Group-12 Motors & Parts
-
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 38 DEG - #468-BOX-38
Tri-Star G12 arm .518 diameter 38° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability
-
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 42 DEG - #468-BOX-42
Tri-Star G12 arm .518 diameter 42° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability
-
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 45 DEG - #468-BOX-45
Tri-Star G12 arm .518 diameter 45° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability
-
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 46 DEG - #468-BOX-46
Tri-Star G12 arm .518 diameter 46° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability
-
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 47 DEG - #468-BOX-47
Tri-Star G12 arm .518 diameter 47° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability
-
MID-AMERICA DIAMOND HEAD SET UP KIT W/ BUSHINGS & MAGNETS - #MAR630
Diamond Head C can set up Kit w/ Bushings C Can Set Up Very High Quality Set up kit with Magnets and brush springs
-
TWP C-Can setup - #TWPKMB-012
TWP C-Can setup - #TWPKMB-012
Full setup kit for G12 (C-Can group) motor.
-
PROSLOT X-12 C-CAN MOTOR W/38 DEGREE ARMATURE- #PS-723 38
Group 12 motor 38 degree, with VIP Can, Mega III Magnets, and on the M Blank
-
PROSLOT X-12 C-CAN MOTOR W/45 DEGREE ARMATURE- #PS-723-45
Group 12 motor 45 degree, with VIP Can, Mega III Magnets, and on the M Blank
-
PROSLOT X-12 C-CAN MOTOR W/42 DEGREE ARMATURE- #PS-723-42
Group 12 motor 42 degree, with VIP Can, Mega III Magnets, and on the M Blank
-
KOFORD Tri-Star dia. .518" Handwound X-12 ARM 48 deg. - #M468-H12
KOFORD Tri-Star dia. .518" Handwound X-12 ARM 48 deg. - #M468-H12
Hand wound on the Koford Tri Star blank for the ultimate in performance. Features reduced winding resistance and weight. Super hard shaft for long armature life.
-
KOFORD Tri-Star dia. .518" Handwound X-12 ARM 45 deg. - #M468-H12
KOFORD Tri-Star dia. .518" Handwound X-12 ARM 45 deg. - #M468-H12
Hand wound on the Koford Tri Star blank for the ultimate in performance. Features reduced winding resistance and weight. Super hard shaft for long armature life.
-
CAHOZA Assembled endbell for G12 C-Cans - #146
CAHOZA Assembled endbell for G12 C-Cans
New aluminium hard anodised assembled endbell for all Cahoza C-cans (G12), gold plated horizontal hardware (#171), 3coil aluminium spring posts, includes stainless steel ball bearing, diameter for cans is 21,25mm (.837"), this endbell is made from very hard aluminium, perfectly dissipates heat away from brushes
-
CAHOZA Assembled endbell for G12 C-Cans +4° rotation - #146-H4
CAHOZA Assembled endbell for G12 C-Cans +4° rotation
New aluminium hard anodised assembled endbell for all Cahoza C-cans (G12), gold plated horizontal hardware (#171) turned to +4°, 3coil aluminium spring posts, includes stainless steel ball bearing, diameter for cans is 21,25mm (.837"), this endbell is made from very hard aluminium, perfectly dissipates heat away from brushes
-
CAHOZA С-Can G12 motor - O - #230
Cahoza C-can motor, assembled using:
- "O" type C-can #250,
- Cahoza Tornado 2 magnets,
- Cahoza plastic endbell,
- Cahoza hardware #266,
- Cahoza aluminium spring cups,
- Cahoza tapping screws,
- Koford flanged oilites,
- Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator,
- Koford brushes M486,
- Cahoza springs #257,
- magnets are glued in using Cahoza single component epoxy,
- inside diameter of magnets is 13,45mm (.529"),
- weight of complete motor is only 19,2 grammes.
-
VALIKO Armature Х-12 48º, 0.515" diam. (ISRA 2019 in UK oficial armature)
Avialable for pre-order on end of December and first half of Janure
-
VALIKO Х-12 CUSTOM armature, 0.510 - 0.518 diam. Any degree and long.
Avialable for special order
-
VALIKO Armature Х-12 45º, 0.515" diam.
VALIKO Armature Х-12 45º, 0.515" diam.
-
CAHOZA C-Can G12 motor - U - #231
Cahoza C-can motor, assembled using:
- "U" type C-can #251,
- Cahoza Tornado 2 magnets,
- Cahoza plastic endbell,
- Cahoza hardware #266,
- Cahoza aluminium spring cups,
- Cahoza tapping screws,
- Koford flanged oilites,
- Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator,
- Koford brushes M486,
- Cahoza springs #257,
- magnets are glued in using Cahoza single component epoxy,
- inside diameter of magnets is 13,45mm (.529"),
- weight of complete motor is only 19,1 grammes.
-
CAHOZA C-Can G12 motor - O - bevelled - #230B
Cahoza C-can motor, assembled using:
- "O" type C-can #250,
- Cahoza Tornado 2 bevelled magnets #276,
- Cahoza plastic endbell,
- Cahoza hardware #266,
- Cahoza aluminium spring cups,
- Cahoza tapping screws,
- Koford flanged oilites,
- Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator,
- Koford brushes M486,
- Cahoza springs #257,
- magnets are glued in using Cahoza single component epoxy,
- inside diameter of magnets is 13,45mm (.529"),
- weight of complete motor is only 18,2 grammes.
-
KOFORD Ultra G12 blueprinted motor with shunts and can ball bearing - #M527B
KOFORD Ultra G12 blueprinted motor with shunts and can ball bearing - #M527B
Lightweight can and .450 long magnets. Motor is blueprinted and assembled by Koford craftsmen with premium brushes and fully broken in.
-
CAHOZA C-Can G12 motor - U - bevelled - #231B
Cahoza C-can motor, assembled using:
- "U" type C-can #251,
- Cahoza Tornado 2 bevelled magnets #276,
- Cahoza plastic endbell,
- Cahoza hardware #266,
- Cahoza aluminium spring cups,
- Cahoza tapping screws,
- Koford flanged oilites,
- Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator,
- Koford brushes M486,
- Cahoza springs #257,
- magnets are glued in using Cahoza single component epoxy,
- inside diameter of magnets is 13,45mm (.529"),
- weight of complete motor is only 18,1 grammes.
-
CAHOZA C-Can G12 motor - UL - #232
Cahoza C-can motor, assembled using:
- "UL" type C-can #252,
- Cahoza Tornado 2 magnets,
- Cahoza plastic endbell,
- Cahoza hardware #266,
- Cahoza aluminium spring cups,
- Cahoza tapping screws,
- Koford flanged oilites,
- Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator,
- Koford brushes M486,
- Cahoza springs #257,
- magnets are glued in using Cahoza single component epoxy,
- inside diameter of magnets is 13,45mm (.529"),
- weight of complete motor is only 19 grammes.
-
CAHOZA G12 C-Can setup type UL - bevelled - #242-ULB
Cahoza C-can setup, assembled using:
- Cahoza C-can #252,
- Cahoza Tornado 5 bevelled magnets,
- Cahoza endbell #262,
- Cahoza spring cups,
- 2x5 precisely turned oilite in endbell, ball bearing in can,
- Cahoza screws,
- for .518" armatures, Koford ones are recommended,
- professionaly assembled,
- weight 10.8 grammes