ZHB

Under the designation ZHB are hidden motors or models, assembly by Andrei Zhbanov

Also these are the products of various manufacturers, the profile of which is not related to slotraising, but we use their products.

• 

  ZHB ORGANIZER with 12 compartments 133×78×16 mm, transparent, plastic

  PARAMETERS

  • Material: Transparent plastic
  • Dimension, mm: 133×78×16
  • Quantity of sections, pcs.: 12

  3.95 ₤

• 

  ZHB REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 25 mm, pair

  REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 25 mm, pair

  Suitable for the model with any height of the rear axle, if necessary, you need to remove the "crust" on the machine for processing tires or lathe.

  PARAMETERS

  • Inside dia., mm: 9,5
  • Outside dia., mm: ~ 25
  • Width, mm: 22

  This tires cut for GM & F1/24 (Nesterenko)

  0.40 ₤

• 

  ZHB MAGNETIZATION OF THE MAGNETS - #100

  Magnetize possible any magnets from ferrite to samarium-cobalt

  1.58 ₤

• 

  ZHB Organiser 145×232×23 mm, transparent plastic

  PARAMETERS

  • Material: Transparent plastic
  • Dimension, mm: 145×232×23

  3.95 ₤

• 

  ZHB .050" ALLEN WRENCH, W/OUT HANDLE, Г-type look

  .050" ALLEN WRENCH, W/OUT HANDLE, Г-type look

  The simplest & cheap allen wrench for the beginning racers!

  0.40 ₤

• 

  ZHB Ballbearing 1 х 3 х 1 mm open , 6 balls - 1 Pc.

  Ballbearing 1 х 3 х 1 mm open , 6 balls - 1 Pc.

  1.58 ₤

• 

  ZHB Organiser 145×232×23 mm, green, w/transparent cover, plastic

  These round polyethylene plastic snap lid containers with foam are though and strong. They are great for protection cans and setups when mailing them for service.

  3.95 ₤

• 

  BOLID GM FORD AEROMAX BODY, PVC, thickness .015" (0.4 mm), w/interior & w/paint masks

  GM 1/24 FORD AEROMAX Body

  • Made from: Polyvinyl chloride (PVC)
  • For: GM (Truck)
  • Thickness: .015" (0.4 mm)
  • w/interior &
    • w/paint masks

  4.16 ₤

• 

  ZHB Ø1.16 mm FRONT AXLE, CARBON, (length ~ 80 mm)

  Ø1.16 MM FRONT AXLE, CARBON, (length ~ 80 mm) used in Production 1/24 & Production 1/32 for made forward track with smal ribber wheels

  0.79 ₤

• 

  ZHB REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 33 mm, pair

  REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 33 mm, pair

  Suitable for the model with any height of the rear axle, if necessary, you need to remove the "crust" on the machine for processing tires or lathe.

  PARAMETERS

  • Inside dia., mm: 9,5
  • Outside dia., mm: ~ 33
  • Width, mm: 22

  This tires cut for GM & F1/24 (Nesterenko)

  0.40 ₤

• 

  ZHB OPTIONAL TORSION for CHASSIS PRODUCTION 1/24 JK 4" "CHEETAH X25", Ø1.2 mm

  ISRA legal torsion for  JKP 4" CHEETAH X25 KIT 0.9MM THICK chassis for PRODUCTION 1/24- #JKPX25. 
  Allows you to quickly disassemble and assemble the chassis and still remains flat.

  1.19 ₤

• 

  ZHB Ballbearing 1.5 х 4 х 1.2 mm open , 6 balls - 1 Pc.

  Ballbearing 1.5 х 4 х 1.2 mm  open , 6 balls - 1 Pc.

  1.58 ₤

• 

  ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*150 mm

  ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*150 mm

  Very high quality fiberglass. It is well spilled with resin and does not separate.

  0.55 ₤

• 

  ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*200 mm

  ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*200 mm

  Very high quality fiberglass. It is well spilled with resin and does not separate.

  0.74 ₤

• 

  ZHB Fiberglass sheet, w/out foil, thick. 2 mm, sheet 100*150 mm

  ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*200 mm

  Very high quality fiberglass. It is well spilled with resin and does not separate.

  0.62 ₤

• 

  ZHB Organiser 145×232×23 mm, blue, w/transparent cover, plastic

  PARAMETERS

  • Material: Transparent plastic
  • Dimension, mm: 50×45×15
  • Quantity of sections, pcs.: 1

  3.95 ₤

• 

  ZHB Digital Calipers 150 mm (6"). Accuracy: +/- .02mm/.001inch. Plastic box and 2 pc battery.

  Specs:
  Range: 0-150mm
  Accuracy: +/- .02mm/.001inch
  Resolution: .01mm/0.0005inch
  Repeatability: 0.01mm/0.0005inch
  Max Measuring Speed: 1.5m/s, 60inch/s (FAST)
  Operating Temp: 0~40Deg Celcius
  Storage Temp: -10~60Deg Celcius
  Power: 1.5v SR44 Battery

  17.38 ₤

• 

  ZHB Organiser 104×176×23 mm, with 15 configurable compartments, clear plastic

  PARAMETERS

  • Material: Transparent plastic
  • Dimension, mm: 75×60×18
  • Quantity of sections, pcs.: 6
  • *For small parts

  5.14 ₤

• 

  ZHB Fiberglass sheet, w/out foil, thick. 2 mm, sheet 100*200 mm

  ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*200 mm

  Very high quality fiberglass. It is well spilled with resin and does not separate.

  0.82 ₤

• 

  ZHB Tweezers for small parts. Made from stainless steel.

