JK Products
-
JK 4" CHEETAH X25 CENTER SECTION 0.9MM - #C25C
JK 4" CHEETAH X25 CENTER SECTION 0.9MM - #C25C
.9mm thick replacement center section for the JKP 4" CHEETAH X25 KIT 0.9MM THICK chassis for PRODUCTION 1/24- #JKPX25
Old catalog #JKX25C
-
JK 4" cheetah Aeolos center section - #C26C
JK 4" cheetah Aeolos center section - #C26C
-
JK 4" Cheetah Aeolos 1 piece pan - #C26P
JK 4" Cheetah Aeolos 1 piece pan - #C26P
-
JK .050" allen wrench w/guide tool 3/8" (9.5 mm), 4.5" long reach 2mm shaft, blue - #L70
JK .050" allen wrench w/guide tool 3/8" (9.5 mm), 4.5" long reach 2mm shaft, blue - #L70
Tire & Gear Wrench w 3/8" Guide Tool, 4.5" long reach 2mm Shaft, 0.050" Precision Tolerance Tip HRC Hardened
-
JK Direct drive motor for C10 1/32 direct drive chassis - NEW VERSION - #M21
JK Direct drive motor for C10 1/32 direct drive chassis - NEW VERSION - #M21
* NEW VERSION * Direct Drive Motor for C10 1/32 Direct Drive Chassis, *** COMPUTER BALANCED ***
Old catalog #JKH-DD
-
JK 3/32" (2.36 mm), .010" (0.254 mm) thick, stainless steel axle spacers, pack of 100 pcs. - #U72-100
JK 3/32" (2.36 mm), .010" (0.254 mm) thick, stainless steel axle spacers, pack of 100 pcs. - #U72-100
-
JK Hawk 7 Motor *** COMPUTER BALANCED *** with Dual Ball Bearings - #M7BB
JK Hawk 7 Motor *** COMPUTER BALANCED *** with Dual Ball Bearings - #M7BB
Old catalog #JK30307BB
-
JK Hawk 6 Motor, *** Balanced *** - #M6
JK Hawk 6 Motor, *** Balanced *** - #M6
Old catalog #JK30306
-
JK Hawk 11 extreme performance drag motor - #M11
Hawk 11 Precision Balanced Extreme Performance Motor, FK Sized, recommended for drag use only.
-
JK Donut wizard mounting tool - #L19
JK Donut wizard mounting tool - #L19
Makes fitting of donuts easy.
Suitable for all 3/32" axle hubs / rims.
The wizard comes with 5 cones to suit most wheel sizes 8mm to 15mm
Manufactured from strong sturdy Nylon & Delrin with a hard steel 3/32" axleOld catalog #JK8075
-
JK REPLACEMENT ENDBELL FOR HAWK #M3 (#M6), ALUMINIUM - #M3EA (#M6EA)
JK REPLACEMENT ENDBELL FOR HAWK #M3 (#M6), ALUMINIUM - #M3EA (#M6EA)
New improved - Upgraded Aluminum endbell for JK Hawk #M3 motors
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
Old catalog #JK30303AL
-
JK Heavy Duty Pinion Gear Puller - #L23
JK Heavy Duty Pinion Gear Puller - #L23
DELUXE GEAR PULLER has tighter pin and is harder than the previous version. Made from tool steel.
Old catalog #JK8062
-
JK Pinion 64 pitch, 10T , 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear (6 ea) - #P610-6
JK Pinion 64 pitch, 10T , 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear (6 ea) - #P610-6
This is press-on style pinion gear
Old catalog #JK440010
-
JK Pinion 64 pitch, 11T , 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear (6 ea) - #P611-6
JK Pinion 64 pitch, 11T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear (6 ea)
This is press-on style pinion gear
Old catalog #JK440011
-
JK Pinion 64 pitch, 10T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P610S-6
JK Pinion 64 pitch, 10T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P610S-6
Old catalog #JK450010
-
JK Pinion 64 pitch, 11T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P611S-6
JK Pinion 64 pitch, 11T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P611S-6
Old catalog #JK450011
-
JK Pinion 64 pitch, 12T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P612-6
JK Pinion 64 pitch, 12T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P612-6
Old catalog #JK440012
-
JK Pinion 64 pitch, 10T, 0° angle, Press-on long lasting stainless steel pinion gear narrow (6 ea) - #P610N-6
JK Pinion 64 pitch, 10T, 0° angle, Press-on long lasting stainless steel pinion gear narrow (6 ea) - #P610N-6
This is press-on style pinion gear
Old catalog #JK440010S
-
JK Pinion 64 pitch, 10T, 0° angle, Press-on long lasting stainless steel pinion gear narrow, 1 pc. - #P610N
JK Pinion 64 pitch, 10T, 0° angle, Press-on long lasting stainless steel pinion gear narrow, 1 pc. - #P610N
This is press-on style pinion gear
Old catalog #JK440010S
-
JK 1/32 Cheetah 11 Chassis Two-Piece Pan for PRODUCTION 1/32 - #C1
JKPHC1132 - 1/32 Cheetah 11 / 3 piece chassis design for Production 1/32. Sheet of lead in a gift! - #C1
Old catalog #HC1132
-
JK 1/32 F1 cheetah 11 chassis kit - #C62
JK 1/32 F1 cheetah 11 chassis kit
A beautiful alternative for club races
Designed for HAWK motor, but it is possible to install any motor that falls under the arm :)
Old catalog #JK25141
-
JK 1/32 Direct Drive Chassis Kit - #C10
JK 1/32 Direct Drive Chassis Kit - #C10
Old catalog #JK32DD
-
JK Lane Stickers, (200 Sheets) - #S1-200
JK Lane Stickers, (200 Sheets) - #S1-200
LANE STICKERS - 200SHEETS W/LANE# AND CHANGE INFO
Old catalog #JK150B
-
JK 1/32 Cheetah 11 Chassis w 1-Piece Pan, Kit, for PRODUCTION 1/32 - #C5
Special order!
JKPX321 - 1/32 CHEETAH 11 CHASSIS WITH 1 PAN, 2 piece chassis, for Production 1/32 - #C5
Old catalog #JKX321