KOFORD
-
KOFORD STANDART PROFILE GRAPHITE GUIDE, THREADED - #M273
Precision threaded graphite guide with lead wire slots.
On each one guide there is an inscription «STARBURST»
-
KOFORD STEEL PIN TUBING, lenght 80 mm, 1 pc. - #M259
Precut spring temper stainless steel pin tubing, fits full width of car.
-
KOFORD T-SHIRT, SIZE- L - #240L
KOFORD T-SHIRT, SIZE- L
A fine T-shirt made from cotton! It does not stretch, even after a lot of washing.
-
KOFORD T-SHIRT, SIZE- M - #240M
KOFORD T-SHIRT, SIZE- M
A fine T-shirt made from cotton! It does not stretch, even after a lot of washing.
-
KOFORD T-SHIRT, SIZE- S - #240S
KOFORD T-SHIRT, SIZE- S
A fine T-shirt made from cotton! It does not stretch, even after a lot of washing.
-
KOFORD T-SHIRT, SIZE- XL - #240XL
KOFORD T-SHIRT, SIZE- XL
A fine T-shirt made from cotton! It does not stretch, even after a lot of washing.
-
KOFORD T-SHIRT, SIZE- XXL - #M204-XXL
KOFORD T-SHIRT, SIZE- XXL
A fine T-shirt made from cotton! It does not stretch, even after a lot of washing.
-
KOFORD T-SHIRT, SIZE- XXXL - #M204-XXXL
KOFORD T-SHIRT, SIZE- XXXL
A fine T-shirt made from cotton! It does not stretch, even after a lot of washing.
-
KOFORD Teflon® spring insulation, 30 cm - #M267
KOFORD Teflon® spring insulation, 30 cm - #M267
Teflon® spring insulation, perfect fit on springs
-
KOFORD THREAD RETAINING COMPOUND, tube -M300
Thread retaining compound used to keep can screws from vibrating loose on aluminum endbells. Prevents endbell damage by allowing can screws to be tightened until only snug
-
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 38 DEG - #468-BOX-38
Tri-Star G12 arm .518 diameter 38° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability
-
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 40 DEG - #468-BOX-40
Tri-Star G12 arm .518 diameter 40° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability
-
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 42 DEG - #468-BOX-42
Tri-Star G12 arm .518 diameter 42° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability
-
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 44 DEG - #468-BOX-44
Tri-Star G12 arm .518 diameter 44° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability
-
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 45 DEG - #468-BOX-45
Tri-Star G12 arm .518 diameter 45° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability
-
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 46 DEG - #468-BOX-46
Tri-Star G12 arm .518 diameter 46° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability
-
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 47 DEG - #468-BOX-47
Tri-Star G12 arm .518 diameter 47° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability
-
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 48 DEG - #468-BOX-48
Tri-Star G12 arm .518 diameter 48° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability
-
KOFORD Tri-Star dia. .518" Handwound X-12 ARM 48 deg. - #M468-H12
KOFORD Tri-Star dia. .518" Handwound X-12 ARM 48 deg. - #M468-H12
Hand wound on the Koford Tri Star blank for the ultimate in performance. Features reduced winding resistance and weight. Super hard shaft for long armature life.
-
KOFORD Tri-Star dia. .518" Handwound X-12 ARM 45 deg. - #M468-H12
KOFORD Tri-Star dia. .518" Handwound X-12 ARM 45 deg. - #M468-H12
Hand wound on the Koford Tri Star blank for the ultimate in performance. Features reduced winding resistance and weight. Super hard shaft for long armature life.
-
KOFORD Ultra G12 blueprinted motor with shunts and can ball bearing - #M527B
KOFORD Ultra G12 blueprinted motor with shunts and can ball bearing - #M527B
Lightweight can and .450 long magnets. Motor is blueprinted and assembled by Koford craftsmen with premium brushes and fully broken in.
-
KOFORD Ultra precision axle Ø3/32" (2.36 mm), length 53 mm, 1 pc - #M623S
KOFORD Ultra precision axle Ø3/32" (2.36 mm), length 53 mm, 1 pc - #M623S
Unplated 3/32 axles for those who wish to flat their own. Superior rust resistance to other unplated axles. These axles have a super hard low friction coating which will not rust. They feature extra tight diameter tolerances to prevent play between axle and bearings as well as exceptional straightness. They are made from a special tool steel with twice the strength of drill blank axles.
-
KOFORD Ultra precision axle Ø3/32" (2.36 mm), length 53 mm, bulk pack of 100 pcs. - #M623H
KOFORD Ultra precision axle Ø3/32" (2.36 mm), length 53 mm, bulk pack of 100 pcs. - #M623H
Bulk pack of 100 3/32 ultra precision unplated axles. Esceptional tolerances and strength.
-
KOFORD Ultra precision axle Ø3/32" (2.36 mm), length 53 mm, 1 cd. (6 pcs.) - #M623R
KOFORD Ultra precision axle Ø3/32" (2.36 mm), length 53 mm, 1 cd. (6 pcs.) - #M623R
Unplated 3/32 axles for those who wish to flat their own. Superior rust resistance to other unplated axles. These axles have a super hard low friction coating which will not rust.