  3.95 ₤

• 

  ZHB Organizer universal 280 х 190 х 30 mm (11.02" x 7.48" x 1.18"), with 40 configurable compartments, grey, w/transparent cover, plastic

  ZHB Organizer universal

  • Material: plastic with transparent cover.
  • Dimension, mm (in.): 280 х 190 х 30 mm (11.02" x 7.48" x 1.18").
  • Quantity of configurable sections, pcs.: 40.
  • Dimension of section, mm (in.): 33 x 33 (1.29" x 1.29").

  • Conveniently customizable sections specifically for your needs!
  • Secure locks prevent unwanted opening of the organizer.

  4.16 ₤

• 

  ZHB SUPER GLUE "MONOLIT"

  Good super glue with a dispenser. Suitable for gluing magnets and other works.

  0.12 ₤

• 

  CAHOZA ES24 glyed gear 72 PITCH 38 teeth (Ø14.52 mm) on 3/32" Proslot axle - ZHB#230

  The hub is not cut width, but machined to a diameter 3 mm.

  This gear for ES32 if you use offset rims in gears side or for ES24.

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  9.48 ₤

• 

  CAHOZA GEAR CAHOZA 64 PITCH, 36T, 0° angle, 3/32" axle, Ø15.00 mm glued on 3/32" axle CAHOZA - CAH#6-AG

  The hub is not cut width, but machined to a diameter 3 mm.

  This gear for ES32 if you use offset rims in gears side or for ES24.

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  9.48 ₤

• 

  ZHB LEAD WIRE RETAINER, 1 pc.

  Lead wire retainer. Prevents lead wire from dragging on track, solders to middle rail.

  0.32 ₤

• 

  ZHB FRONT RUBBER TIRES, pair

  FRONT RUBBER TIRES for production 1/32 & 1/24. (Best with front carbon axle)

  0.79 ₤

• 

  ZHB TOOL & MODEL BOX W/ORGANIZER

  Very convenient and practical working case.

  5.10 ₤

• 

  ZHB Set of steel files, 3 pcs.

  ZHB Set of steel files, 3 pcs.

  0.00 ₤

• 

  ZHB SET OF SMALL STEEL FILES W/DIAMOND COATING, 10 pcs.

  Set of small steel files with diamond coating 10 pcs.

  9.48 ₤

• 

  ZHB SET OF SMALL STEEL FILES W/DIAMOND COATING, 12 pcs.

  Set of small steel files with diamond coating 12 pcs.

  7.90 ₤

• 

  S&K 72 PITCH 39T, 0° angle, 3/32" axle, Ø14.3 мм, glued on 3/32" Proslot axle - ZHB#223

  he hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  9.48 ₤

• 

  CAHOZA ES24 glyed gear 72 PITCH 39 teeth (Ø14.52 mm) on 3/32" Proslot axle - ZHB#229

  The hub is not cut width, but machined to a diameter 3 mm.

  This gear for ES32 if you use offset rims in gears side or for ES24.

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  9.48 ₤

• 

  ZHB Metal drill, dia. 2,1 mm

  ZHB Metal drill, dia. 2,1 mm

  Made in USSR!

  1.58 ₤

• 

  ZHB Ballbearing 3 х 7 х 3 mm flanged, 1 Pc. - #3х7х3F

  Ballbearing 3 х 7 х 3 mm flanged, 1 Pc. - #3х7х3F

  This ballbearing instalation in Controller trigger

  1.58 ₤

• 

  ZHB DIAMOND MAGNET HONE Ø12.05 mm

  ZHB DIAMOND MAGNET HONE Ø12.05 mm

  11.77 ₤

• 

  ZHB DIAMOND MAGNET HONE Ø12.25 mm

  ZHB DIAMOND MAGNET HONE Ø12.25 mm

  31.60 ₤

• 

  ZHB DIAMOND MAGNET HONE Ø12.30 mm

  ZHB DIAMOND MAGNET HONE Ø12.30 mm

  31.60 ₤

• 

  CAHOZA GEAR CAHOZA 64 PITCH, 36T, 0° angle, 3/32" axle, Ø15.00 mm glued on 3/32" axle CAHOZA, hub machined to the dia. 3.7 mm - CAH#6-AG

  CAHOZA GEAR CAHOZA 64 PITCH, 36T, 0° angle, 3/32" axle, Ø15.00 mm glued on 3/32" axle CAHOZA, hub machined to the dia. 3.7 mm

  This gear for ES32 if you use offset rims in gears side or for ES24.

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  9.48 ₤

• 

  CAHOZA ES32 glyed gear 72 PITCH 39 teeth (Ø14.52 mm) on 2 mm KOFORD axle - ZHB#226

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  9.48 ₤

• 

  S&K ES32 72 PITCH, 39T, 0° angle, 2 mm axle, Ø14.3 mm, glued on 2 mm KOFORD axle - ZHB#222

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  9.48 ₤

• 

  S&K 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.65 мм, glued on 3/32" Proslot axle - ZHB#224

  The hub is not cut width, but machined to a diameter 3 mm.

  This gear for ES32 if you use offset rims in gears side or for ES24.

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  9.48 ₤

• 

  CAHOZA ES24 glyed gear 72 PITCH 40 teeth (Ø14.85 mm) on 3/32" Proslot axle - ZHB#231

  The hub is not cut width, but machined to a diameter 3 mm.

  This gear for ES32 if you use offset rims in gears side or for ES24.

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  9.48 ₤

• 

  CAHOZA ES32 or ES24 glyed gear 72 PITCH 39 teeth (Ø14.52 mm) on 2 mm KOFORD axle - ZHB#228

  The hub is not cut width, but machined to a diameter 3 mm.

  This gear for ES32 if you use offset rims in gears side or for ES24.

