Lead Wire
-
KOFORD Lead wire 18Ga (0,82 mm²), super ultra flex silcone, 1 m. (3 ft.) - #M431
KOFORD Lead wire 18Ga (0,82 mm²), super ultra flex silcone, 1 m. (3 ft.)
Lightweight ultraflex 413 strand 18 guage lead wire with superthin wall insulation. Reduced insulation wall thickness results a 14% weight savings over competitors lead wire. Three foot length of our 413 strand light weight ultraflex lead wire
-
CAHOZA Lead wire 18Ga (section 0,82 mm²), red, 1,5 m (5 ft) - #334
CAHOZA Lead wire 18Ga (section 0,82 mm²), red, 1,5 m (5 ft) - #334
18 gauge wire, bare copper conductor, red silicon insulation, 408 strands, 5 feet
-
PROSLOT Lead wire 18Ga (0,82 mm²) with soldered copper clip on both ends, pink - #PS-619
PROSLOT Lead wire 18Ga (0,82 mm²) with soldered copper clip on both ends, pink - #PS-619
9 Lead Wire with Clips 18 AWG w/441 Ultra fine strands
-
PRO SLOT LEAD WIRE 18Ga (0,82 mm²) with soldered copper clip on both ends, pink, 40 cm - #PSL620
DRAGSTER LEAD WIRE WITH CLIPS - 40 cm long with nickel plated guide clips
-
JK Lead wire 18Ga (section 0,82 mm²), transparent, 1 m (3 ft) - #U52-3
UberFlex Lead Wire 18 AWG - 444 strand high purity copper silicone jacket 3 ft
-
PRO SLOT LEAD WIRE 18Ga (section 0,82 mm²), pink, 1 m (3 ft) - #PS-621
DRAGSTER LEAD WIRE WITH CLIPS - 3 meters long with nickel plated guide clips
-
PRO SLOT LEAD WIRE 18Ga (section 0,82 mm²), pink, 3 m (10 ft) - #PS-622
DRAGSTER LEAD WIRE WITH CLIPS - 3 meters long with nickel plated guide clips
-
WRIGHTWAY LEAD WIRE 18Ga (0,82 mm²), 2.4 m (8 ft), SUPER LIGHT - #WWML
WWML - 18 gauge, thinner insulation, super light silicone insulation. 402 strands seems to center the guide after wrecks better then what's available now. 8 foot lengths.
-
KOFORD Lead wire 18Ga (0,82 mm²), super ultra flex silcone, 9 m. (30 ft.) - #М667
KOFORD Lead wire 18Ga (0,82 mm²), super ultra flex silcone, 9 m. (30 ft.) - #М667
Lightweight ultraflex 413 strand 18 guage lead wire with superthin wall insulation. Reduced insulation wall thickness results a 14% weight savings over competitors lead wire. Worlds and Nat's winner.
-
TURNIGY Lead wire 16Ga (section 1,31 mm²), blue, 1 m (3 ft.), insulation diameter .12" (3,04 mm)
TURNIGY Lead wire 16Ga (section 1,31 mm²), blue, 1 m (3 ft.), insulation diameter .12" (3,04 mm)
-
TURNIGY Lead wire 16Ga (section 1,31 mm²), black, 1 m (3 ft.), insulation diameter .12" (3,08 mm)
TURNIGY Lead wire 16Ga (section 1,31 mm²), black, 1 m (3 ft.), insulation diameter .12" (3,08 mm)
-
TURNIGY Lead wire 16Ga (section 1,31 mm²), red, 1 m (3 ft.), insulation diameter .12" (3,04 mm)
TURNIGY Lead wire 16Ga (section 1,31 mm²), red, 1 m (3 ft.), insulation diameter .12" (3,04 mm)
-
TQ LEAD WIRE 16Ga (section 1,31 mm²), orange 1 m (3 ft) - #TQ1630
3 feet (1 m) orange - TQ 16 Gauge wire is constructed with 665 strands of bare copper and thin wall silicone insulation. This wire is only 2.4mm OD, extremely flexible, and absolutely will not tweak 12th and 10th scale pan cars, even with brushless systems that require 3 wires to the motor.
