DUBICK Engineering
-
DUBICK Rear bridge for the chassis "TEAPOT" 1/24 (model width 83 mm, rims width 18 mm, brigde width 43.5 mm)
DUBICK Rear bridge for the chassis "TEAPOT" 1/24 (model width 83 mm, rims width 18 mm, brigde width 43.5 mm)
Suitable for 16 mm gears.
-
DUBICK Duralumin guide nut metric thread for 9 mm (.354") wrench, 0.3 grams weight - #769
DUBICK Duralumin guide nut metric thread for 9 mm (.354") wrench, 0.3 grams weight - #769
-
DUBICK diamond drum for tire truer BSV, 70 grit (grain diameter 0,315 mm) - #718
DUBICK Diamond drum for tire truer BSV, grain 0,3/0 mm
-
DUBICK Diamond drum for HUDY tire truer, 60 grit (grain diametr 0,250 mm) - #751
DUBICK Diamond drum for HUDY tire truer, 60 grit (grain diametr 0,250 mm) - #751
-
DUBICK LEXAN (POLYCARBONATE) FOR BODY REINFORCEMENT, w/3M sticky layer, thickness .007" (0.175 mm), size 1.968" x 7.087" (50 x 180 mm) - #2071
Lexan for body reinforcement
Parameters
- Thickness: .007" (0.175 mm)
- Size: 1.968" x 7.087" (50 x 180 mm)
- w/3M sticky layer
-
DUBICK Ballbearing 2 х 5 х 2,3 mm flanged, shielded, 7 balls, pair - #608
DUBICK Ballbearing 2 х 5 х 2,3 mm flanged, shielded, 7 balls, pair - #608
-
DUBICK Pinion 64 pitch, 9T , 0° angle, 2 mm bore, brass (This is press-on style pinion gear) - #502-9
Pinion 64 pitch, 9T , 0° angle, 2 mm bore, brass
This is press-on style pinion gear
-
DUBICK Precision Ballbearing 2 х 5 х 2.3 mm, flanged, shielded - #607
DUBICK Precision Ballbearing 2 х 5 х 2.3 mm, flanged, shielded - #607
-
DUBUCK Precision Ballbearing 2 х 5 х 2.5 mm, unshielded - #605
Ballbearing 2 х 5 х 2.5 mm, unflanged - #605
-
DUBICK Precision Ballbearing 2 х 6 х 2,3 mm, unflanged - #606
DUBICK Precision Ballbearing 2 х 6 х 2,3 mm, unflanged - #606
-
DUBICK Rear bridge for the chassis "SUPER-TEAPOT" 1/24 (w/hole to the motor)
DUBICK Rear bridge for the chassis "SUPER-TEAPOT" 1/24 (w/hole to the motor)
-
DUBICK Universal kit for assembling body mounting unit of the "Teapot 1/32" & "Teapot 1/24" models. Includes 4 pre-cut tubes. Suitable for JK clips #9008 or #9010
DUBICK Universal kit for assembling body mounting unit of the "Teapot 1/32" & "Teapot 1/24" models. Includes 4 pre-cut tubes. Suitable for JK clips #9008 or #9010
-
DUBICK Kit for assembly mini-slot car box "Sportsman Working Place" for childrens
DUBICK Kit for assembly mini-slot car box "Sportsman Working Place" for childrens
Parameters:
- Length, mm: 350 (+/- 10-20 mm);
- Width, mm: 210 (+/- 10-20 mm);
- Height, mm: 200 (+/- 10-20 mm);
- + handle for carrying.
-
DUBICK Pinion 64 pitch, 10T , 0° angle, 2 mm bore, brass (This is press-on style pinion gear) - #502-10
Pinion 64 pitch, 10T , 0° angle, 2 mm bore, brass
This is press-on style pinion gear!
-
DUBICK LEXAN (POLYCARBONATE) FOR BODY REINFORCEMENT, w/3M sticky layer, thickness .010" (0.25 mm), size 1.968" x 7.087" (50 x 180 mm) - #2072
Lexan for body reinforcement
Parameters
- Thickness: .010" (0.25 mm)
- Size: 1.968" x 7.087" (50 x 180 mm)
- w/3M sticky layer
-
DUBICK Lexan (polycarbonate) for body reinforcement, w/3M sticky layer, thickness .015" (0.38 mm), size 1.968" x 7.087" (50 x 180 mm) - #2072-1
Lexan for body reinforcement
Parameters
- Thickness: .015" (0.38 mm)
- Size: 1.968" x 7.087" (50 x 180 mm)
- w/3M sticky layer
-
DUBICK Diamond tire file (w/big & small grain of diamond) - #767
DUBICK Diamond tire file (w/big & small grain of diamond) - #767
-
DUBICK PINION GEAR 48 PITCH, 9T, 2 mm bore, BRASS (This is press-on style pinion gear) - #501-9
DUBICK PINION GEAR 48 PITCH, 9T, 2 mm bore, BRASS
This is press-on style pinion gear
-
DUBICK AXLE Ballbearing 3/32" х 3/16" х 3/32" (2.36 х 4.76 х 2.36 mm) flanged shielded, 7 balls, pair - #609
DUBICK AXLE Ballbearing 3/32" х 3/16" х 3/32" (2.36 х 4.76 х 2.36 mm) flanged shielded, 7 balls, pair - #609
Flanged ballbearings for rear bridge
-
DUBICK Controller spring - #724
DUBICK Controller spring - #724
-
DUBICK PINION GEAR 48 PITCH, 10T, 2 mm bore, BRASS (This is press-on style pinion gear) - #501-10
DUBICK PINION GEAR 48 PITCH, 10T, 2 mm bore, BRASS
This is press-on style pinion gear
-
DUBICK Front wheels for F1/32 chassis, Ø14,5 mm, pair
DUBICK Front wheels for F1/32 chassis, Ø14,5 mm, pair
Full S&K and Horky analogue. Super strong front wheels.
-
Dubick Diamond brush radius tool dia. 188" (4.77 mm) - #768-188
Dubick Diamond brush radius tool dia. 188" (4.77 mm) - #768-188
-
Dubick Diamond brush radius tool dia. 193" (4.90 mm) - #768-193
Dubick Diamond brush radius tool dia. 193" (4.90 mm) - #768-193