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  9.48 ₤

• 

  JK 72 PITCH, 40T, 0° angle, 2 mm axle, Ø14.65 mm, glued on 2 mm axle KOFORD - ZHB#232

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  9.48 ₤

• 

  S&K 72 PITCH, 40T, 0° angle, 2 mm axle, Ø14.65 mm, glued on 2 mm axle KOFORD - ZHB#220

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  9.48 ₤

• 

  CAHOZA glyed 72 PITCH 40T (Ø14.8 mm) gear on 2 mm KOFORD axle - ZHB#221

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  9.48 ₤

• RED FOX 80 PITCH 43T, 0° angle, 2 mm axle, Ø14.35 mm glued on 2 mm axle KOFORD - ZHB#203

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  9.48 ₤

• 

  ZHB DIAMOND MAGNET HONE Ø12.35 mm

  ZHB DIAMOND MAGNET HONE Ø12.35 mm

  31.60 ₤

• 

  ZHB Desktop mat for work, dimensions 600 x 450 x 2.9 mm (A2 format)

  • Size: 600 x 450 x 2.9 mm (A2).
  • Thickness: 2.9 mm.
  • Colour: green.
  • The table mat is made from high durable PVC.

  7.06 ₤

• 

  ZHB TAP 0-80 (1,52 mm) FOR CUTTING OF AN INCH THREAD IN ENDBELLS

  TAP 0-80 (1,52 mm)  FOR CUTTING OF AN INCH THREAD IN ENDBELLS

  4.74 ₤

• 

  ZHB KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24 w/hole to the motor, thick. 1,5 mm w/foil, w/drawing of the chassis parts

  Parameters:

  • Kit for buid chassis: "SUPER-TEAPOT" 1/24 (w/hole to the motor)
  • Scale: 1:24
  • Thick.: 1,5 mm w/foil
  • w/drawing of the chassis details

  1.18 ₤

• 

  ZHB KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24 w/hole to the motor, thick. 2 mm w/out foil, w/drawing of the chassis parts

  Parameters:

  • Kit for buid chassis: "SUPER-TEAPOT" 1/24 (w/hole to the motor)
  • Scale: 1:24
  • Thick.: 2 mm w/out foil
  • w/drawing of the chassis details

  1.18 ₤

• 

  ZHB KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24 w/hole to the motor, thick. 1,5 mm w/foil, full cut details kit, ready for assembly by the rivets

  Parameters:

  • Kit for buid chassis: "SUPER-TEAPOT" 1/24 (w/hole to the motor)
  • Scale: 1:24
  • Thick.: 1,5 mm w/foil
  • full cut details kit, ready for assembly by the rivets

  
  

  2.35 ₤

• 

  ZHB KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24 w/hole to the motor, thick. 2 mm w/out foil, full cut details kit, ready for assembly by the rivets

  Parameters:

  • Kit for buid chassis: "SUPER-TEAPOT" 1/24 (w/hole to the motor)
  • Scale: 1:24
  • Thick.: 2 mm w/out foil
  • full cut details kit, ready for assembly by the rivets

  2.35 ₤

• S&K Gear 80 PITCH 43T, 0° angle, 2mm axle, Ø14.3 mm glued on 2 mm axle KOFORD - ZHB#201

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  9.48 ₤

• 

  ZHB ALUMINUM RIVETS Ø2 * 4 mm, WITH A CONVEX HEAD FOR ASSEMBLING THE "TEAPOT" CHASSIS, 50 pcs.

  ZHB ALUMINUM RIVETS Ø2 * 4 mm, WITH A CONVEX HEAD FOR ASSEMBLING THE "TEAPOT" CHASSIS, 50 pcs.

  0.62 ₤

• 

  ZHB Brass rivets Ø2 *4.1 mm, with countersunk head for assembling the "TEAPOT" chassis, 50 pcs.

  ZHB Brass rivets Ø2 *4.1 mm, with countersunk head for assembling the "TEAPOT" chassis, 50 pcs.

  0.62 ₤

• 

  ZHB BRASS RIVETS Ø2 * 7 mm, WITH COUNTERSUNK HEAD FOR ASSEMBLING THE "TEAPOT" CHASSIS, 50 pcs.

  ZHB BRASS RIVETS Ø2 * 7 mm, WITH COUNTERSUNK HEAD FOR ASSEMBLING THE "TEAPOT" CHASSIS, 50 pcs.

  0.62 ₤

• 

  ZHB Duralumin rivets Ø2 * 8 mm, with countersunk head for assembling the "TEAPOT" chassis, 50 pcs.

  ZHB Duralumin rivets Ø2 * 8 mm, with countersunk head for assembling the "TEAPOT" chassis, 50 pcs.

  0.86 ₤

• 

  ZHB ALUMINUM RIVETS Ø2 * 8 mm, WITH COUNTERSUNK HEAD FOR ASSEMBLING THE "TEAPOT" CHASSIS, 50 pcs.

  ZHB ALUMINUM RIVETS Ø2 * 8 mm, WITH COUNTERSUNK HEAD FOR ASSEMBLING THE "TEAPOT" CHASSIS, 50 pcs.

  0.62 ₤

• ZHB PRODUCTION 1/32 MODEL KIT IN THE MINIMUM CONFIGURATION

  This is a kit of production model 1/32 in the simplest configuration: chassis bronze, 64 pitch, engine without modifications, clips instead of tubes, lexan body.

  46.61 ₤

• 

  ZHB Lead sheet thickness 0.5 mm, 100 х 100 mm

  Lead sheet thickness 0.5 mm, 100 х 100 mm can help you to configure your chassis. 

  *To fix, you must use glue or double adhesive tape!

  0.40 ₤

• 

  ZHB DYNAMIC BALANCING OF THE ARMATURE - #101

  The price of rebalancing the armature includes a commutator groove.

  2.37 ₤

• 

  ZHB LANE STICKERS, set for race

  ZHB LANE STICKERS, set for race

  Lane stickers for model, from 1 to 8 lane

  0.08 ₤

• 

  ZHB Lead sheet thickness 1 mm, 100 х 100 mm

  Lead sheet thickness 1 mm, 100 х 100 mm can help you to configure your chassis. 

