Chassis & parts
-
DUBICK Lead sheet thickness 1 mm, 50 х 50 mm (.039", 1.968" x 1.968") with a 3M selfstick adhesive tape - #210
DUBICK Lead sheet thickness 1 mm, 50 х 50 mm (.039", 1.968" x 1.968") with a 3M selfstick adhesive tape - #210
Lead sheet thickness 1 mm, 50 х 50 mm with a adhesive tape can help you to configure your chassis.
The presence of stick layer eliminates the need for glue application and simplifies the work! -
JK BRASS PIN TUBING, lenght 10.8 mm, 24 psc. in pocket - #U50-12
JK BRASS PIN TUBING, lenght 10.8 mm, 24 psc. in pocket - #U50-12
Old catalog #JK9171
-
ZHB LEAD WIRE RETAINER, 1 pc.
Lead wire retainer. Prevents lead wire from dragging on track, solders to middle rail.
-
DUBICK Precut Brass pin tubes, length 11.8 mm, 4 pcs.- #DB4081
DUBICK Precut Brass pin tubes, length 11.8 mm, 4 pcs.- #DB4081
-
DUBICK Precut Brass pin tubes, length 11.8 mm, storage tube (24 pcs.) - #DB409
DUBICK Precut Brass pin tubes, length 11.8 mm, storage tube (24 pcs.) - #DB409
-
DUBICK Engineering 2024 F1-32 chassis assembled without ballbearings - #DBF1
All chassis starting from 2016 will be made of German high-carbon structural steel 1 mm thick. This is the same material that is used the world's leading chassis manufacturers.
The chassis comes with a front wheels
-
KOFORD CUT BRASS PIN TUBE, lenght 12.8 mm, 4 psc. - #M453
Precut brass pin tubes. Use for solid mount EDM chassis for the front mount or use in all chassis for pin tubes.
-
JK 4" Cheetah Aeolos 1 piece pan - #C26P
JK 4" Cheetah Aeolos 1 piece pan - #C26P
-
JK 4" CHEETAH X25 KIT 0.9MM THICK chassis for PRODUCTION 1/24, ISRA legal - #C25
JK 4" CHEETAH X25 KIT 0.9MM THICK chassis for PRODUCTION 1/24, ISRA legal - #C25
4" Cheetah X25 Stainless Steel Chassis Kit 0.9mm thick. Features: Radial pressing guide plate, holes for either 1/2" or 5/8" fronts, shorter in length than the X24 chassis and slightly thicker in the rear pillar block than the X24.
Old catalog #JKX25
-
JK 4" CHEETAH X25 CENTER SECTION 0.9MM - #C25C
JK 4" CHEETAH X25 CENTER SECTION 0.9MM - #C25C
.9mm thick replacement center section for the JKP 4" CHEETAH X25 KIT 0.9MM THICK chassis for PRODUCTION 1/24- #JKPX25
Old catalog #JKX25C
-
JK 4" CHEETAH X25 PAN 0.9MM - #C25P
JK 4" CHEETAH X25 PAN 0.9MM - #C25P
0.9mm replacement pans for 4" X25 chassis JKP 4" CHEETAH X25 KIT 0.9MM THICK chassis for PRODUCTION 1/24- #JKPX25
Old catalog #JKX25P
-
JK 4" Cheetah aeolos aluminum pan - #C26PA
JK 4" Cheetah aeolos aluminum pan - #C26PA
Old catalog #C43PA
-
KOFORD CUT BRASS PIN TUBE, lenght 12.8 mm, 24 psc. in box - #M453
Precut brass pin tubes. Use for solid mount EDM chassis for the front mount or use in all chassis for pin tubes.
-
KOFORD STEEL PIN TUBING, lenght 80 mm, 1 pc. - #M259
Precut spring temper stainless steel pin tubing, fits full width of car.
-
JK J-bar accessory pack for C26 aeolos chassis (0.8mm, 0.9mm. 1.0mm, 1.1mm, 1.2mm, 1.3mm, 1.2mm, 1.3mm - #C26J
JK J-bar accessory pack for C26 aeolos chassis (0.8mm, 0.9mm. 1.0mm, 1.1mm, 1.2mm, 1.3mm, 1.2mm, 1.3mm - #C26J
Part number is JKC26J and the price is $4.95 for a pack of 6 bars: 0.031" = 0.8mm 0.035" = 0.9mm (stock front) 0.039" = 1.0mm 0.043" = 1.1mm.
Old catalog #C43J
-
RALPH THORNE Chassis skins JK#C26 (JK#C43), green - #C43-006
RALPH THORNE Chassis skins JK#C26 (JK#C43), green - #C43-006
Green shaded. Made from a special .005" thick high gloss and low friction material. Protects the track and your chassis at the same time. It will also reduce unwanted braid arching which ruins the braids and slows your car down in the process. Each package come with 2 pre-cut peel and stick chassis skins.
-
LUCKY BOB Lead sheet thickness .016" (0,4 mm), with double-stick tape, 1 pc. - #LB1016
LUCKY BOB Lead sheet thickness .016" (0,4 mm), with double-stick tape, 1 pc. - #LB1016
-
LUCKY BOB Lead sheet thickness .016" (0,4 mm), with double-stick tape, 1 pk. (6 pc.) - #LB1016-6
LUCKY BOB Lead sheet thickness .016" (0,4 mm), with double-stick tape, 1 pk. (6 pc.) - #LB1016-6
-
LUCKY BOB Lead sheet thickness .032" (0,8 mm), 38x53 mm with a adhesive tape - #LB1032
LEAD .032" (0,8 mm) THICK, 38x53 mm, WITH DOUBLE STICK TAPE
-
LUCKY BOB Lead sheet thickness .063" (1,6 mm), 2" x 1" (50,8 x 25,4 mm) with a adhesive tape - #LB1063
LUCKY BOB Lead sheet thickness .063" (1,6 mm), 2" x 1" (50,8 x 25,4 mm) with a adhesive tape
-
KOFORD LEAD WIRE RETAINER, 1 pc. - #M324
Lead wire retainer. Prevents lead wire from dragging on track, solders to middle rail.
-
MOSSETTI PATRIOT CHASSIS CLIP, 1 pc - #MR1051
Retaining Clip (2) – All Chassis
-
MOSSETTI Chassis connector J bar (2) 1.3 mm (.050") - #MR1049
MOSSETTI Chassis connector J bar (2) 1.3 mm (.050") - #MR1049
New J Bar chassis clip. Works with Mossetti, Mid America and JK chassis.
-
HORKY 2024 ES 1/32 Chassis Assembled without ballbearings (picture can be not actual)
It is delivered under the order
Perhaps a slight change in price, depending on the terms of delivery.