Axles, Bearings, Oilites & Axle spacers
-
ZHB Axle ballbearing 3 х 7 х 3 mm, shielded, 7 balls - 1 Pc. - #3x7x3
Axle ballbearing 3 х 7 х 3 mm, shielded, 7 balls - 1 Pc. - #3x7x3
-
ZHB AXLE Ballbearing 3 х 9 х 3 mm, flanged shielded, 7 balls, pair - #3x9x3F
AXLE Ballbearing 3 х 9 х 3 mm, flanged shielded, 7 balls, pair - #3x9x3F
-
ZHB Ballbearing 3 х 7 х 3 mm, flanged shielded, 7 balls - 1 Pc. - #3х7х3F
Ballbearing 3 х 7 х 3 mm, flanged shielded, 7 balls - 1 Pc. - #3х7х3F
-
ARP Phenolic axle spacer bearing shields 3/32" (2,36 mm) x .250 (6,35 mm) OD, 10 pcs. - #arp-pbs-1
ARP Phenolic axle spacer bearing shields 3/32" (2,36 mm) x .250 (6,35 mm) OD, 10 pcs. - #arp-pbs-1
Phenolic axle spacer shields to protect bearings on retro front tires. 3/32 id x .250 od - 10 pieces per bag
-
CAHOZA 3/32" (2.36 mm), .012" (0,3 mm) THICK, BRONZE AXLE SPACER, 24 pcs. - #35
PHOSPHOR BRONZE SPACERS 3/32 phosphor bronze axle spacers, 0,25mm (.01"), very hard but will not stick to magnets, packaged 24 per bag
-
CAHOZA ARM (2 mm) SPACER BRONZE .007" (0,18 mm), 24 psc. - #37
PHOSPHOR BRONZE SPACERS 0,18
the same as #36, but thickness is 0,18mm (.007"), packaged 24 per bag -
CAHOZA ARM (2 mm) SPACER BRONZE .012" (0,3 mm), 24 psc. - #38
PHOSPHOR BRONZE SPACERS 0,3
the same as #36, but thickness is 0,3mm (.0118"), packaged 24 per bag -
CAHOZA ARM SPACER BRONZE .004", 24 psc. - #36
PHOSPHOR BRONZE SPACERS 0,1
phosphor bronze spacers, thickness 0,1 mm (.004"), ultra precision fit on armature shaft to eliminate vibration due to loose fit, phosphor bronze is very hard, but will not stick to magnets, packaged 24 per bag -
CAHOZA Ø2 mm AXLE (length 55 mm) - #24
SOLID AXLE 2MM
solid 2mm axle, highly durable 60HRc, axle is very fine grinded and polished, the 2mm diameter is very accurate with maximum deflection of 0,001 mm (.00004"), great straightness along the entire length, it is crooked to max. 0,005 mm (.0002") throughout the entire length, ends are also grinded, exact diameter of this axle is 1,992mm (.07838"), length is 51mm (2") the best axle ever available for Scale racing -
CAHOZA Ø3/32" (2.36 mm) AXLE (length 53.1 mm) - #23
SOLID AXLE 3/32
solid 3/32" axle, highly durable 60HRc, axle is very fine grinded and polished, the 3/32" diameter is very accurate with maximum deflection of 0,001 mm (.00004"), great straightness along the entire length, it is crooked to max. 0,005 mm (.0002") throughout the entire length, ends are also grinded, exact diameter of this axle is 2,371 mm (.093346"), the best axle ever available for profi racing -
CHAMPION 1/8" X 3/16" (3.15 X 4.76 MM) AXLE BUSHINGS IN PRODUCTION CHASSIS, pair - #CHA709
1/8" X 3/16" (3.15 X 4.76 MM) AXLE BUSHINGS IN PRODUCTION CHASSIS, pair
-
CHICAGOLAND RACEWAY 3/32" (2.36 mm) x .400" (10.16 mm) Brass pre-cut axle spacer / hub-adapter (3/32" -> 1/8"), 1 pc. - #CR011
CHICAGOLAND RACEWAY 3/32" (2.36 mm) x .400" (10.16 mm) Brass pre-cut axle spacer / hub-adapter (3/32" -> 1/8"), 1 pc.
It is convenient when setting the gear gap to F1 / 32, if there is a dremel, you can make a spacer of the required width.
It can also be used as an hub-adapter 3/32 "-> 1/8"
-
DUBICK 2 mm, .059" (1,5 mm) thick aluminium axle spacer, 1 pc. - #DB713-1.5
DUBICK 2 mm, .059" (1,5 mm) thick aluminium axle spacer, 1 pc. - #DB713-1.5
-
DUBICK 2 mm, .079" (2 mm) thick aluminium axle spacer, 1 pc. - #DB713-2
DUBICK 2 mm, .079" (2 mm) thick aluminium axle spacer, 1 pc. - #DB713-2
-
DUBICK 2 mm, .098" (2,5 mm) thick aluminium axle spacer, 1 pc. - #DB713-2.5
DUBICK 2 mm, .098" (2,5 mm) thick aluminium axle spacer, 1 pc. - #DB713-2.5
-
DUBICK 2 mm, .22" (5,5 mm) thick aluminium axle spacer, 1 pc. - #DB712-5.5
DUBICK 2 mm, .22" (5,5 mm) thick aluminium axle spacer, 1 pc. - #DB712-5.5
-
DUBICK 2 mm, .24" (6 mm) thick aluminium axle spacer, 1 pc. - #DB712-6
DUBICK 2 mm, .24" (6 mm) thick aluminium axle spacer, 1 pc. - #DB712-6
-
DUBICK 2 mm, .26" (6,5 mm) thick aluminium axle spacer, 1 pc. - #DB712-6.5
DUBICK 2 mm, .26" (6,5 mm) thick aluminium axle spacer, 1 pc. - #DB712-6.5
-
DUBICK 2 mm, .28" (7 mm) thick aluminium axle spacer, 1 pc. - #DB712-7
DUBICK 2 mm, .28" (7 mm) thick aluminium axle spacer, 1 pc. - #DB712-7
-
DUBICK armature bronze spacers 4.6 mm thick, 2 pcs. - #DB4034
DUBICK armature bronze spacers 4.6 mm thick, 2 pcs. - #DB4034
-
DUBICK Axle ballbearing 1/8" x 1/4" (3.15 mm x 6.35 mm), sheilded, flanged, pair - #DE719
DUBICK Axle ballbearing 1/8" x 1/4" (3.15 mm x 6.35 mm), sheilded, flanged, pair - #DE719
-
DUBICK AXLE Ballbearing 3/32" х 3/16" х 3/32" (2.36 х 4.76 х 2.36 mm) flanged shielded, 7 balls, pair - #DB609
DUBICK AXLE Ballbearing 3/32" х 3/16" х 3/32" (2.36 х 4.76 х 2.36 mm) flanged shielded, 7 balls, pair - #DB609
Flanged ballbearings for rear bridge
-
DUBICK Ballbearing 2 х 5 х 2,3 mm flanged, shielded, 7 balls, pair - #DB608
DUBICK Ballbearing 2 х 5 х 2,3 mm flanged, shielded, 7 balls, pair - #DB608
-
DUBICK Precision Ballbearing 2 х 5 х 2.3 mm, flanged, shielded - #DB607
DUBICK Precision Ballbearing 2 х 5 х 2.3 mm, flanged, shielded - #DB607