  *To fix, you must use glue or double adhesive tape!

  0.40 ₤

• 

  ZHB DIAMOND MAGNET HONE Ø12.82 mm

  ZHB DIAMOND MAGNET HONE Ø12.82 mm

  11.77 ₤

• ZHB PAINT MASK FOR BODY

   ZHB PAINT MASK FOR BODY

  0.08 ₤

• 

  S&K 80 PITCH 44T, 0° angle, 2mm axle, Ø14.6 mm glued on 2 mm axle KOFORD - ZHB#204

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  9.48 ₤

• JK 80 PITCH 44T, 0° angle, 2mm axle, Ø14.6 mm glued on 2 mm axle KOFORD - ZHB#205

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  9.48 ₤

• 

  ZHB Precision Ballbearing 2 х 6 х 3 mm, shielded - #2x6х2,5

  Ballbearing 2 х 6 х 3 mm, shielded - #2x6х2,5

  1.58 ₤

• 

  HORKY BIG HUB 80 PITCH 44T, 0° angle, 2 mm axle, Ø14.5 mm glued on 2 mm axle KOFORD - ZHB#206

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  9.48 ₤

• 

  ZHB DIAMOND MAGNET HONE Ø 0.540"

  ZHB DIAMOND MAGNET HONE Ø12.85 mm

  23.70 ₤

• 

  ZHB DIAMOND MAGNET HONE Ø12.85 mm

  ZHB DIAMOND MAGNET HONE Ø12.85 mm

  11.77 ₤

• 

  CAHOZA 80 PITCH 44T, 0° angle, 2 mm axle, Ø14.5 mm glued on 2 mm axle KOFORD - ZHB#207

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  9.48 ₤

• 

  ZHB SET OF BRUSHES WITH THE STEEL, COPPER AND VISCOSE BRISTLE, 3 pcs.

  SET OF BRUSHES WITH THE STEEL, COPPER AND VISCOSE BRISTLE, 3 pcs.

  Braid/Chassis Brush. Features super strong bristles and rugged handle - makes quick work of serious braid work or the removal of stubborn chassis crud.

  Brush made of stainless steel for fluffing brushes in a guide

  2.75 ₤

• 

  ZHB MAGNETIC TRAY FOR STORAGE SMALL PARTS ON WORKTABLE

  MAGNETIC TRAY FOR STORAGE SMALL PARTS ON WORKTABLE

  Very need thing on your work tables! This tray can eliminate lose & drop on the floor small parts, such as screws, pinions & others.

  3.95 ₤

• 

  ZHB DIAMOND MAGNET HONE ANY DIA., special order

  DIAMOND MAGNET HONE ANY DIA.

  Special order

  19.75 ₤

• 

  ZHB SCISSORS MEDICAL STRAIGHT

  SCISSORS MEDICAL STRAIGHT

  Scissors for cutting models body and other things such as adhesive tape, lexan for strengthening, paper or cardboard. The best medical stanles steel!

  3.93 ₤

• 

  ZHB F1 TOOL SETUP, .256 long - .376 tall - can ID .570

  F1/32 SETUP TOOL

  PARAMETERS

  • Magnets quantity: 2
  • Dia. for gluing magnets: 14.7 mm
  • Outside dia.: .570" 
  • Magnets height: .376" 
  • Magnets length: .256" 
  • For armature: KOFORD ULTRA SHORT (M255EH)
  • Ballbearings: GRW (1,5 mm width)

  124.73 ₤

• 

  ZHB F1 10M SETUP, .256 long - .376 tall - can ID .570

  SPECIAL ORDER!

  F1/32 SETUP 10 MAGNETS

  PARAMETERS

  • Magnets quantity: 10
  • Dia. for gluing magnets: 14.7 mm
  • Outside dia.: .570" 
  • Magnets height: .376" 
  • Magnets length: .256" 
  • For armature: KOFORD ULTRA SHORT (M255EH)
  • Ballbearings: GRW (1,5 mm width)

  This is no actual photo! Actual photos will be added later!

  
  

  153.84 ₤

• 

  ZHB F1 12M SETUP, .256 long - .376 tall - can ID .570

  SPECIAL ORDER!

  F1/32 SETUP 12 MAGNETS

  PARAMETERS

  • Magnets quantity: 10
  • Dia. for gluing magnets: 14.7 mm
  • Outside dia.: .570" 
  • Magnets height: .376" 
  • Magnets length: .256" 
  • For armature: KOFORD ULTRA SHORT (M255EH)
  • Ballbearings: GRW (1,5 mm width)

  This is no actual photo! Actual photos will be added later!

  
  

  158.00 ₤

• 

  ZHB ES32 TOOL SETUP, .300 long - .450 tall - can  ID .577

  SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS

  ES-32 SETUP TOOL

  PARAMETERS

  • Magnets quantity: 2
  • Outside dia.: .577" 
  • Magnets height: .450" 
  • Magnets length: .300" 
  • Ballbearings: GRW (2 х 5 х 2,3 mm)

  124.73 ₤

• 

  ZHB ES32 10M SETUP, .300 long - .450 tall - can  ID .577

  SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS

  ES-32 SETUP 10 MAGNETS

  PARAMETERS

  • Magnets quantity: 10
  • Outside dia.: .577" 
  • Magnets height: .450" 
  • Magnets length: .300" 
  • Ballbearings: GRW (2 х 5 х 2,3 mm)

  153.84 ₤

• 

  ZHB ES32 12M SETUP, .300 long - .450 tall - can  ID .577

  SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS

  ES-32 SETUP 12 MAGNETS

  PARAMETERS

  • Magnets quantity: 12
  • Outside dia.: .577" 
  • Magnets height: .450" 
  • Magnets length: .300" 
  • Ballbearings: GRW (2 х 5 х 2,3 mm)

