Gears
-
VITULA 80 PITCH 43T, 0° angle, 3/32" axle, Ø14.45 mm glued on 3/32" axle ProSlot - ZHB#211
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109
-
VITULA Gear 72 PITCH, 37T, 0° angle, 3/32" axle, Ø14.8 mm - #SG770
VITULA Gear 72 PITCH, 37T, 0° angle, 3/32" axle, Ø14.8 mm - #SG770
-
VITULA Gear 72 PITCH, 39T, 0° angle, 3/32" axle, Ø14.8 mm - #SG790
VITULA Gear 72 PITCH, 39T, 0° angle, 3/32" axle, Ø14.8 mm - #SG790
-
VITULA Gear 72 pitch, 39T, 0° angle, 3/32" axle, Ø14.8 mm, for gluing - #SG790g
VITULA Gear 72 pitch, 39T, 0° angle, 3/32" axle, Ø14.8 mm, for gluing - #SG790g
-
VITULA GEAR 80 PITCH, 43T, 0° angle, 3/32" axle, Ø14,45 mm, for gluing - #003P
VITULA GEAR 80 PITCH, 43T, 0° angle, 3/32" axle, Ø14,45 mm, for gluing - #003P
-
VITULA PINION 64 PITCH, 6T , 0° ANGLE, EDM, 2 mm bore - #P6620
VITULA PINION 64 PITCH, 6T , 0° ANGLE, EDM, 2 mm bore - #P6620
Pinions are EDM made from hardened tool steel. The shapes of the tooth were computer designed for low friction and the best run. Round running of the pinions is to the limit of 0.01 mm.
-
VITULA Pinion 72 PITCH, 5T, EDM, 0° angle, 1.5 mm bore - #7515
VITULA Pinion 72 PITCH, 5T, EDM, 0° angle, 1.5 mm bore - #7515
-
YRE Pinion 80 pitch 6 teeth, 0° angle 1.5 mm bore, EDM
YRE Pinion 80 pitch 6 teeth, 0° angle 1.5 mm bore, EDM
Manufactured on the Japan EDM machine AMADA. High quality swiss steel.
-
YRE Pinion 80 pitch 7 teeth, 0° angle 1.5 mm bore, EDM
YRE Pinion 80 pitch 7 teeth, 0° angle 1.5 mm bore, EDM
Manufactured on the Japan EDM machine AMADA. High quality swiss steel.
-
ZHB GEAR HORKY 80 PITCH 45T, 0° angle, 3/32" axle, Ø14.9 mm glued on 3/32" axle ProSlot - ZHB#218
The hub is machined to a diameter 3.5 mm
You can order gluing any gear on any axle. Price for gluing & machining - $2.5 (ZHB#109)
-
ZHB GEAR JK 80 PITCH, 45T, 0° angle, 2mm axle, Ø14.9 mm glued on 2 mm axle KOFORD - ZHB#209
The hub is not cut width, but machined to a diameter 3 mm.
This gear for ES32 if you use offset rims in gears side or for ES24.
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
ZHB GLUING SERVICE GEARS ON AXIE & MACHINING HUBS - #109
More & more sportsmen use gears glued on axle. It's connected with decrease imbalance, caused clamping of the screw and possibility use rims without offset of the hub in ES-32
Just let us know what gears and axle you need - and we will be work for you!