 phosphor bronze spacers,Ultra precision fit on armature shaft to eliminate vibration due to loose fit, phosphor bronze is very hard but will not stick to magnets, 12 per bag

4.46 $
KOFORD Flanged bushing 2 x 5 mm for can & endbell, 1 pc. - #M509

KOFORD Flanged bushing 2 x 5 mm for can & endbell, 1 pc. - #M509
5MM flanged bushing for Super Feather can & endbell.

0.00 $
KOFORD HAWK MOTOR W/KOFORD 12 ARM - KOF647

JK Hawk motor with Koford 12 arm, Super Big Foot 2 brushes and silver conductive springs.

65.73 $
KOFORD Hawk 12 motor w/bonded neo magnets - #M712

KOFORD Hawk 12 motor w/bonded neo magnets - #M712
JK Hawk motor with with bonded Neo magnets and Koford 12 arm, Super Big Foot 2 brushes and silver conductive springs

66.67 $
KOFORD Ultra G12 blueprinted motor with shunts and can ball bearing - #M527B

KOFORD Ultra G12 blueprinted motor with shunts and can ball bearing - #M527B
Lightweight can and .450 long magnets. Motor is blueprinted and assembled by Koford craftsmen with premium brushes and fully broken in.

107.59 $
KOFORD .007" (0.178 MM) THICK, ALUMINUM ARM (2 MM) SPACER, 12 pcs. - #M249

.007" aluminum arm spacers, 1/3 the weight of bronze, brass or steel. Use between bronze spacers so as to provide necessary support, 12 per bag.

4.46 $
KOFORD .007" (0,178 MM) THICK, BRONZE ARM (2 MM) SPACER, 12 pcs. - #M265

.007" phosphor bronze spacers, Ultra precision fit on armature shaft to eliminate vibration due to loose fit, phosphor bronze is very hard but will not stick to magnets. 12 per bag.

4.46 $
KOFORD ARMATURE ULTRASHORT FOR F1/32, WINDINGS 45/29, DIA. 0.459", STACK 0.235", ADVANCE ANGLE 18º, BALANCED, shaft lapping to 1.5 mm - M255EH (CUSTOM)
ARMATURE ULTRASHORT FOR F1/32, 45/29, BALANCED, H blank ultrashort custom Euro arm with angled comm tabs for F1
PARAMETERS:
- Wingings: 45/29
- Dia.: 0.459"
- Stack: 0.235"
- Long (by ballbearings): 0.664"
- Advance angle: 18
119.29 $
KOFORD Matched .450" long x .150" thick C-Can magnets with new (stronger) orientation, pair - #M606

KOFORD Matched .450" long x .150" thick C-Can magnets with new (stronger) orientation, pair - #M606
Precision matched. Recommended for wing racing.

13.50 $
KOFORD Matched .450" long x .155" thick C-Can magnets with new (stronger) orientation, pair - #M607

KOFORD Matched .450" long x .155" thick C-Can magnets with new (stronger) orientation, pair - #M607
Matched .450 long x .155 thick C can magnets with new (stronger) orientation. Especially recommended for G12 wing car racing with the M528 can.

13.50 $
KOFORD ARMATURE ULTRASHORT FOR F1/32, WINDINGS 45/29, DIA. 0.465", STACK 0.235", ADVANCE ANGLE 18º, BALANCED, shaft lapping to 1.5 mm - M255EH (CUSTOM)
ARMATURE ULTRASHORT FOR F1/32, 45/29, BALANCED, H blank ultrashort custom Euro arm with angled comm tabs for F1
PARAMETERS:
- Wingings: 45/29
- Dia.: 0.465"
- Stack: 0.235"
- Long (by ballbearings): 0.664"
- Advance angle: 18
119.29 $
KOFORD ARMATURE ULTRASHORT FOR F1/32, WINDINGS 49/28, DIA. 0.465", STACK 0.235", ADVANCE ANGLE 20º, BALANCED, shaft lapping to 1.5 mm - M255EH (CUSTOM)
ARMATURE ULTRASHORT FOR F1/32, 49/28, BALANCED, H blank ultrashort custom Euro arm with angled comm tabs for F1
- PARAMETERS:
  - Wingings: 49/28
  - Dia.: 0.465"
  - Stack: 0.235"
  - Long (by ballbearings): 0.664"
  - Advance angle: 20
119.29 $
KOFORD ARMATURE ULTRASHORT FOR F1/32, WINDINGS 49/30, DIA. 0.465", STACK 0.235", ADVANCE ANGLE 28º, BALANCED, shaft lapping to 1.5 mm - M255EH (CUSTOM)
ARMATURE ULTRASHORT FOR F1/32, 49/30, BALANCED, H blank ultrashort custom Euro arm with angled comm tabs for F1
PARAMETERS:
- Wingings: 49/30
- Dia.: 0.465"
- Stack: 0.235"
- Long (by ballbearings): 0.664"
- Advance angle: 28
119.29 $
KOFORD 760" LONG, C12 ARMATURE (for set in Eurosport motors) - #М467-12C

race arm, 32° .490 C12 arm .760 long, 2006 Nat’s winner Pro
Alternative to expensive Eurosport class armatures. Suitable for all setups, except the latest micro-motors for F 1/32.