  158.00 ₤

• 

  ZHB ES32 14M SETUP, .300 long - .450 tall - can  ID .577

  SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS

  ES-32 SETUP 14 MAGNETS

  PARAMETERS

  • Magnets quantity: 14
  • Outside dia.: .577" 
  • Magnets height: .450" 
  • Magnets length: .300" 
  • Ballbearings: GRW (2 х 5 х 2,3 mm)

  162.16 ₤

• 

  ZHB ES32 16M SETUP, .300 long - .450 tall - can  ID .577

  SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS

  ES-32 SETUP 16 MAGNETS

  PARAMETERS

  • Magnets quantity: 16
  • Outside dia.: .577" 
  • Magnets height: .450" 
  • Magnets length: .300" 
  • Ballbearings: GRW (2 х 5 х 2,3 mm)

  166.32 ₤

• 

  ZHB ES32 18M SETUP, .300 long - .450 tall - can  ID .577

  SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS

  ES-32 SETUP 18 MAGNETS

  PARAMETERS

  • Magnets quantity: 18
  • Outside dia.: .577" 
  • Magnets height: .450" 
  • Magnets length: .300" 
  • Ballbearings: GRW (2 х 5 х 2,3 mm)

  170.47 ₤

• 

  ZHB ES32 20M SETUP, .300 long - .450 tall - can  ID .577

  SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS

  ES-32 SETUP 20 MAGNETS

  PARAMETERS

  • Magnets quantity: 20
  • Outside dia.: .577" 
  • Magnets height: .450" 
  • Magnets length: .300" 
  • Ballbearings: GRW (2 х 5 х 2,3 mm)

  174.63 ₤

• 

  ZHB ES32 22M SETUP, .300 long - .450 tall - can  ID .577

  SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS

  ES-32 SETUP 20 MAGNETS

  PARAMETERS

  • Magnets quantity: 20
  • Outside dia.: .577" 
  • Magnets height: .450" 
  • Magnets length: .300" 
  • Ballbearings: GRW (2 х 5 х 2,3 mm)

  174.63 ₤

• 

  ZHB ES24 TOOL SETUP, .300 long - .450 tall - can  ID .590

  SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS

  ES-24 SETUP TOOL

  PARAMETERS

  • Magnets quantity: 2
  • Outside dia.: .590" 
  • Magnets height: .450" 
  • Magnets length: .300" 
  • Ballbearings: GRW (2 х 5 х 2,3 mm)

  124.73 ₤

• 

  ZHB ES24 10M SETUP, .300 long - .450 tall - can  ID .590

  SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS

  ES-24 SETUP 10 MAGNETS

  PARAMETERS

  • Magnets quantity: 10
  • Outside dia.: .590" 
  • Magnets height: .450" 
  • Magnets length: .300" 
  • Ballbearings: GRW (2 х 5 х 2,3 mm)

  153.84 ₤

• 

  ZHB ES24 12M SETUP, .300 long - .450 tall - can  ID .590

  SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS

  ES-24 SETUP 12 MAGNETS

  PARAMETERS

  • Magnets quantity: 12
  • Outside dia.: .590" 
  • Magnets height: .450" 
  • Magnets length: .300" 
  • Ballbearings: GRW (2 х 5 х 2,3 mm)

  158.00 ₤

• 

  ZHB ES24 14M SETUP, .300 long - .450 tall - can  ID .590

  SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS

  ES-24 SETUP 14 MAGNETS

  PARAMETERS

  • Magnets quantity: 14
  • Outside dia.: .590" 
  • Magnets height: .450" 
  • Magnets length: .300" 
  • Ballbearings: GRW (1,5 mm width)

  162.16 ₤

• 

  ZHB ES24 16M SETUP, .300 long - .450 tall - can  ID .590

  SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS

  ES-24 SETUP 16 MAGNETS

  PARAMETERS

  • Magnets quantity: 16
  • Outside dia.: .590" 
  • Magnets height: .450" 
  • Magnets length: .300" 
  • Ballbearings: GRW (2 х 5 х 2,3 mm)

  166.32 ₤

• 

  ZHB ES24 18M SETUP, .300 long - .450 tall - can  ID .590

  SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS

  ES-24 SETUP 18 MAGNETS

  PARAMETERS

  • Magnets quantity: 18
  • Outside dia.: .590" 
  • Magnets height: .450" 
  • Magnets length: .300" 
  • Ballbearings: GRW (2 х 5 х 2,3 mm)

  170.47 ₤

• 

  ZHB ES24 22M SETUP, .300 long - .450 tall - can  ID .590

  SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS

  ES-24 SETUP 24 MAGNETS

  PARAMETERS

  • Magnets quantity: 24
  • Outside dia.: .590" 
  • Magnets height: .450" 
  • Magnets length: .300" 
  • Ballbearings: GRW (2 х 5 х 2,3 mm)

  174.63 ₤

• 

  ZHB ES24 24M SETUP, .300 long - .450 tall - can  ID .590

  SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS

  ES-24 SETUP 24 MAGNETS

  PARAMETERS

  • Magnets quantity: 24
  • Outside dia.: .590" 
  • Magnets height: .450" 
  • Magnets length: .300" 
  • Ballbearings: GRW (2 х 5 х 2,3 mm)

  182.95 ₤

• 

  ZHB ES24 32M SETUP, .300 long - .450 tall - can  ID .590

  SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS

  ES-24 SETUP 32 MAGNETS

  PARAMETERS

  • Magnets quantity: 32
  • Outside dia.: .590" 
  • Magnets height: .450" 
  • Magnets length: .300" 
  • Ballbearings: GRW (2 х 5 х 2,3 mm)

  207.90 ₤

• ZHB ES24 TOOL MOTOR

  Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,98 mm (.590"), armature Koford (or VALIKO ceramic, blue) 19/24-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers. 

  Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)

  207.90 ₤

• ZHB ES24 10M MOTOR

  Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,98 mm (.590"), armature Koford (or VALIKO ceramic, blue) 19/24-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.

  Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)

  237.00 ₤

• ZHB F 1/32 TOOL MOTOR

  Magnet height 9,6mm (.376"), length 6.5 мм (.255"), outside diameter of magnets 14,75 mm (.580"), armature Koford (or VALIKO ceramic, blue) 45/29 ultra short Ø.465" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, BigFoot brushes, Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation , Koford spacers.

  Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)

  207.90 ₤

• ZHB ES24 12M MOTOR

  Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,98 mm (.590"), armature Koford (or VALIKO ceramic, blue) 19/24-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.

  Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)

  241.16 ₤

• ZHB ES24 14M MOTOR

  Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,98 mm (.590"), armature Koford (or VALIKO ceramic, blue) 19/24-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.

  Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)

  245.32 ₤

• ZHB F 1/32 10M MOTOR

  Magnet height 9,6mm (.376"), length 6.5 mm (.255"), outside diameter of magnets 14,47 mm (.570"), armature Koford (or VALIKO ceramic, blue) 45/29 ultra short Ø.465" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, Proslot brushes, Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.

  Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)

  237.00 ₤

• ZHB ES24 16M MOTOR

  Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,98 mm (.590"), armature Koford (or VALIKO ceramic, blue) 19/24-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.

  Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)

  249.47 ₤

• ZHB ES24 18M MOTOR

  Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,98 mm (.590"), armature Koford (or VALIKO ceramic, blue) 19/24-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.

  Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)

  253.63 ₤

• ZHB ES24 CAHOZA 20М MOTOR

  Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,98 mm (.590"), armature Koford (or VALIKO ceramic, blue) 19/24-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.

  Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)

  270.27 ₤

• ZHB ES24 22M MOTOR

  Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,98 mm (.590"), armature Koford (or VALIKO ceramic, blue) 19/24-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.

  Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)

  257.79 ₤

• ZHB ES24 24M MOTOR

  Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,98 mm (.590"), armature Koford (or VALIKO ceramic, blue) 19/24-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.

  Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)

  266.10 ₤

• ZHB F 1/32 CAHOZA 10M MOTOR

  Magnet height 9,6mm (.376"), length 6.5 mm (.255"), outside diameter of magnets 14,47 mm (.570"), armature Koford (or VALIKO ceramic, blue) 45/29 ultra short Ø.465" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, Proslot brushes, Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.

  Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)

  270.27 ₤

• ZHB ES24 CAHOZA 24М MOTOR

  Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,98 mm (.590"), armature Koford (or VALIKO ceramic, blue) 19/24-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.

  Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)

  291.05 ₤

• ZHB ES32 TOOL MOTOR

  Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,65 mm (.577"), armature Koford (or VALIKO ceramic, blue) 25/25-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.

  Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)

  207.90 ₤

• ZHB ES32 10M MOTOR

  Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,65 mm (.577"), armature Koford (or VALIKO ceramic, blue) 25/25-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.

  Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)

  237.00 ₤

• ZHB ES32 12M MOTOR

  Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,65 mm (.577"), armature Koford (or VALIKO ceramic, blue) 25/25-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.

  Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)

  241.16 ₤

• ZHB ES32 14M MOTOR

  Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,65 mm (.577"), armature Koford (or VALIKO ceramic, blue) 25/25-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.

  Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)

  245.32 ₤

• ZHB ES32 16М MOTOR

  Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,65 mm (.577"), armature Koford (or VALIKO ceramic, blue) 25/25-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.

  Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)

  249.47 ₤

• ZHB CAHOZA ES32 16М MOTOR

  Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,65 mm (.577"), armature Koford (or VALIKO ceramic, blue) 25/25-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.

  Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)

  278.58 ₤

• ZHB ES32 18М MOTOR

  Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,65 mm (.577"), armature Koford (or VALIKO ceramic, blue) 25/25-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.

  Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)

  253.63 ₤

• ZHB ES32 22М MOTOR

  Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,65 mm (.577"), armature Koford (or VALIKO ceramic, blue) 25/25-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.

  Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)

  257.79 ₤

• 

  S&K Gear 72 pitch 42 teeth, 0° angle, 3/32" axle, Ø15.46 mm glyed on Proslor axle - #225

  The hub is not cut width, but machined to a diameter 3 mm.

  This gear for ES32 if you use offset rims in gears side or for ES24.

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  9.48 ₤

• S&K 80 PITCH 43T, 0° angle, 3/32" axle, Ø14.3 mm glued on 3/32" axle ProSlot - ZHB#210

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109

  9.48 ₤

• VITULA 80 PITCH 43T, 0° angle, 3/32" axle, Ø14.45 mm glued on 3/32" axle ProSlot - ZHB#211

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109

  9.48 ₤

• VITULA 80 PITCH 43T, 0° angle, 3/32" axle, Ø14.45 mm glued on 3/32" axle ProSlot - ZHB_#211

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109

  9.48 ₤

• JK 80 PITCH 43T, 0° angle, 3/32" axle, Ø14.28 mm glued on 3/32" axle ProSlot - ZHB#212

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109

  9.48 ₤

• 

  HORKY BIG HUB 80 PITCH 43T, 0° angle, 3/32" axle, Ø14.35 mm glued on 3/32" axle ProSlot - ZHB#213

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  9.48 ₤

• 

  ZHB ASSEMBLY MODEL TO RACE (w/out price of parts & price of assembly of the motor ) - #102

  The price of assembling the model includes the installation of the motor, together with the soldering of the pinion and the setting of the pinion-gear position, the installation of a guide, lead wires, ballbearings or oilities and tubes for pins, if necessary.

  Any configuration is possible!!!!!

