Chassis & parts
-
DUBICK Precut Brass pin tubes, length 11.8 mm, storage tube (24 pcs.) - #DB409
DUBICK Precut Brass pin tubes, length 11.8 mm, storage tube (24 pcs.) - #DB409
-
KOFORD CUT BRASS PIN TUBE, lenght 12.8 mm, 4 psc. - #M453
Precut brass pin tubes. Use for solid mount EDM chassis for the front mount or use in all chassis for pin tubes.
-
DUBICK Engineering 2023 F1-32 chassis assembled without ballbearings - #DBF1
All chassis starting from 2016 will be made of German high-carbon structural steel 1 mm thick. This is the same material that is used the world's leading chassis manufacturers.
The chassis comes with a front wheels
-
JK Cheetah AEOLOS 4" Production 1/24 chassis, 0.04" thick. - #C26T
JK Cheetah AEOLOS 4" Production 1/24 chassis, 0.04" thick.
0.039" Front 0.047" Rear
Old catalog #C43
-
JK 4" Cheetah 21 chassis kit .035" C-Can - #C21
JK 4" Cheetah 21 chassis kit .035" C-Can - #C21 -
4” Cheetah 21 Stainless Steel Chassis Kit .035” thick with screw in Falcon motor brace
Old catalog #JK25021
-
JK 4" CHEETAH X25 CENTER SECTION 0.9MM - #C25C
JK 4" CHEETAH X25 CENTER SECTION 0.9MM - #C25C
.9mm thick replacement center section for the JKP 4" CHEETAH X25 KIT 0.9MM THICK chassis for PRODUCTION 1/24- #JKPX25
Old catalog #JKX25C
-
JK 4" CHEETAH X25 PAN 0.9MM - #C25P
JK 4" CHEETAH X25 PAN 0.9MM - #C25P
0.9mm replacement pans for 4" X25 chassis JKP 4" CHEETAH X25 KIT 0.9MM THICK chassis for PRODUCTION 1/24- #JKPX25
Old catalog #JKX25P
-
KOFORD CUT BRASS PIN TUBE, lenght 12.8 mm, 24 psc. in box - #M453
Precut brass pin tubes. Use for solid mount EDM chassis for the front mount or use in all chassis for pin tubes.
-
KOFORD STEEL PIN TUBING, lenght 80 mm, 1 pc. - #M259
Precut spring temper stainless steel pin tubing, fits full width of car.
-
JK 4" Cheetah aeolos aluminum pan - #C26PA
JK 4" Cheetah aeolos aluminum pan - #C26PA
Old catalog #C43PA
-
JK J-bar accessory pack for C26 aeolos chassis (0.8mm, 0.9mm. 1.0mm, 1.1mm, 1.2mm, 1.3mm, 1.2mm, 1.3mm - #C26J
JK J-bar accessory pack for C26 aeolos chassis (0.8mm, 0.9mm. 1.0mm, 1.1mm, 1.2mm, 1.3mm, 1.2mm, 1.3mm - #C26J
Part number is JKC26J and the price is $4.95 for a pack of 6 bars: 0.031" = 0.8mm 0.035" = 0.9mm (stock front) 0.039" = 1.0mm 0.043" = 1.1mm.
Old catalog #C43J
-
LUCKY BOB Lead sheet thickness .016" (0,4 mm), with double-stick tape, 1 pc. - #LB1016
LUCKY BOB Lead sheet thickness .016" (0,4 mm), with double-stick tape, 1 pc. - #LB1016
-
LUCKY BOB Lead sheet thickness .016" (0,4 mm), with double-stick tape, 1 pk. (6 pc.) - #LB1016-6
LUCKY BOB Lead sheet thickness .016" (0,4 mm), with double-stick tape, 1 pk. (6 pc.) - #LB1016-6
-
LUCKY BOB Lead sheet thickness .032" (0,8 mm), 38x53 mm with a adhesive tape - #LB1032
LEAD .032" (0,8 mm) THICK, 38x53 mm, WITH DOUBLE STICK TAPE
-
LUCKY BOB Lead sheet thickness .063" (1,6 mm), 2" x 1" (50,8 x 25,4 mm) with a adhesive tape - #LB1063
LUCKY BOB Lead sheet thickness .063" (1,6 mm), 2" x 1" (50,8 x 25,4 mm) with a adhesive tape
-
KOFORD LEAD WIRE RETAINER, 1 pc. - #M324
Lead wire retainer. Prevents lead wire from dragging on track, solders to middle rail.
-
RALPH THORNE Chassis skins JK#C26 (JK#C43), green - #C43-006
RALPH THORNE Chassis skins JK#C26 (JK#C43), green - #C43-006
Green shaded. Made from a special .005" thick high gloss and low friction material. Protects the track and your chassis at the same time. It will also reduce unwanted braid arching which ruins the braids and slows your car down in the process. Each package come with 2 pre-cut peel and stick chassis skins.
-
MOSSETTI PATRIOT CHASSIS CLIP, 1 pc - #MR1051
Retaining Clip (2) – All Chassis
-
HORKY 2016 ES 1/32 Chassis Assembled without ballbearings
It is delivered under the order
Perhaps a slight change in price, depending on the terms of delivery.
-
HORKY 2016 ES 1/24 Chassis Assembled without ballbearings
It is delivered under the order
Perhaps a slight change in price, depending on the terms of delivery.
-
ALPHA Lead sheet thickness 1 mm, 37х25mm, SELFSTICK- #503
Lead sheet thickness 1 mm, 37 х 25 mm can help you to configure your chassis.
Self stick
-
ZHB Lead sheet thickness 0.5 mm, 100 х 100 mm
Lead sheet thickness 0.5 mm, 100 х 100 mm can help you to configure your chassis.
*To fix, you must use glue or double adhesive tape!
-
ZHB Lead sheet thickness 1 mm, 100 х 100 mm
Lead sheet thickness 1 mm, 100 х 100 mm can help you to configure your chassis.
*To fix, you must use glue or double adhesive tape!
-
HORKY 2020 ES 1/24 chassis assembled without ballbearings
HORKY 2020 ES 1/24 chassis assembled without ballbearings