44.20 $
KOFORD ES SETUP 10M, outside dia. .620" (15.75 mm), magnets height .430" (10.9 mm), magnets length .250" (6.35 mm), f/armature Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm) - M283-E10-250
ES SETUP 10 MAGNETS
PARAMETERS
- Magnets quantity: 10
- Outside dia.: .620" (15.75 mm)
- Magnets height: .430" (10.9 mm)
- Magnets length: .250" (6.35 mm)
- For armature: Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm)
248.89 $
KOFORD ES SETUP 10M, outside dia. .620" (15.75 mm), magnets height .430" (10.9 mm), magnets length .300" (7.62 mm), f/armature Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm) - M283-E10-300
ES SETUP 10 MAGNETS
ISRA 2014 World's champion in class Eurosport 1/32
PARAMETERS
- Magnets quantity: 10
- Outside dia.: .620" (15.75 mm)
- Magnets height: .430" (10.9 mm)
- Magnets length: .300" (7.62 mm)
- For armature: Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm)
253.23 $
KOFORD ES SETUP TOOL, outside dia. .620" (15.75 mm), magnets height .430" (10.9 mm), magnets length .250" (6.35 mm), f/armature Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm) - M283-ES-250
ES SETUP TOOL
PARAMETERS
- Magnets quantity: 2
- Outside dia.: .620" (15.75 mm)
- Magnets height: .430" (10.9 mm)
- Magnets length: .250" (6.35 mm)
- For armature: Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm)
199.27 $
KOFORD 0-80X3/32 ALUMINUM CAN & ENDBELLS SCREWS, FOR ALLEN KEY, 4 pcs. - #M256-4

0-80 aluminum endbell and can screws, anodized to resist corrosion, 1/3 the weight of steel. Use standard wheel wrench to tighten. Reduces stripping of endbell threads compared to steel screws

3.12 $
KOFORD Ultrastrong radial C-Can drag magnets- #M592

KOFORD Ultrastrong radial C-Can drag magnets
Ultrastrong radial drag magnets, when used with M593 treated can produces 4% more flux then competitors wide can and .170 thick quad magnets without the problems of nonstandard size cans. .165 thick x .520 long

29.95 $
KOFORD ARMATURE M199SAW CUSTOM EURO ARMS, - M199SAW Custom Euro arms
All PARAMETERS (from...to) under special order
(Write to us to choose what you need)
- Wingings: various
- Dia.: 0.459"...0.490"
- Stack: 0.235"...0.300"
- Long (by ballbearings): 0.634"...0.800"
- Advance angle: 15...28
- Arm.shaft: 1,5mm...2mm
(you can fill this form for made special order)
Armatures comes after rebalancing (cost 3$).
127.00 $
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 38 DEG - #468-BOX-38

Tri-Star G12 arm .518 diameter 38° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability

66.50 $
KOFORD 0-80X3/32 ALUMINUM CAN & ENDBELLS SCREWS, FOR ALLEN KEY, 24 pcs. - #M256

0-80 aluminum endbell and can screws, anodized to resist corrosion, 1/3 the weight of steel. Use standard wheel wrench to tighten. Reduces stripping of endbell threads compared to steel screws. Easy open box of 24.

18.72 $
KOFORD SETUP FOR EUROSPORT MOTORS, EXTERNAL DIA. .620" (15.75 MM), HEIGHT .430" (10.9 MM), NICKEL-PLATED -#M652
SETUP FOR ASSEMBLY EUROSPORT MOTORS, NICKEL-PLATED
PARAMETERS:
- EXTERNAL DIA. .620" (15.75 MM)
- HEIGHT .430" (10.9 MM)
42.25 $
KOFORD S.B.F. II Horizontal motor brushes, pair - #M486

Traditional brushes for motor, they have a little more density, compared to brushes PROSLOR - #PS-901 accordingly more are erased, but the collector wears out more.
In ISRA classes motors it is customary to establish BIGFOOT brush on "+" and a brush manufactured by PROSLOT on "-". Thus, it is possible to achieve the most uniform wear of the brushes. Regardless of this, as practice shows, the plus brush should be changed 2 times more often.

