JK Products
-
JK Pinion 64 pitch, 14T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P614
JK Pinion 64 pitch, 14T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P614
-
JK J-bar accessory pack for C26 aeolos chassis (0.8mm, 0.9mm. 1.0mm, 1.1mm, 1.2mm, 1.3mm, 1.2mm, 1.3mm - #C26J
JK J-bar accessory pack for C26 aeolos chassis (0.8mm, 0.9mm. 1.0mm, 1.1mm, 1.2mm, 1.3mm, 1.2mm, 1.3mm - #C26J
Part number is JKC26J and the price is $4.95 for a pack of 6 bars: 0.031" = 0.8mm 0.035" = 0.9mm (stock front) 0.039" = 1.0mm 0.043" = 1.1mm.
Old catalog #C43J
-
JK AXLE Ballbearing 3/16" х 3/32" (4.76 х 2.36 mm) flanged shielded, 5 balls, pair - #U70
JK AXLE Ballbearing 3/16" х 3/32" (4.76 х 2.36 mm) flanged shielded, 5 balls, pair - #U70
-
JK Pinion 64 pitch, 15T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P615
JK Pinion 64 pitch, 15T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P615
-
JK Pinion 64 pitch, 15T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P615S
JK Pinion 64 pitch, 15T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P615S
-
JK Armature for HAWK #M3 motor - #M3A
JK Armature for HAWK #M3 motor - #M3A
Basic HAWK motor armature. It can be used in Proslot EURO MK motors
Old catalog #JK30302
-
JK Pinion gear puller T-Handle - #L17
JK Pinion gear puller T-Handle - #L17
Old catalog #JK8063
-
JK GM SUPER TRUCK-Caterpillar body, Lexan, thickness .01" (0.25 mm) - #B141B
GM SUPER TRUCK-Caterpillar body
- Made from: Polycarbonate (Lexan)
- For: GM (Truck)
- Thickness: .01" (0.25 mm)
Old catalog #JK7403B
-
JK GM SUPER TRUCK-TATRA BODY, Lexan, thickness .01" (0.25 mm) - #B140B
GM 1/24 SUPER TRUCK-TATRA Body - #B140B
- Made from: Polycarbonate (Lexan)
- For: GM (Truck)
- Thickness: .01" (0.25 mm)
Old catalog #JK7402B
-
JK Stock car numbers, orange - #S6
JK Stock car numbers, orange - #S6
Old catalog #JK20031O
-
JK Stock car numbers, red - #S7
JK Stock car numbers, red - #S7
Old catalog #JK20031R
-
JK Clear body 4" Audi RSC 99, Lexan .005" (0,125 mm) - #B86X
JK Clear body 4" Audi RSC 99 - #B86X
- Made from: Polycarbonate (Lexan)
- For: 4"
- Thickness: .005" (0.125 mm)
- Clear body
Old catalog #JK7182
-
JK CONTROLLER TRIGGER - #N9
JK CONTROLLER TRIGGER - #N9
Controller trigger, Updated
Old catalog #JK8083
-
JK NEODYMIUM MAGNETS FOR HAWK MOTOR - #M3M (#M6M)
JK NEODYMIUM MAGNETS FOR HAWK MOTOR - #M3M (#M6M)
NEODYMIUM REPLACEMENT MAGNETS FOR HAWK 3030 MOTOR (more powerful than stock)
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
-
JK Precision machined 6 hole guide nut, PRO-version, 6 pc. Use with the JK#L30 guide nut tool. - #U61-6
JK Precision machined 6 hole guide nut, PRO-version. Use with the JK#L30 guide nut tool - #U61
-
JK Repleacement tip for L70 wrench, long Reach 4.5" (120 mm) long 2mm Shaft, 0.050" - #L71
JK Repleacement tip for L70 wrench, long Reach 4.5" (120 mm) long 2mm Shaft, 0.050" - #L71
Precision Tolerance Allen Tip, Fits L10 and L15 handles
-
JK BRASS PIN TUBING, lenght 10.8 mm, 24 psc. in pocket - #U50-12
JK BRASS PIN TUBING, lenght 10.8 mm, 24 psc. in pocket - #U50-12
Old catalog #JK9171
-
JK Hawk Retro Motor *** COMPUTER BALANCED *** - #M8
JK Hawk Retro Motor *** COMPUTER BALANCED *** - #M8
JK Hawk Retro Motor, copper brush tab for better conductivity, Same wind and performance as Falcon 7
Old catalog #JKHR
-
JK Lead wire 20Ga (section 0,52 mm²), purple, 3 m (10 ft) - #U68-10
JK Lead wire 20Ga (section 0,52 mm²), purple, 3 m (10 ft) - #U68-10
Racing Lead Wire, 20AWG Ultra-Fine 0.05mm, Lightweight (10 ft)
-
JK 3/32" x 3/16" (2.36 mm x 4.76 mm) bushings in production chassis, 1 cd. (6 pairs) - #U26
JK bushings in production chassis, 1 cd. (6 pairs)
- Outer Diameter: 3/16″ (4.76 mm);
- Inner Diameter: 3/32″ (2.36 mm).
- Old catalog #JK5574
-
JK Body Guide Cutting Tool - #L80
JK Body Guide Cutting Tool - #L80
Professional tool for easy & smooth cutting of the body
-
JK Controller Frame, Anodized Aluminum Black - #N20
JK Controller Frame, Anodized Aluminum Black - #N20
Old catalog #JK80812
-
JKP Otoscope - Illuminated Commutator Inspection Tool - #L33
Otoscope - Illuminated Commutator Inspection Tool - Not For Medical Use -