CAHOZA
-
CAHOZA Low profile cut down nylon elastic guide, w/out thread - #26
cut down guide for integral guide tongue chassis, content: blue nylon, glass fibre, these guides have minimum content of glass fibre for higher elasticity, ideal for Production chassis
-
CAHOZA CUT DOWN GRAPHITE GUIDE, non thread - #28
CUT DOWN GRAPHITE NYLON GUIDE
cut down guide for integral guide tongue chassis, content: black nylon, glass fibre, graphite -
CAHOZA Ø2 mm AXLE (length 55 mm) - #24
SOLID AXLE 2MM
solid 2mm axle, highly durable 60HRc, axle is very fine grinded and polished, the 2mm diameter is very accurate with maximum deflection of 0,001 mm (.00004"), great straightness along the entire length, it is crooked to max. 0,005 mm (.0002") throughout the entire length, ends are also grinded, exact diameter of this axle is 1,992mm (.07838"), length is 51mm (2") the best axle ever available for Scale racing -
CAHOZA EDM drilled (.040" hole) Ø2 mm hollow axle - #24-H
CAHOZA EDM drilled (.040" hole) Ø2 mm hollow axle - #24-H
The axle is drilled by EDM, hole diameter is 1.0mm (.04"), axle is very accurate, although the axle is lightened it is still strong
-
CAHOZA ALUMINUM ANODISED SPRING POST /3 COIL,1 pair - #154
ANODISED SPRING POSTS - 3 COIL SPRINGS
aluminium anodised spring posts for 3 coil springs, spring post do not fit Cahoza plastic G12 endbells, suitable for hardware #170 and #171, packaged 10 pairs per bag -
-
CAHOZA ARM SPACER BRONZE .004", 24 psc. - #36
PHOSPHOR BRONZE SPACERS 0,1
phosphor bronze spacers, thickness 0,1 mm (.004"), ultra precision fit on armature shaft to eliminate vibration due to loose fit, phosphor bronze is very hard, but will not stick to magnets, packaged 24 per bag -
CAHOZA C CAN TYPE "UL" - #252
C-CAN TYPE UL
Cahoza C-can, produced from 0,4mm (.0157") thick hardmetal plate -
CAHOZA ANODIZED 5 COIL SPRING POSTS, 1 pair - #157
ANODISED SPRING POSTS - 5 COIL SPRINGS
aluminium anodised spring posts for 5 coil springs, avaliable in red-blue and red-black combinations, suitable for hardware #170 and #171, packaged 10 pairs per bag -
CAHOZA Light braid, 408 strands, .023" thick, 1 pair - #340
CAHOZA Light braid, 408 strands, .023" thick, 1 pair - #340
these braids size is 4.5 x 0.6 x 30 mm (.177" x .023" x 1.181"), 408 strands, made from very pure copper (99.9 %), these braids are ideal for PR24, ES24, SP32 and F1/32, they will last longer, the production process is finalized by Cahoza (handmade)
-
CAHOZA Medium braid, 552 strands, .027" thick, 1 pair - #341
CAHOZA Medium braid, 552 strands, .027" thick, 1 pair - #341
these braids size is 4.8 x 0.7 x 30 mm (.188" x .027" x 1.181"), 552 strands, made from very pure copper (99.9 %), these braids are ideal for PR24 and ES24, they will last longer, the production process is finalized by Cahoza (handmade)
-
CAHOZA Heavy braid, 624 strands, .031" thick, 1 pair - #342
CAHOZA Heavy braid, 624 strands, .031" thick, 1 pair - #342
these braids size is 5.0 x 0.8 x 30 mm (.196" x .031" x 1.181"), 624 strands, made from very pure copper (99.9 %), these braids are ideal for wing cars, they will last longer, the production process is finalized by Cahoza (handmade)
-
CAHOZA Horizontal motor brushes, pair - #351
CAHOZA Horizontal motor brushes, pair - #351
The development of these motor brushes took 3 years and it was done with 2KK cooperation. Cahoza performed testing and comes to the conclusion that these are the good ones.
-
CAHOZA Horizontal motor brushes, 10 pairs - #351
CAHOZA Horizontal motor brushes, 10 pairs - #351
The development of these motor brushes took 3 years and it was done with 2KK cooperation. Cahoza performed testing and comes to the conclusion that these are the good ones.
