DUBICK Engineering
-
DUBICK Set #2 of 2 mm inside diameter aluminium tubes (1 mm (.04"), 1.5 mm (.059"), 2 mm (.079"), 2.5 mm (.098")) - #713
DUBICK Set #2 of 2 mm inside diameter aluminium tubes (1 mm (.04"), 1.5 mm (.059"), 2 mm (.079"), 2.5 mm (.098")) - #713
In set 2 pc of each size: 1 mm (.04"), 1.5 mm (.059"), 2 mm (.079"), 2.5 mm (.098").
-
DUBICK STAND FOR STORAGE WHEELS BOTTLES Ø23.5 mm (JK, Alpha), 88 х 117 mm, acrylic- #DB203-23
DUBICK STAND FOR STORAGE WHEELS BOTTLES Ø23.5 mm (JK, Alpha), 88 х 117 mm, acrylic- #DB203-23
PARAMETERS
- Dia. of wheels bottles, mm: 23,5 (JK, Alpha)
- Quantity of holes for bottles, pcs: 12
- Size, mm: 88x17
- Material: acrylic
-
DUBICK PINION 48 PITCH, 11T, 0° angle 2 mm bore, BRASS (This is press-on style pinion gear) - #DB501-11
DUBICK PINION 48 PITCH, 11T, 0° angle 2 mm bore, BRASS
This is press-on style pinion gear
-
DUBICK STAND FOR STORAGE WHEELS BOTTLES Ø27 mm (PSE, Alpha Large), 103 x 137 mm, acrylic - #DB203-27
DUBICK STAND FOR STORAGE WHEELS BOTTLES Ø27 mm (PSE, Alpha Large), 103 x 137 mm, acrylic - #DB203-27
PARAMETERS
- Dia. of wheels bottles, mm: 27 (PSE, Alpha Large)
- Quantity of holes for bottles, pcs: 12
- Size, mm: 103x137
- Material: acrylic
-
DUBICK Diamond motor brush tool (for shunting) - #766
DUBICK Diamond motor brush tool (for shunting) - #766
-
DUBICK MG TOOL FOR PREPARING MOTOR BRUSHES W/DIAMOND WHEEL- #DB201
A tool that every modelist needs! With it's help quickly and accurately prepare motor brushes for any motors! Comes with a diamond wheel
Tool for motor brushes (horizontal or vertical). A more advanced design of the turtle. includes anodised knurled grip and diamond coated brush radius tool diameter 5,2 mm (.208")
-
DUBICK F1 motor adjustment tool for crowns gears with 2 mm axle, 1.5 mm motor shaft and 0.2 mm offset - #DB711
DUBICK F1 motor adjustment tool for crowns gears with 2 mm axle, 1.5 mm motor shaft and 0.2 mm offset - #DB711
Special for 5 and 6 teeth 72 pitch pinions. 0.2 mm offset allow instal down F1 motor for more low center of gravity, but not so dangerous like 0.5 mm offset.
-
DUBICK Engineering F1 motor adjustment tool for crowns gears with 3/32" (2.36 mm) axle, 1.5 mm motor shaft and 0.2 mm offset
DUBICK Engineering F1 motor adjustment tool for crowns gears with 3/32" (2.36 mm) axle, 1.5 mm motor shaft and 0.2 mm offset
Special for 5 and 6 teeth 72 pitch pinions. 0.2 mm offset allow instal down F1 motor for more low center of gravity, but not so dangerous like 0.5 mm offset.
-
DUBICK .050" Aluminium allen wrench w/guide tool 3/8" (9,5 mm), anodized - #DB604
DUBICK .050" Aluminium allen wrench w/guide tool 3/8" (9,5 mm), anodized - #DB604
-
-
DUBICK 3M REINFORCED STRAPPING TAPE, 12 mm x 50 m - #DB2073
3m Reinforced strapping tape, 12mm x 50m
The original American 3M. Reinforced with nylon tape. The best material for reinforcing and repairing polycarbonate and plastic models bodies.
-
DUBICK 3M REINFORCED STRAPPING TAPE, 25 mm x 50 m - #DB2074
3m Reinforced strapping tape, 25mm x 50m
The original American 3M. Reinforced with nylon tape. The best material for reinforcing and repairing polycarbonate and plastic models bodies.
-
DUBICK 3M REINFORCED STRAPPING TAPE, 50 mm x 50 m - #DB2075
3m Reinforced strapping tape, 50mm x 50m
The original American 3M. Reinforced with nylon tape. The best material for reinforcing and repairing polycarbonate and plastic models bodies.
-
DUBICK Axle ballbearing 1/8" x 1/4" (3.15 mm x 6.35 mm), sheilded, flanged, pair - #DE719
DUBICK Axle ballbearing 1/8" x 1/4" (3.15 mm x 6.35 mm), sheilded, flanged, pair - #DE719
-
DUBICK Engineering 2024 ES 1/24 Eurosport chassis assembled without ballbearings - #DBES24
All chassis starting from 2016 will be made of German high-carbon structural steel 1 mm thick. This is the same material that is used the world's leading chassis manufacturers.
-
DUBICK PINION 48 PITCH, 12T, 0° angle 2 mm bore, BRASS (This is press-on style pinion gear) - #DB501-12
DUBICK PINION 48 PITCH, 12T, 0° angle 2 mm bore, BRASS
This is press-on style pinion gear
-
DUBICK PINION 48 PITCH, 13T, 0° angle 2 mm bore, BRASS (This is press-on style pinion gear) - #DB501-13
DUBICK PINION 48 PITCH, 13T, 0° angle 2 mm bore, BRASS
This is press-on style pinion gear
-
DUBICK PINION 48 PITCH, 14T, 0° angle, 3 mm bore, BRASS (This is press-on style pinion gear) - #DB501-14
DUBICK PINION 48 PITCH, 14T, 0° angle, 3 mm bore, BRASS
This is press-on style pinion gear
-
DUBICK PINION 48 PITCH, 15T, 0° angle, BRASS (This is press-on style pinion gear) - #DB501-15
DUBICK PINION 48 PITCH, 15T, 0° angle, BRASS (This is press-on style pinion gear) - #501-15
This is press-on style pinion gear!
-
DUBICK PINION 48 PITCH, 16T, 0° angle, BRASS (This is press-on style pinion gear) - #DB501-16
DUBICK PINION 48 PITCH, 16T, 0° angle, BRASS (This is press-on style pinion gear) - #501-16
This is press-on style pinion gear!
-
DUBICK armature bronze spacers 4.6 mm thick, 2 pcs. - #DB4034
DUBICK armature bronze spacers 4.6 mm thick, 2 pcs. - #DB4034
-
DUBICK 2 mm, .22" (5,5 mm) thick aluminium axle spacer, 1 pc. - #DB712-5.5
DUBICK 2 mm, .22" (5,5 mm) thick aluminium axle spacer, 1 pc. - #DB712-5.5
-
DUBICK 2 mm, .24" (6 mm) thick aluminium axle spacer, 1 pc. - #DB712-6
DUBICK 2 mm, .24" (6 mm) thick aluminium axle spacer, 1 pc. - #DB712-6
-
DUBICK 2 mm, .26" (6,5 mm) thick aluminium axle spacer, 1 pc. - #DB712-6.5
DUBICK 2 mm, .26" (6,5 mm) thick aluminium axle spacer, 1 pc. - #DB712-6.5