CAHOZA
-
CAHOZA GOLD PLATED HORIZONTAL HARDWARE FOR F1/32 - #CAH108
CAHOZA GOLD PLATED HORIZONTAL HARDWARE FOR F1/32
NEW aluminium gold plated horizontal hardware, high precision.
-
CAHOZA GEAR 80 PITCH 44T, 0° angle, 2 mm axle, Ø14.56 mm glued on 2 mm axle - CAHOZA
The hub is cut to a width 3.8 mm & machined to a diameter 3.5 mm
CAHOZA gluing gears for Vladimir Horky. They're very strongly glued, therefore it's more reliable
You can order gluing any gear on any axle. Price for gluing & machining - $3,5
-
CAHOZA Magnet gluing tool - dia. 531" - #68-531
CAHOZA Magnet gluing tool - dia. 531" - #68-531
stainless steel slug with smooth finish (CNC machined) with knurled aluminium nut. Used for precise gluing of not honed Tornado magnets into Cahoza C-cans. Diameter .531" (13.48 mm).
-
CAHOZA Magnet gluing tool - dia. 538" - #68-538
CAHOZA Magnet gluing tool - dia. 538" - #68-538
stainless steel slug with smooth finish (CNC machined) with knurled aluminium nut. Used for regluing of Tornado magnets into Cahoza C-cans. Diameter .538" (13.66 mm).
-
CAHOZA 3 COIL SPRINGS STAINLESS STEEL, pair - #254
3 COIL SPRINGS
Cahoza springs for G12, Cobalt 12, INT15 motors, made from stainless steel, resists up to 800F, these springs have got the same tension as Red Champion, but the quality and workout is far more professiona -
CAHOZA Single endbell for C-Cans (G-12) - #126
CAHOZA Single endbell for C-Cans (G-12)
Aluminium hard anodised single endbell for G12 Cahoza C-cans, lightened, pattern hole drilled for hardware #170 and #171
-
CAHOZA Assembled endbell for G12 C-Cans - #146
CAHOZA Assembled endbell for G12 C-Cans
New aluminium hard anodised assembled endbell for all Cahoza C-cans (G12), gold plated horizontal hardware (#171), 3coil aluminium spring posts, includes stainless steel ball bearing, diameter for cans is 21,25mm (.837"), this endbell is made from very hard aluminium, perfectly dissipates heat away from brushes
-
CAHOZA Assembled endbell for G12 C-Cans +4° rotation - #146-H4
CAHOZA Assembled endbell for G12 C-Cans +4° rotation
New aluminium hard anodised assembled endbell for all Cahoza C-cans (G12), gold plated horizontal hardware (#171) turned to +4°, 3coil aluminium spring posts, includes stainless steel ball bearing, diameter for cans is 21,25mm (.837"), this endbell is made from very hard aluminium, perfectly dissipates heat away from brushes
-
CAHOZA Tapping screw for Allen head wrench, 1 pc. - #272
CAHOZA Tapping screw for Allen head wrench, 1 pc. - #272
-
CAHOZA 12 magnets FORMEL 32 SET UP .376T x .256L - can ID .570 - #100
PARAMETERS
- Magnets quantity: 12
- Outside dia.: .580" (14,75 mm)
- Magnets height: .376" (9,6 mm)
- Magnets length: .255" (6,5 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .567" (14.4 mm)
- For armatures dia.: .472" armatures, especially altered horizontal hardware, 3 coil anodised spring posts, endbell is milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis
-
CAHOZA 16 magnets FORMEL 32 SET UP .376T x .256L - can ID .570 - #100-A
PARAMETERS
- Magnets quantity: 16
- Outside dia.: .580" (14,75 mm)
- Magnets height: .376" (9,6 mm)
- Magnets length: .255" (6,5 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .567" (14.4 mm)
- For armatures dia.: .472" armatures, especially altered horizontal hardware, 3 coil anodised spring posts, endbell is milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis
-
CAHOZA SPORT 32 SETUP V 16 SEGMENT, 450T x .300L - can ID .577 - #101
PARAMETERS