-
CAHOZA Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.65 mm - #6
CAHOZA Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.65 mm - #6
Polymer gears 64 pitch, for 3/32" axle, but only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester,
-
CAHOZA Highly Durable Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.62 mm - #6-B
CAHOZA Highly Durable Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.62 mm - #6-B
Highly durable polymer gears 64 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on Cahoza roll tester, crash resistant
-
CAHOZA M1 Screw & Insulator, 1 set - #113
CAHOZA M1 Screw & Insulator, 1 set
stainless steel M1 screws, for endbells F1/32 and Sport 32, including insulators
-
CAHOZA С-Can G12 motor - O - #230
Cahoza C-can motor, assembled using:
- "O" type C-can #250,
- Cahoza Tornado 2 magnets,
- Cahoza plastic endbell,
- Cahoza hardware #266,
- Cahoza aluminium spring cups,
- Cahoza tapping screws,
- Koford flanged oilites,
- Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator,
- Koford brushes M486,
- Cahoza springs #257,
- magnets are glued in using Cahoza single component epoxy,
- inside diameter of magnets is 13,45mm (.529"),
- weight of complete motor is only 19,2 grammes.
-
CAHOZA C-Can G12 motor - O - bevelled - #230B
Cahoza C-can motor, assembled using:
- "O" type C-can #250,
- Cahoza Tornado 2 bevelled magnets #276,
- Cahoza plastic endbell,
- Cahoza hardware #266,
- Cahoza aluminium spring cups,
- Cahoza tapping screws,
- Koford flanged oilites,
- Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator,
- Koford brushes M486,
- Cahoza springs #257,
- magnets are glued in using Cahoza single component epoxy,
- inside diameter of magnets is 13,45mm (.529"),
- weight of complete motor is only 18,2 grammes.
-
CAHOZA PHENOLIC INSULATORS, 1 pc. - #158
PHENOLIC INSULATORS
phenolic insulators, use on all aluminium endbells -
CAHOZA Phenolic insulators, ID 1,5 mm, OD 3 mm, thick. 0,5 mm, 24 pcs. - #158
CAHOZA Phenolic insulators, ID 1,5 mm x OD 3 mm x thick. 0,5 mm, 24 pcs. - #158
phenolic insulators, use on all aluminium endbells, suitable for anodised spring posts #154, #157, inside diameter 1,5mm, outside diameter 3mm, thickness 0,5mm, packed by 24pcs
-
CAHOZA Low profile long cut down nylon elastic guide, blue, w/out thread - #335
CAHOZA Low profile long cut down nylon elastic guide, blue, w/out thread - #335
long cut down guide for integral guide tongue chassis, lenght 26.8 mm, special shape of keel (see picture), content: blue nylon, glass fibre, these guides have minimum content of glass fibre for higher elasticity, very precise, high quality material used
-
CAHOZA EDM pinion 64 pitch, 7T, 0° angle, 2 mm bore, special black cover - #12
CAHOZA EDM pinion 64 pitch, 7T, 0° angle, 2 mm bore, special black cover - #12
EDM pinions 64 pitch 7T - 2mm hole, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 64 pitch gears
-
CAHOZA Low profile long cut down nylon elastic guide, violet, w/out thread - #336
CAHOZA Low profile long cut down nylon elastic guide, blue, w/out thread - #336
ong cut down guide for integral guide tongue chassis, lenght 26.8 mm, special shape of keel (see picture), content: violet nylon, glass fibre, these guides have higher content of glass fibre, they are more tough, very precise, high quality material used
-
CAHOZA ARM (2 mm) SPACER BRONZE .007" (0,18 mm), 24 psc. - #37
PHOSPHOR BRONZE SPACERS 0,18
the same as #36, but thickness is 0,18mm (.007"), packaged 24 per bag -
CAHOZA GEAR 72 PITCH 41T, 16° angle, 3/32" axle, Ø15.05 mm - #4
