Group-12 Motors & Parts
-
PROSLOT SMQ (SINGLE MAGNET QUADS) MATCHED MAGNETS FOR C-CANS, pair - #PS906
SMQ (Single Magnet Quads) Matched Magnets for Proslot motors group 12.
-
PROSLOT SpeedFX X12 REPLACEMENT BALANCED ARMATURE - #PS3006
FX X12 Replacement Balanced Armature (commutator trued)
-
PROSLOT C-Can assembled endbell (w/copper hardware) - #PS618
PROSLOT C-Can assembled endbell w/copper hardware aligned and honed - undrilled - #PS618
-
CAHOZA TAPPING SCREWS, for T5 driver, 24 pc. - #273
Cahoza profi tapping screws, thread diameter is 1,52mm (.0598"), length thread is 4 mm (.157"), bolt head high is 1,2mm (.047"), for T5 driver or imbus Tip .051", screws are black coated,
-
CAHOZA PROF GOLD PLATED BRUSH HOODS, set - #268
NEW PROFESSIONAL ALUMINIUM GOLD PLATED BRUSH HOODS
total new professional hardware (brush hoods) with heatsinks, made from hard aluminium plate with thickness of 0.4mm (.0157"), gold plated, hand work, most precise -
B52 C-Can Combo magnets 0.167" thick, 0.458" long, type 1 (one side is flat one side is bevelled), pair
B52 C-Can magnets, type 1, pair
-
B52 C-Can Flat magnets 0.167" thick, 0.458" long, type 2 (both side is flat), pair
B52 C-Can magnets, type 2, pair
-
B52 C-Can Bevelled magnets 0.167" thick, 0.458" long, type 3 (both side is bevelled), pair
B52 C-Can magnets, type 3, pair
-
PROSLOT X-12 SRC C-CAN SETUP KIT W/OUT MAGNETS - #PS-749SRS
X-12 SRC C-CAN SETUP KIT W/OUT MAGNETS
-
PROSLOT VIP C-CAN SETUP KIT W/O MAGNETS - #PS-749VIP
C-can Setup kit (without magnets). Prepared set of C-CAN X-12, w/out magnets. The can looks like the photo.
-
CAHOZA TORNADO 5 (C-CANS) BEVELLED MAGNETS, pair - #278
NEW CAHOZA TORNADO 5 BEVELLED MAGNETS
the same as #277 magnets, but feature 16-degree cut, weight 5,96 grammes, these magnets are legal for USRA and ISRA -
PROSLOT MEGA III MATCHED MAGNETS FOR C-CANS (X-12), pair - #PS912
MEGA III Matched Blue Dot Magnets - same as our PS-908 only .450 long
Selected tool magnets for C-cans (group 12 motors)
-
KOFORD Ultrastrong radial C-Can drag magnets- #M592
KOFORD Ultrastrong radial C-Can drag magnets
Ultrastrong radial drag magnets, when used with M593 treated can produces 4% more flux then competitors wide can and .170 thick quad magnets without the problems of nonstandard size cans. .165 thick x .520 long
-
PROSLOT SPEEDFX X12 BALANCED MOTOR, W/CHEAP BALANCED ARMATURE- #PS3000
Speed FX Group 12 Motor SRS C-Can - Black Endbell
Great option for the beggining racers in Production 1/24. When the work time of cheap armature came out, you can set in this can more expensive armature.
-
CAHOZA C CAN TYPE "UL" - #252
C-CAN TYPE UL
Cahoza C-can, produced from 0,4mm (.0157") thick hardmetal plate -
CAHOZA Aluminium nickel plated brush hoods, 1 bag (6 pairs) - #266
CAHOZA Aluminium nickel plated brush hoods, 1 bag (6 pairs) - #266
hardware (brush hoods), made from hard aluminium plate with thickness of 0.4mm (.0157"), nickel plated, hand work, most precise, no more grinding or drilling
-
CAHOZA Single endbell for C-Cans (G-12) - #126
CAHOZA Single endbell for C-Cans (G-12)
Aluminium hard anodised single endbell for G12 Cahoza C-cans, lightened, pattern hole drilled for hardware #170 and #171
-
PROSLOT X-12 ARM DIA .513", 38 DEGREE - #PS-701-38
Box Stock X12 .513 38 degrees on M Blank
-
PROSLOT X-12 ARM DIA .513", 42 DEGREE - #PS-701-42
You can order any degree of advance.
Box Stock X12 .513 42 degrees on M Blank
-
KOFORD Neo top gun C-Can drag magnets - #M596
KOFORD Neo top gun C-Can drag magnets - #M596
-
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 40 DEG - #468-BOX-40
Tri-Star G12 arm .518 diameter 40° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability
-
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 44 DEG - #468-BOX-44
Tri-Star G12 arm .518 diameter 44° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability
-
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 48 DEG - #468-BOX-48
Tri-Star G12 arm .518 diameter 48° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability
-
S&K Х-12 CUSTOM armature, 0.510 - 0.518 diam. Any degree. - #SKAX12-CUSTOM
S&K Х-12 CUSTOM armature, 0.510 - 0.518 diam. Any degree.
Avialable for special order