DUBICK Engineering
-
DUBICK Set of contacts for the controller. Made from brass and GOLD PLATED - #714
DUBICK set of contacts for the controller. Made from brass and GOLD PLATED.
Fit for Parma, Jk and RedFox controller triggers. Full analog Parma #355D TURBO CONTACTS & TERMINALS and fit for Parma turbo controller frame.
-
DUBICK .01" (0.25 mm) Precision steel guide spacers, 6 pcs. - #DB709
DUBICK .01" (0.25 mm) Precision steel guide spacers, 6 pcs.
-
DUBICK Precut Brass pin tubes, length 11.8 mm, 4 pcs.- #DB4081
DUBICK Precut Brass pin tubes, length 11.8 mm, 4 pcs.- #DB4081
-
DUBICK Precut Brass pin tubes, length 11.8 mm, storage tube (24 pcs.) - #DB409
DUBICK Precut Brass pin tubes, length 11.8 mm, storage tube (24 pcs.) - #DB409
-
DUBICK Desktop organizer for working with small parts 3" x 4 1/2" x .4" (76,2 × 115 × 10 mm). Has a built-in magnet - #DB704
DUBICK Desktop organizer for working with small parts 3" x 4 1/2" x .4" (76,2 × 115 × 10 mm). Has a built-in magnet - #DB704
-
DUBICK TECH BLOCK WITHOUT MAGNETS - #DB2051
DUBICK TECH BLOCK WITHOUT MAGNETS - #DB2051
-
DUBICK gold plated long guide clips. Made special for new RED FOX guides. (But also fit for all other guides), 1 pair - #DB702
DUBICK gold plated long guide clips. Made special for new RED FOX guides. (But also fit for all other guides), 1 pair
-
DUBICK gold plated guide clips with crimping for wires. Made for new RED FOX guides.(Fit for all other guides), 1 pair - #DB703
DUBICK gold plated guide clips with crimping for wires. Made for new RED FOX guides.(Fit for all other guides), 1 pair
-
DUBICK Engineering 2024 F1-32 chassis assembled without ballbearings - #DBF1
All chassis starting from 2016 will be made of German high-carbon structural steel 1 mm thick. This is the same material that is used the world's leading chassis manufacturers.
The chassis comes with a front wheels
-
DUBICK 0- 15V, 17A Power Supply. 110V or 220V. Weight 750 gr. Dimensions: 122 x 70 x 208 mm.
We are happy present our new Power Supply!
It is two power supply in one!
- In the kit there is an additional block adapter on 10 Volts and 10 Amperes, for simultaneous work with several engines or tools
- ability to accurately adjust the current and voltage.
- The range of voltage adjustment is from 0 to 15 Volts and current from 0 to 17 Amps.
- Accuracy of adjustment to 0.01 both voltage and current.
- Ability to work from 110 and 220 Volts.
- The unit can be controlled via Bluetooth.
- There is also a USB Charger with a maximum current of up to 3 Amps.
- Connection of a soldering iron is possible (possible order extra solder iron like on picture)
- Crocodile wires are included.
- The weight of the entire set of 960 grams.
- Dimensions: 122 x 70 x 208 mm. -
DUBICK DIAMOND COMMUTATOR CUTTING TOOL for arms with cup - #DB213
DUBICK DIAMOND COMMUTATOR CUTTING TOOL for arms with cup - #DB213
-
-
DUBICK 3 coil motor springs, steel, pair - #DB600
DUBICK 3 coil motor springs, steel, pair - #DB600
3 coil springs for group 12 and higher motors. Made from hardened steel - one pair
-
DUBICK Panda 55,000 rpm 12V motor - #DB750
DUBICK Panda 55,000 rpm 12V motor - #DB750
Fast and reliable FK group motor.
55 turns 28 AWG wire
Carbon brushes. Short armature shaft.
-
DUBICK Rear bridge for the chassis "TEAPOT" 1/24 (model width 83 mm, rims width 18 mm, brigde width 43.5 mm)
DUBICK Rear bridge for the chassis "TEAPOT" 1/24 (model width 83 mm, rims width 18 mm, brigde width 43.5 mm)
Suitable for 16 mm gears.
-
DUBICK diamond drum for tire truer BSV, 70 grit (grain diameter 0,315 mm) - #DB718
DUBICK Diamond drum for tire truer BSV, grain 0,3/0 mm
-
DUBICK Diamond drum for HUDY tire truer, 60 grit (grain diametr 0,250 mm) - #751
DUBICK Diamond drum for HUDY tire truer, 60 grit (grain diametr 0,250 mm) - #751
-
DUBICK Ballbearing 2 х 5 х 2,3 mm flanged, shielded, 7 balls, pair - #DB608
DUBICK Ballbearing 2 х 5 х 2,3 mm flanged, shielded, 7 balls, pair - #DB608
-
DUBICK Pinion 64 pitch, 9T , 0° angle, 2 mm bore, brass (This is press-on style pinion gear) - #DB502-9
Pinion 64 pitch, 9T , 0° angle, 2 mm bore, brass
This is press-on style pinion gear
-
DUBICK Precision Ballbearing 2 х 5 х 2.3 mm, flanged, shielded - #DB607
DUBICK Precision Ballbearing 2 х 5 х 2.3 mm, flanged, shielded - #DB607
-
DUBICK Rear bridge for the chassis "SUPER-TEAPOT" 1/24 (w/hole to the motor)
DUBICK Rear bridge for the chassis "SUPER-TEAPOT" 1/24 (w/hole to the motor)
-
DUBICK Universal kit for assembling body mounting unit of the "Teapot 1/32" & "Teapot 1/24" models. Includes 4 pre-cut tubes. Suitable for JK clips #9008 or #9010
DUBICK Universal kit for assembling body mounting unit of the "Teapot 1/32" & "Teapot 1/24" models. Includes 4 pre-cut tubes. Suitable for JK clips #9008 or #9010
-
DUBICK Kit for assembly mini-slot car box "Sportsman Working Place" for childrens
DUBICK Kit for assembly mini-slot car box "Sportsman Working Place" for childrens
Parameters:
- Length, mm: 350 (+/- 10-20 mm);
- Width, mm: 210 (+/- 10-20 mm);
- Height, mm: 200 (+/- 10-20 mm);
- + handle for carrying.
-
DUBICK Pinion 64 pitch, 10T , 0° angle, 2 mm bore, brass (This is press-on style pinion gear) - #DB502-10
Pinion 64 pitch, 10T , 0° angle, 2 mm bore, brass
This is press-on style pinion gear!