  15.80 ₤

• 

  ZHB LANE STICKERS, 10 sheets

  ZHB LANE STICKERS, 10 sheets

  Lane stickers for model, from 1 to 8 lane

  0.70 ₤

• 

  ZHB LANE STICKERS, 100 sheets

  ZHB LANE STICKERS, 100 sheets

  Lane stickers for model, from 1 to 8 lane

  6.28 ₤

• ZHB PRODUCTION 1/32 MODEL KIT IN THE MAXIMUM CONFIGURATION

  This is a kit of production model 1/32 in the maximum configuration: a three-piece JK chassis, 72 pitch, motor: setup with matched magnets + S16C armature + ballbearings + multi-coil springs + washers, tubes instead of clips, lexan body.

  93.22 ₤

• 

  ZHB ASSEMBLY OF THE MOTOR (w/out price of parts & shaft lapping) - #103

  Assembly and repair of the any motors under special order

  7.90 ₤

• ZHB LAPPING ARMATURE SHAFT TO DIA. 1,5 mm - #104

  ZHB LAPPING ARMATURE SHAFT TO DIA. 1,5 mm - #104

  3.16 ₤

• 

  ZHB Ballbearing 3 х 7 х 3 mm, flanged shielded, 7 balls - 1 Pc. - #3х7х3F

  Ballbearing 3 х 7 х 3 mm,  flanged shielded, 7 balls - 1 Pc. - #3х7х3F

  3.16 ₤

• 

  S&K 80 PITCH 45T, 0° angle, 2 mm axle, Ø14.9 mm glued on 2 mm axle KOFORD - ZHB#208

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  9.48 ₤

• S&K 80 PITCH 44T, 0° angle, 3/32" axle, Ø14.6 mm glued on 3/32" axle ProSlot - ZHB#214

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  9.48 ₤

• 

  ZHB REINFORCED TAPE (w/linear reinforcement), 12 mm x 50 m - #922

  A great option for the beginning racers! 

  2.20 ₤

• 

  ZHB SET OF STAND FOR SOLDERING IRON WITH VISCOSE SPONGE

  SET OF STAND FOR SOLDERING IRON WITH VISCOSE SPONGE. 

  Very need thing to soldering iron, preventing burning out by them surrounding objects. Also viscose spoge could clean soldering iron tip from all debris

  2.75 ₤

• 

  ZHB Axle ballbearing 3 х 7 х 3 mm, shielded, 7 balls - 1 Pc. - #3x7x3

  Axle ballbearing 3 х 7 х 3 mm,  shielded, 7 balls - 1 Pc. - #3x7x3

  1.58 ₤

• 

  ZHB COMMUTATOR GROOVING ON HIGH-PRECISION LATHE "HUDY" - #105

  ZHB COMMUTATOR GROOVING ON HIGH-PRECISION LATHE "HUDY" - #105

  0.78 ₤

• 

  ZHB PREPARING WHEELS SET (GLUING & MACHINING) - #106

  ZHB PREPARING WHEELS SET (GLUING & MACHINING) - #106

  2.37 ₤

• 

  ZHB PAINTING BODY BY AIRBRUSH - #107

  Painting bodies by water-based paints PARMA, under special order.

  4.74 ₤

• ZHB PREPARING BODY TO RACE (CUTTING, STRENGTHENING & INSTALLATION ON THE MODEL) - # 108

  ZHB PREPARING BODY TO RACE (CUTTING, STRENGTHENING & INSTALLATION ON THE MODEL) - # 108

  3.95 ₤

• 

  ZHB STAND SLOTLAB #TCS_Alpaha FOR STORAGE WHEELS BOTTLES Ø23.5 mm (JK, Alpha), W/12 BOTTLES, 88 х 117 mm, acrylic

  STAND SLOTLAB #TCS_Alpaha FOR STORAGE WHEELS BOTTLES Ø23.5 mm (JK, Alpha), W/12 BOTTLES, 88 х 117 mm, acrylic

  PARAMETERS

  • Dia. of wheels bottles, mm: 23,5 (JK, Alpha)
  • Quantity of holes for bottles, pcs: 12
  • Quantity of bottles, pcs: 12
  • Size, mm: 88x17
  • Material: acrylic

  
  

  12.64 ₤

• 

  ZHB SET OF 2 AIRBRUSHES & PARTS TO THEM

  SET OF 2 AIRBRUSHES & PARTS TO THEM

  Use this airbrushes with high quality paints, you can paint your bodies at home & win beauty contest:)

  43.45 ₤

• 

  ZHB CONDUCTOR FOR SET THE MOTOR ON F1, motor shaft 2 mm, rear axle 3/32" - DB#200-3/32-2

  CONDUCTOR FOR SET THE MOTOR ON F1, motor shaft 2 mm, rear axle 2 mm - DB#200-2-2

  Convenient tool for accurate and fast installation of the motor on F1: fixes the center of the motor shaft and the axis of the rear wheels in the same plane, after which the motor is soldered.

  
  

  3.95 ₤

• 

  ZHB CONDUCTOR FOR SET THE MOTOR ON F1, motor shaft 1,5 mm, rear axle 2,36 mm - DB#200-st-1.5

  CONDUCTOR FOR SET THE MOTOR ON F1, motor shaft 1,5 mm, rear axle 2,36 mm - DB#200-st-1.5

  Convenient tool for accurate and fast installation of the motor on F1: fixes the center of the motor shaft and the axis of the rear wheels in the same plane, after which the motor is soldered.

  
  

  3.95 ₤

• 

  ZHB GLUING SERVICE GEARS ON AXIE & MACHINING HUBS - #109

  More & more sportsmen use gears glued on axle. It's connected with decrease imbalance, caused clamping of the screw and possibility use rims without offset of the hub in ES-32

  Just let us know what gears and axle you need - and we will be work for you! 