-
TQ LEAD WIRE 16Ga (section 1,31 mm²), black 1 m (3 ft) - #TQ1631
3 feet (1 m) black - TQ 16 Gauge wire is constructed with 665 strands of bare copper and thin wall silicone insulation. This wire is only 2.4mm OD, extremely flexible, and absolutely will not tweak 12th and 10th scale pan cars, even with brushless systems that require 3 wires to the motor.
-
TQ LEAD WIRE 16Ga (section 1,31 mm²), blue 1 m (3 ft) - #TQ1632
3 feet (1 m) blue - TQ 16 Gauge wire is constructed with 665 strands of bare copper and thin wall silicone insulation. This wire is only 2.4mm OD, extremely flexible, and absolutely will not tweak 12th and 10th scale pan cars, even with brushless systems that require 3 wires to the motor.
-
TQ LEAD WIRE 16Ga (section 1,31 mm²), red 1 m (3 ft) - #TQ1634
Very soft lead wire, perhaps, it can use in some wing classes or in drag-racing.
Good choise for power supply unit or controllers!
-
TQ LEAD WIRE 16Ga (section 1,31 mm²), yellow 1 m (3 ft) - #TQ1636
3 feet (1 m) yellow - TQ 16 Gauge wire is constructed with 665 strands of bare copper and thin wall silicone insulation. This wire is only 2.4mm OD, extremely flexible, and absolutely will not tweak 12th and 10th scale pan cars, even with brushless systems that require 3 wires to the motor.
-
TQ Lead wire 16Ga (section 1,31 mm²), orange 1.5 m (5 ft) - #TQ950
TQ Lead wire 16Ga (section 1,31 mm²), orange 1.5 m (5 ft) - #TQ950
Orange drag lead wire 5 foot lengths. 16 gauge, 665 strand bare copper conductor. Thin wall silicone insulation for light weight. Designed to deliver higher performance for drag cars.
-
S&K Power supply leads 16Ga (section 1,31 mm²), "banana" clips from one side/ "alligator" clips from other, 0,8 m - #0109
S&K Power supply leads 16Ga (section 1,31 mm²) w/clips, 0,8 m - #0109
16 gauge wire with small 4 mm banana plugs and alligator clips, 0,8 m long - same as that comes with their power supply.
-
TURNIGY Lead wire 14Ga (section 2,08 mm²), black, 1 m (3 ft.), insulation diameter .136" (3,46 mm)
TURNIGY Lead wire 14Ga (section 2,08 mm²), black, 1 m (3 ft.), insulation diameter .136" (3,46 mm)
-
TURNIGY Lead wire 14Ga (section 2,08 mm²), red, 1 m (3 ft.), insulation diameter .136" (3,46 mm)
TURNIGY Lead wire 14Ga (section 2,08 mm²), red, 1 m (3 ft.), insulation diameter .136" (3,46 mm)
-
TURNIGY Lead wire 14Ga (section 2,08 mm²), orange, 1 m (3 ft.), insulation diameter .139" (3,54 mm)
TURNIGY Lead wire 14Ga (section 2,08 mm²), orange, 1 m (3 ft.), insulation diameter .139" (3,54 mm)
-
TURNIGY Lead wire 12Ga (section 3,31 mm²), transparent, 1 m (3 ft.), insulation diameter .166" (4,21 mm)
TURNIGY Lead wire 12Ga (section 3,31 mm²), transparent, 1 m (3 ft.), insulation diameter .166" (4,21 mm)
-
TURNIGY Lead wire 12Ga (section 3,31 mm²), black, 1 m (3 ft.), insulation diameter .165" (4,19 mm)
TURNIGY Lead wire 12Ga (section 3,31 mm²), black, 1 m (3 ft.), insulation diameter .165" (4,19 mm)