4.50 $
KOFORD S.B.F. II premium horizontal brushes, 1 cd. ( 6 pr.) - #M485

KOFORD S.B.F. II premium horizontal brushes, 1 cd. ( 6 pr.) - #M485
S.B.F. II Horizontal brushes for 16D, Super 16D, Competitor, etc. The Worlds best motor brush, winner of countless World and National championships. These are the brushes which our M476 and M244 brushes are machined from.

21.00 $
KOFORD Premium horizontal SBF II brushes (for C12, G27) w/precision ground shunt slot, 1 cd. (6 pr.) - #M476

KOFORD Premium horizontal SBF II brushes (for C12, G27) w/precision ground shunt slot, 1 cd. (6 pr.) - #M476
Now shortened and ready to use. Use with M313 light tension or M276 heavy tension springs and M329 or M295 heat transfer compound.

23.75 $
KOFORD HARD PREMIUM BRUSHES BIGFOOT, VERTICAL, pair - #M244A

Hard premium brushes for vertical brush hoods, open and group classes
Prepared for installation in vertical brush hoods brushes.

3.99 $
KOFORD HARD PREMIUM BRUSHES BIGFOOT, VERTICAL, 6 pairs - #M244A

Hard premium brushes for vertical brush hoods, open and group classes
6 pairs prepared for installation in vertical brush hoods brushes packed in easy opened box.

23.94 $
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 40 DEG - #468-BOX-40

Tri-Star G12 arm .518 diameter 40° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability

57.50 $
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 42 DEG - #468-BOX-42

Tri-Star G12 arm .518 diameter 42° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability

66.50 $
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 44 DEG - #468-BOX-44

Tri-Star G12 arm .518 diameter 44° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability

57.50 $
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 45 DEG - #468-BOX-45

Tri-Star G12 arm .518 diameter 45° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability

66.50 $
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 46 DEG - #468-BOX-46

Tri-Star G12 arm .518 diameter 46° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability

66.50 $
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 47 DEG - #468-BOX-47

Tri-Star G12 arm .518 diameter 47° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability

66.50 $
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 48 DEG - #468-BOX-48

Tri-Star G12 arm .518 diameter 48° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability

57.50 $
KOFORD Tri-Star dia. .518" Handwound X-12 ARM 45 deg. - #M468-H12

KOFORD Tri-Star dia. .518" Handwound X-12 ARM 45 deg. - #M468-H12
Hand wound on the Koford Tri Star blank for the ultimate in performance. Features reduced winding resistance and weight. Super hard shaft for long armature life.

71.80 $
KOFORD Tri-Star dia. .518" Handwound X-12 ARM 48 deg. - #M468-H12

KOFORD Tri-Star dia. .518" Handwound X-12 ARM 48 deg. - #M468-H12
Hand wound on the Koford Tri Star blank for the ultimate in performance. Features reduced winding resistance and weight. Super hard shaft for long armature life.

71.80 $
KOFORD Neo top gun C-Can drag magnets - #M596

KOFORD Neo top gun C-Can drag magnets - #M596

49.95 $
KOFORD SELF TAP MOTOR SCREWS, 4 pcs. - #M466-4

Self tapping Box Stock can & endbell screws. 1/8" long for minimum weight and to provide can screw clearance on Feather set ups. Tighten with standard wheel wrench.
Suitable for everyone plastic endbells, besides endbells CAHOZA

1.28 $
KOFORD SELF TAP MOTOR SCREWS, 24 pcs. - #M466

Self tapping Box Stock can & endbell screws. 1/8" long for minimum weight and to provide can screw clearance on Feather set ups. Tighten with standard wheel wrench. 24 psc.
Suitable for everyone plastic endbells, besides endbells CAHOZA

7.68 $
KOFORD REPLACEMENT ARMATURE FOR JK HAWK - #M644

Koford replacement arm for JK Hawk. Plated better then drill blank shaft, 800° epoxy. Requires JK replacement endbell for Koford arms.

43.32 $
KOFORD G12 Armature for Hawk6 Neo Magnet Setup Only 40 Degrees - #M645-12-40

G12 arm to fit JK Hawk 6 bonded neo magnet set up. Better then drill blank shaft, 800° epoxy. 40° timing. recommended for neo magnet set ups only.

51.60 $
KOFORD ENBELL FOR SETUP KOFORD M652 UNDER ARMATURE W/RING - #M287L

ENBELL FOR SETUP KOFORD #M652 UNDER ARMATURE W/RING - #M287L

24.98 $
KOFORD Teflon® spring insulation, 30 cm - #M267

KOFORD Teflon® spring insulation, 30 cm - #M267
Teflon® spring insulation, perfect fit on springs

0.79 $

Motors, Setups & Motor Parts KOFORD

All brands: