Gears
-
DUBICK Pinion gear 48 pitch, 7T, 2 mm bore, brass (This is solder style pinion gear) - #DB501-7
48 pitch Straight stainless steel 7 tooth pinion gears
IN STOCK!
-
DUBICK PINION GEAR 48 PITCH, 8T, 2 mm bore, BRASS (This is press-on style pinion gear) - #DB501-8
DUBICK PINION GEAR 48 PITCH, 8T, 2 mm bore, BRASS
This is press-on style pinion gear
-
DUBICK PINION GEAR 48 PITCH, 9T, 2 mm bore, BRASS (This is press-on style pinion gear) - #DB501-9
DUBICK PINION GEAR 48 PITCH, 9T, 2 mm bore, BRASS
This is press-on style pinion gear
-
HORKY BIG HUB 80 PITCH 43T, 0° angle, 3/32" axle, Ø14.35 mm glued on 3/32" axle ProSlot - ZHB#213
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
HORKY BIG HUB 80 PITCH, 45T, 0° angle, 3/32" axle, Ø14.9 mm glued on 3/32" axle ProSlot - ZHB#219
The hub is machined to a diameter 3.5 mm
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
HORKY Crown gear 64-72 pitch 30 teeth, 2 mm axle, Ø13.05 mm, green - HOR#F1-2 mm
This gear used in Formula 1/32
Producer declared 64 pitch, but traditionally we use pinions 72 pitch with this gears
At the same time, how I know, pinions 64 pitch also can work with this gears
-
HORKY CROWN GEAR 64-72 pitch, 30 teeth, 3/32" axle, Ø13.05 mm, green - #F1-32
CROWN GEAR 64-72 pitch, 30 teeth, 3/32" axle, Ø13.05 mm, green - #F1-32
Manufacturer says, that this is 64 pitch, but we (traditionally:)) use it with 72 pitch pinions.
At the same time, how I know, 64 pitch pinions could also work with this gears.
-
HORKY Gear 72 pitch 40 teeth, 0° angle, 2 mm axle, Ø14.66 mm
HORKY Gear 72 pitch 40 teeth, 0° angle, 2 mm axle, Ø14.66 mm
-
HORKY Gear 72 pitch 40 teeth, 0° angle, 3/32" axle, Ø14.66 mm
HORKY Gear 72 pitch 40 teeth, 0° angle, 3/32" axle, Ø14.66 mm
-
HORKY GEAR 80 PITCH, 44T, 0° angle, 2mm axle, Ø14.5 mm- #44-2mm
HORKY GEAR 80 PITCH, 44T, 0° angle, 2mm axle, Ø14.5 мм - #44-2mm
-
HORKY GEAR 80 PITCH, 44T, 0° angle, 2mm axle BIG HUB, Ø14.5 mm - #BH44-2mm
HORKY GEAR 80 PITCH, 44T, 0° angle, 2mm axle BIG HUB, Ø14.5 мм - #BH44-2mm
-
HORKY PINION 64 PITCH, 6T , 0° ANGLE, EDM, 2 mm bore - #H64P-6-2
HORKY PINION 64PITCH, 6T , 0° ANGLE, EDM, 2 mm bore - #H64P-6-2
-
HORKY PINION 72 PITCH, 5T, EDM, 0° angle, 1.5 mm bore - #H72P-5-1.5
HORKY PINION 72 PITCH, 5T, EDM, 0° angle, 1.5 mm bore - #H72P-5-1.5
-
HORKY PINION 72 PITCH, 6T, EDM, 0° angle, 1.5 mm bore (FOR F1/32)
HORKY PINION 72 PITCH, 6T, EDM, 0° angle, 1.5 mm bore (FOR F1/32)
-
HORKY PINION 72 PITCH, 7T, 0° angle, EDM, 2 mm bore
HORKY PINION 72 PITCH, 7T, 0° angle, EDM, 2 mm bore
-
HORKY PINION 80 PITCH, 6T, 1.5 mm bore, EDM
HORKY PINION 80 pitch 6 teeth, EDM, shaft 1.5 mm
Electrical discharge machining (EDM)
-
JK 72 PITCH, 40T, 0° angle, 2 mm axle, Ø14.65 mm, glued on 2 mm axle KOFORD - ZHB#232
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
JK 80 PITCH 43T, 0° angle, 3/32" axle, Ø14.28 mm glued on 3/32" axle ProSlot - ZHB#212
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109
-
JK 80 PITCH 44T, 0° angle, 2mm axle, Ø14.6 mm glued on 2 mm axle KOFORD - ZHB#205
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
JK 80 PITCH 44T, 0° angle, 3/32" axle, Ø14.6mm glued on 3/32" axle ProSlot - ZHB#215
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
JK 80 PITCH 45T, 0° angle, 3/32" axle, Ø14.9 mm glued on 3/32" axle ProSlot - ZHB#217
The hub is machined to a diameter 3.5 mm
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
JK Gear 48 pitch, 26T, 1/8" axle with hub adaptor to 3/32", Ø14.76 mm, w/screw - #G426
JK Gear 48 pitch, 26T, 1/8" axle with hub adaptor to 3/32", Ø14.76 mm, w/screw - #G426
Old catalog #JK4126
-
JK Gear 48 pitch, 26T, 1/8" axle, Ø14.76 mm, w/screw - #G426
JK Gear 48 pitch, 26T, 1/8" axle, Ø14.76 mm, w/screw - #G426
Old catalog #JK4126
-
JK GEAR 48 PITCH, 27T, 1/8" axle with hub adaptor 3/32", Ø15.2 mm, w/screw - #G427
JK GEAR 48 PITCH, 27T, 1/8" axle with hub adaptor 3/32", Ø15.2 mm, w/screw - #G427
Old catalog #JK4127