- 16 segment magnets – bevelled 15°
- Outside dia.: .577" (14,60 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, especially altered vertical hardware, 5 coil anodised spring posts, long tower for PK arms (with commudator cap), endbell is partially milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis
-
CAHOZA SPORT 32 SETUP V 16 SEGMENT, 450T x .300L - can ID .577 - #101-A
PARAMETERS
- 16 segment magnets – bevelled 7°
- Outside dia.: .577" (14,60 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, especially altered vertical hardware, 5 coil anodised spring posts, long tower for PK arms (with commudator cap), endbell is partially milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis
-
CAHOZA SPORT 32 SETUP V 24 SEGMENT, 450T x .300L - can ID .577 - #101-B
PARAMETERS
- 16 segment magnets – bevelled 15°
- Outside dia.: .577" (14,60 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, especially altered vertical hardware, 5 coil anodised spring posts, long tower for PK arms (with commudator cap), endbell is partially milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis
-
CAHOZA Gear 64 pitch, 38T, 0° angle, 3/32" axle, Ø15.80 mm - #6
CAHOZA Gear 64 pitch, 38T, 0° angle, 3/32" axle, Ø15.80 mm - #6
Polymer gears 64 pitch, for 3/32" axle, but only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester,
-
CAHOZA POLYMER GEAR 64 PITCH, 37T, 16° ANGLE, 3/32" AXLE, Ø15,42 mm, 12 pc - #11 (CAH6437a)
POLYMER GEARS 64 PITCH ANGLED 16°
polymer gears 64 pitch, for 3/32" axle, angled 16°, selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 37, 38, 39 teeth -
CAHOZA POLYMER GEAR 64 PITCH, 37T, 16° ANGLE, 3/32" AXLE, Ø15,42 mm - #11 (CAH6437a)
POLYMER GEARS 64 PITCH ANGLED 16°
polymer gears 64 pitch, for 3/32" axle, angled 16°, selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 37, 38, 39 teeth -
CAHOZA POLYMER GEAR 72 PITCH, 43T, 16° ANGLE, 3/32" AXLE, Ø15,7 mm - #4
POLYMER GEARS 72 PITCH ANGLED 16°
polymer gears 72 pitch, for 3/32" axle, 42, 43, 44 teeth angled by 16°, especially shaped teeth works perfectly with any pinion, tested on US NATS in 2002 and won in nearly all categories -
CAHOZA POLYMER GEAR 72 PITCH, 43T, 16° ANGLE, HIGH DURABLE,3/32" AXLE, Ø15,72 mm - #4-B
CAHOZA POLYMER GEAR 72 PITCH, 43T, 16° ANGLE, HIGH DURABLE,3/32" AXLE, Ø15,72 mm
new highly durable polymer gears 72 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant.
-
CAHOZA POLYMER GEAR 80 PITCH, 44T, 0° angle, 3/32" axle, Ø14,56 mm - #1
POLYMER GEARS 80 PITCH ELITE
polymer gears 80 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 44, 45 teeth -
CAHOZA GEAR CAHOZA 80 PITCH 44T, 0° angle, 2 mm axle, Ø14.56 mm glued on 2 mm axle - CAH#
The hub is cut to a width 3.8 mm & machined to a diameter 3.5 mm
CAHOZA gluing gears for Vladimir Horky. They're very strongly glued, therefore it's more reliable
You can order gluing any gear on any axle. Price for gluing & machining - $3.5 (ZHB#109)
-
CAHOZA Red anodized aluminium guide nut, 9 mm socket, 1 pc. - #31-A-1
CAHOZA Red anodized aluminium guide nut, 9 mm socket, 1 pc. - #31-A
anodised aluminium guide nuts, made on a CNC machine, including the hexagon shape, size is 9mm (.354"), available in red color
-
CAHOZA Red anodized aluminium guide nut, 9 mm socket, 10 pc. - #31-A
CAHOZA Red anodized aluminium guide nut, 9 mm socket, 1 pc. - #31-A
anodised aluminium guide nuts, made on a CNC machine, including the hexagon shape, size is 9mm (.354"), available in red color