Falcon, Hawk & Johnson Motors
-
TQ 16D CAN SCREWS, SELF-TAPPING, FOR ALLEN KEY, 1 pc. - #TQ16
These are custom made of heat treated steel with .050” button heads so your gear wrench will work. The 1/8” self tapping, oversized threads will fix factory stripped endbells. If you race 16D’s, these are the only screws to use. Now chrome plated for corrosion resistance and appearance.
-
TQ 16D CAN SCREWS, SELF-TAPPING, FOR ALLEN KEY, 4 pc. - #TQ16
These are custom made of heat treated steel with .050” button heads so your gear wrench will work. The 1/8” self tapping, oversized threads will fix factory stripped endbells. If you race 16D’s, these are the only screws to use. Now chrome plated for corrosion resistance and appearance.
-
JK Armature for HAWK #M3 motor - #M3A
JK Armature for HAWK #M3 motor - #M3A
Basic HAWK motor armature. It can be used in Proslot EURO MK motors
Old catalog #JK30302
-
JK NEODYMIUM MAGNETS FOR HAWK MOTOR - #M3M (#M6M)
JK NEODYMIUM MAGNETS FOR HAWK MOTOR - #M3M (#M6M)
NEODYMIUM REPLACEMENT MAGNETS FOR HAWK 3030 MOTOR (more powerful than stock)
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
-
B52 50,000rpm Mini Motor - #B52-50
B52 50,000rpm Mini Motor
Ball bearing at both ends, 50,000 rpm, super dynamic balance, best in the business bar none, close performance between motors
-
JK Hawk Retro Motor *** COMPUTER BALANCED *** - #M8
JK Hawk Retro Motor *** COMPUTER BALANCED *** - #M8
JK Hawk Retro Motor, copper brush tab for better conductivity, Same wind and performance as Falcon 7
Old catalog #JKHR
-
MID AMERICA Eagle retro motor - #MID606
MID AMERICA Eagle retro motor - #MID606
-
DUBICK Panda 55,000 rpm 12V motor - #DB750
DUBICK Panda 55,000 rpm 12V motor - #DB750
Fast and reliable FK group motor.
55 turns 28 AWG wire
Carbon brushes. Short armature shaft.
-
H&R Jack Rabbit motor 14,000 rpm - #MJR1
H&R Jack Rabbit motor 14,000 rpm - #MJR1
Mabuchi Replacement Type - Double ended Plain 2mm shaft
-
H&R Hawk motor I 18,000 rpm @12V- double shaft - #MH1
H&R Hawk motor I 18,000 rpm @12V- double shaft - #MH1
-
PROSLOT BRUSH HOOD/ HEAT SINK SET FOR PROSLOT MOTOR (X-12 GROUP), W/OUT SPRING CUPS & SCREWS- #PS641
Brush Hood & Heat Sink set
-
MID AMERICA Eagle motor - #MID605
MID AMERICA Eagle motor
-
JK Set-up For JK#M3 HAWK w/Ceramic Magnets - #M3S
JK Set-up For JK#M3 HAWK w/Ceramic Magnets - #M3S
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
Old catalog #JK30301
-
JK Hawk 7 Motor *** COMPUTER BALANCED *** 48,000 RPM - #M7
JK Hawk 7 Motor *** COMPUTER BALANCED *** 48,000 RPM - #M7
Old catalog #JK30307
-
JK Hawk 25 Motor (25,000RPM) *** BALANCED *** (analogue of FALCON 4) - #M25
JKP Hawk 25 Motor (25,000RPM) *** BALANCED *** (analogue of FALCON 4) - #M25
A close analogue of the motor FALCON 4, which had been removed from manufacturing.
In St. Petersburg it is allowed to use in "Standard" in the "TEAPOT" model class.
Old catalog #JK303025
-
JK Hawk 4 Motor, *** COMPUTER BALANCED *** - #M4
JK Hawk 4 Motor, *** COMPUTER BALANCED *** - #M4
Introducing our newest motor, the Hawk™ MB (yes, a Hawk mini-brute).
We received requests from raceways and racers to make a replacement motor so we did. We tried to match the performance as close to the mini-brute as possible and our pre-release testing showed it to be extremely close
Old catalog #JKHMB
-
JK HAWK MOTOR - #JK3030
HAWK MOTOR. Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
-
RALPH THORNE Raptor PRO FK ball bearing motor 55K - #RTRRAPTOR
RALPH THORNE Raptor PRO FK ball bearing motor 55K - #RTRRAPTOR
RAPTOR PRO FK MOTOR - DOUBLE BALL BEARING. recommended gearing 13/33 road course / 16/54 drag racing . Approx 55k rpm
-
MID AMERICA Mockingbird motor - #MID604
MID AMERICA Mockingbird motor
-
JK Hawk motor, *** Balanced *** w/new optional endbell - #M3
JK Hawk motor, *** Balanced *** w/new optional endbell - #M3
HAWK MOTOR-58000 RPM +,-. The endbell is new for the bigger American made armatures. The armature that comes in the motor is the same specifications as the 3030, but the wires leading to the comm have been tired up for better performance and reliability. This motor replaces the 3030 Hawk motor.
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
Old catalog #JK3031
-
CAHOZA Motor 12V - 40,000 rpm - #282
CAHOZA Motor 12V - 40,000 rpm - #282
new short can motor 12V-40,000 rpm, 320 g/cm. Armature is axially aligned to the magnetic field for the best performance and axial play between oilites is from .004" to .008". Shaft dia is 2mm.
-
JK Direct drive motor for C10 1/32 direct drive chassis - NEW VERSION - #M21
JK Direct drive motor for C10 1/32 direct drive chassis - NEW VERSION - #M21
* NEW VERSION * Direct Drive Motor for C10 1/32 Direct Drive Chassis, *** COMPUTER BALANCED ***
Old catalog #JKH-DD
-
MID AMERICA Phoenix motor - #MID602
MID AMERICA Phoenix motor
A Hawk size motor with group 12 speed.