  3.95 ₤

• 

  ZHB Spray unit per bottle for the tire traction

  Spray unit per bottle for the tire traction

  0.40 ₤

• 

  ZHB AXLE Ballbearing 3 х 9 х 3 mm, flanged shielded, 7 balls, pair - #3x9x3F

  AXLE Ballbearing 3 х 9 х 3 mm, flanged shielded, 7 balls, pair - #3x9x3F

  0.85 ₤

• 

  ZHB Ballbearing 1/8" х 1/4" х 7/64" (3.15 x 6.35 x 2.78 mm), shielded, 7 balls, pair - #1/8х1/4

  Ballbearing 1/8" х 1/4" х 7/64" (3.15 x 6.35 x 2.78 mm), shielded, 7 balls, pair

  2.77 ₤

• ZHB PRODUCTION 1/24 MODEL KIT IN THE MINIMUM CONFIGURATION

  This is a kit of the production model 1/24 in the simplest configuration: Champion chassis, 64 pitch, clips, Lexan body, Proslot X12 motor with a cheap armature (PS3000 motor, good for a beginner, costs only $ 33, then in this setup it will be possible to install any other armature.).

  63.75 ₤

• ZHB PRODUCTION 1/24 MODEL KIT IN THE MAXIMUM CONFIGURATION

  This is a kit of the production model 1/24 in the maximum configuration: the JK two-piece chassis, 72 pitch, motor: setup + matched magnets of the 12th group + KOFORD armature + ballbearings + multi-coil springs + washers, tubing instead of clips, lexan body.

  146.15 ₤

• ZHB Making a metric thread M5 on the guide - #111

  ZHB Making a metric thread M5 on the guide - #111

  This is a thread for guide nuts Cahoza

  0.40 ₤

• ZHB Making a imperial thread 10-32 on the guide - #112

  ZHB Making a imperial thread 0-80 on the guide - #112

  This is a thread for guide nuts JK & Koford

  0.40 ₤

• 

  ZHB Custom made wheels, regular donuts, any rims, handmade, super quality, 3M tire glue, screw w/hollow

  ZHB Custom made wheels, regular donuts, any rims, handmade, super quality, 3M tire glue, screw w/hollow

  10.27 ₤

• 

  ZHB Custom made wheels, primo donuts, any rims, handmade, super quality, 3M tire glue, screw w/hollow

  ZHB Custom made wheels, primo donuts, any rims, handmade, super quality, 3M tire glue, screw w/hollow

  12.64 ₤

• JK 80 PITCH 44T, 0° angle, 3/32" axle, Ø14.6mm glued on 3/32" axle ProSlot - ZHB#215

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  9.48 ₤

• 

  S&K 80 PITCH 45T, 0° angle, 3/32" axle, Ø14.9 mm glued on 3/32" axle ProSlot - ZHB#216

  The hub is machined to a diameter 3.5 mm

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  9.48 ₤

• JK 80 PITCH 45T, 0° angle, 3/32" axle, Ø14.9 mm glued on 3/32" axle ProSlot - ZHB#217

  The hub is machined to a diameter 3.5 mm

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  9.48 ₤

• ZHB GEAR HORKY 80 PITCH 45T, 0° angle, 3/32" axle, Ø14.9 mm glued on 3/32" axle ProSlot - ZHB#218

  The hub is machined to a diameter 3.5 mm

  You can order gluing any gear on any axle. Price for gluing & machining - $2.5 (ZHB#109)

  9.48 ₤

• 

  HORKY BIG HUB 80 PITCH, 45T, 0° angle, 3/32" axle, Ø14.9 mm glued on 3/32" axle ProSlot - ZHB#219

  The hub is machined to a diameter 3.5 mm

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  9.48 ₤

• ZHB GEAR JK 80 PITCH, 45T, 0° angle, 2mm axle, Ø14.9 mm glued on 2 mm axle KOFORD - ZHB#209

  The hub is not cut width, but machined to a diameter 3 mm.

  This gear for ES32 if you use offset rims in gears side or for ES24.

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  9.48 ₤

• 

  CAHOZA 80 PITCH, 45T, 0° angle, 3/32" axle, Ø14.9 mm glued on 3/32" axle CAHOZA - ZHB#227

  The hub is machined to a diameter 3.5 mm

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  
  

  9.48 ₤

• 

  ZHB "TEAPOT" 1/24 KIT - # K035

  ZHB "TEAPOT" 1/24 KIT  - # K035

  Kit with cut on half depth of chassis details, PROSLOT SpeedFX S16D motor, collapsible rear bridge with ballbearings, 64 pitch gears (64 pitch motor pinion, steel, 8T), KrickKr red tires, unpainted Subaru Lexan body

  43.92 ₤

• 

  ZHB PRODUCTION RTR MODEL (model class & configuration under special order)

  My assembly. Models in the assembly will cost from $59 to $185. Depending on the class and configuration.

     The photos of my models are posted. New models will look more beautiful!

     The average price of the model is indicated.

  
  

  94.80 ₤

• 

  ZHB ISRA-CLASSES RTR MODEL (model class & configuration under special order)

  My assembly. Models in the assembly will cost from $300 to $500 and more.... Depending on the configuration. Those. It can be chassis DUBICK, HORKY or CASTRICONE, And motors: setups: ZHB, VALIKO, VOKI, CAHOZA, HORKY or Machkoza, with different armatures.

  Delivery of any configurations is possible !!! The average price of the model is indicated.

  316.00 ₤

• 

  ZHB BRAKE RHEOSTAT 4,7 OHM

  It is wound by plane nichrom. Used in controllers made by Nesterenko A.I. But, it can work with any electonic controller

  9.48 ₤

• 

  ZHB "Banana" connector for controller, 1 pc.

  "Banana" connector for controller, 1 pc.

  1.19 ₤