Falcon, Hawk & Johnson Motors
-
MID AMERICA Phoenix motor double ball bearing - #MID602BB
MID AMERICA Phoenix motor double ball bearing
Phoenix Motor w/ Ball Bearings Details: Do not break in on a power supply
-
CAHOZA Motor 12V - 40,000 rpm - #282
CAHOZA Motor 12V - 40,000 rpm - #282
new short can motor 12V-40,000 rpm, 320 g/cm. Armature is axially aligned to the magnetic field for the best performance and axial play between oilites is from .004" to .008". Shaft dia is 2mm.
-
TWP 70KBB Motor - #TWP70KBB
TWP 70KBB Motor - #TWP70KBB
-
DUBICK Panda 55,000 rpm 12V motor - #DB750
DUBICK Panda 55,000 rpm 12V motor - #DB750
Fast and reliable FK group motor.
55 turns 28 AWG wire
Carbon brushes. Short armature shaft.
-
PROSLOT Euro MK1 Motor - 26.000+ rpm - #PS-4000
PROSLOT Euro MK1 Motor - 26.000+ rpm
155/gm-cm, 280mA, standard with 45 degree springs. Designed for 1/32 and 1/24 ScaleHome, Club and Commercial Racing. CW or CCW rotation
-
PROSLOT Euro MK1 Motor - 37.000+ rpm - #PS-4001
PROSLOT Euro MK1 Motor - 37.000+ rpm
160/gm-cm, 300mA, standard with 60 degree springs. Designed for 1/32 and 1/24 Scale - Home, Club and Commercial Racing. CW or CCW rotation
-
PROSLOT Euro MK1 Motor - 47.000+ rpm - #PS-4002
PROSLOT Euro MK1 Motor - 47.000+ rpm
160/gm-cm, 950mA, standard with 90 degree springs. Designed for 1/32 and 1/24 Scale - Home, Club and Commercial Racing
-
PROSLOT Euro MK1 Motor blue printed sealed with american made armature - #PS-4002B
PROSLOT Euro MK1 motor blue printed sealed
Euro MK 1 Motor - with American made PD (Puppy Dog) armature as used in retro can am racing
-
PROSLOT Euro MK 1 Motor with American made X12 armature 40* - #PS-4002-12
Euro MK 1 Motor with American made X12 armature 40* CW Rotation
-
PROSLOT BRUSH HOOD/ HEAT SINK SET FOR PROSLOT MOTOR (X-12 GROUP), W/OUT SPRING CUPS & SCREWS- #PS641
Brush Hood & Heat Sink set
-
PROSLOT Velociraptor VR 12 “NEO” motor - #PS-4019
PROSLOT Velociraptor VR 12 “NEO” motor
This motor uses the new PS-4017 “Neo” Euro MK1 setup with a specially made .500 diameter VR12 machine wound armature on our race proven Intruder blank and includes G7 brushes. This motor was built for the new wave of “NEO” F/C racing. Our testing using an 85 gram hardbody test car netted .720 ET’s @ 70+ MPH. Recommended starting gear ratio 14/52.
-
PROSLOT Velociraptor VR eXtreme “NEO motor - #PS-4021
PROSLOT Velociraptor VR eXtreme “NEO motor
This motor uses the new PS-4017 “NEO” Euro MK1 setup with a specially made .500 diameter VR eXtreme machine wound armature on our race proven Intruder blank and includes G7 brushes. This motor was built for the “Ultimate” bracket racer and “Outlaw NEO” class racer. Our testing using an 85 gram hardbody test car netted .590 ET’s @ 90+ MPH. This motor has no equal in performance for the money. Recommended starting gear ratio 14/54
-
PROSLOT Velociraptor VR Open “NEO” motor - #PS-4025
PROSLOT Velociraptor VR Open “NEO” motor
This motor uses the new PS-4017 “NEO” Euro MK1 setup with a specially made .500 diameter custom hand wound all-out Topgun style armature featuring our EDM commutator, wound on our race proven Intruder blank and our copper hardware on the endbell. Standard wind 18/24.5 and double ball bearings. Also available in 25/25, 15/24, 14/24
-
JK Set-up For JK#M3 HAWK w/Ceramic Magnets - #M3S
JK Set-up For JK#M3 HAWK w/Ceramic Magnets - #M3S
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
Old catalog #JK30301
-
-
JK REPLACEMENT ENDBELL FOR HAWK #M3 (#M6), ALUMINIUM - #M3EA (#M6EA)
JK REPLACEMENT ENDBELL FOR HAWK #M3 (#M6), ALUMINIUM - #M3EA (#M6EA)
New improved - Upgraded Aluminum endbell for JK Hawk #M3 motors
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
Old catalog #JK30303AL
-
JK NEODYMIUM MAGNETS FOR HAWK MOTOR - #M3M (#M6M)
JK NEODYMIUM MAGNETS FOR HAWK MOTOR - #M3M (#M6M)
NEODYMIUM REPLACEMENT MAGNETS FOR HAWK 3030 MOTOR (more powerful than stock)
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
-
JK Armature for HAWK #M3 motor - #M3A
JK Armature for HAWK #M3 motor - #M3A
Basic HAWK motor armature. It can be used in Proslot EURO MK motors
Old catalog #JK30302
-
PROSLOT HAWK REPLACEMENT ARMATURE W/MARKED "HK" - #4016
HAWK REPLACEMENT ARMATURE W/MARKED RUS
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
-
KOFORD REPLACEMENT ARMATURE FOR JK HAWK - #M644
Koford replacement arm for JK Hawk. Plated better then drill blank shaft, 800° epoxy. Requires JK replacement endbell for Koford arms.
-
PROSLOT HAWK REPLACEMENT ARMATURE W/MARKED "RUS" - #4016
HAWK REPLACEMENT ARMATURE W/MARKED RUS
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
-
KOFORD G12 Armature for Hawk6 Neo Magnet Setup Only 40 Degrees - #M645-12-40
G12 arm to fit JK Hawk 6 bonded neo magnet set up. Better then drill blank shaft, 800° epoxy. 40° timing. recommended for neo magnet set ups only.
-
TQ 16D CAN SCREWS, SELF-TAPPING, FOR ALLEN KEY, 1 pc. - #TQ16
These are custom made of heat treated steel with .050” button heads so your gear wrench will work. The 1/8” self tapping, oversized threads will fix factory stripped endbells. If you race 16D’s, these are the only screws to use. Now chrome plated for corrosion resistance and appearance.
-
TQ 16D CAN SCREWS, SELF-TAPPING, FOR ALLEN KEY, 4 pc. - #TQ16
These are custom made of heat treated steel with .050” button heads so your gear wrench will work. The 1/8” self tapping, oversized threads will fix factory stripped endbells. If you race 16D’s, these are the only screws to use. Now chrome plated for corrosion resistance and appearance.