CAHOZA GEAR 72 PITCH 41T, 16° angle, 3/32" axle, Ø15.05 mm - #4
-
CAHOZA highly durable gear 72 pitch 38 teeth, 0° angle, 3/32" axle, Ø14.52 mm - #5B
CAHOZA highly durable gear 72 pitch 38 teeth, 0° angle, 3/32" axle, Ø14.52 mm
-
CAHOZA highly durable gear corrected 72 pitch 38 teeth, 0° angle, 3/32" axle, Ø14.52 mm - #5BC
CAHOZA highly durable gear corrected 72 pitch 38 teeth, 0° angle, 3/32" axle, Ø14.52 mm
-
CAHOZA Gear 64 pitch, 36T, 0° angle, 3/32" axle, Ø15.02 mm - #6
CAHOZA Gear 64 pitch, 36T, 0° angle, 3/32" axle, Ø15.02 mm - #6
Polymer gears 64 pitch, for 3/32" axle, but only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester,
-
CAHOZA Low profile long cut down nylon elastic guide, colorless, w/out thread - #337
CAHOZA Low profile long cut down nylon elastic guide, colorless, w/out thread - #337
long cut down guide for integral guide tongue chassis, lenght 26.8 mm, special shape of keel (see picture), content: colorless nylon, glass fibre, these guides have higher content of glass fibre, they are more tough, very precise, high quality material used, ideal for wing classes
-
CAHOZA G12 C-Can setup type UL - bevelled - #242-ULB
Cahoza C-can setup, assembled using:
- Cahoza C-can #252,
- Cahoza Tornado 5 bevelled magnets,
- Cahoza endbell #262,
- Cahoza spring cups,
- 2x5 precisely turned oilite in endbell, ball bearing in can,
- Cahoza screws,
- for .518" armatures, Koford ones are recommended,
- professionaly assembled,
- weight 10.8 grammes
-
CAHOZA Phenolic insulators, ID 1,5 mm, OD 3 mm, thick. .012" (0,3 mm), 1 pc. - #159
CAHOZA Phenolic insulators, ID 1,5 mm, OD 3 mm, thick. .012" (0,3 mm), 1 pc. - #159
use on all aluminium endbells, suitable for anodised spring posts #154, #157, inside diameter 1,5mm, outside diameter 3mm, thickness 0,3mm, packed by 24pcs
-
CAHOZA Phenolic insulators, ID 1,5 mm, OD 3 mm, thick. .012" (0,3 mm), 24 pcs. - #159
CAHOZA Phenolic insulators, ID 1,5 mm, OD 3 mm, thick. .012" (0,3 mm), 24 pcs. - #159
use on all aluminium endbells, suitable for anodised spring posts #154, #157, inside diameter 1,5mm, outside diameter 3mm, thickness 0,3mm, packed by 24pcs
-
CAHOZA Ø3/32" (2.36 mm) AXLE (length 53.1 mm) - #23
SOLID AXLE 3/32
solid 3/32" axle, highly durable 60HRc, axle is very fine grinded and polished, the 3/32" diameter is very accurate with maximum deflection of 0,001 mm (.00004"), great straightness along the entire length, it is crooked to max. 0,005 mm (.0002") throughout the entire length, ends are also grinded, exact diameter of this axle is 2,371 mm (.093346"), the best axle ever available for profi racing -
CAHOZA GEAR 64 PITCH, 36T, 15° angle, 3/32" axle, Ø14.95 mm - #11-S
CAHOZA GEAR 64 PITCH, 36T, 15° angle, 3/32" axle, Ø14.95 mm - #11-S
-
CAHOZA Low profile long cut down nylon elastic guide, straight keel, violet, w/out thread - #339
CAHOZA Low profile long cut down nylon elastic guide, straight keel, violet, w/out thread - #339
Upgraded version of long cut down guide (#336) for integral guide tongue chassis, lenght 26.8 mm, straight keel (see picture), content: violet nylon, glass fibre, these guides have higher content of glass fibre, they are more tough, very precise, high quality material used
-
CAHOZA LIGHT PROFILE ENDBELLS - #257
New polymer light profile endbells for Cahoza C-can, available in 4 colors, weight only 0,7 grams
-
CAHOZA Screw 4/40" in rims & gears, .050" hex setscrews, 1 pc. - #321
CAHOZA Screw 4/40" in rims & gears, .050" hex setscrews, 1 pc. - #321
use for attaching tires and gears to axle, length only 3/32", for .050" imbus tip
-
CAHOZA Screw 4/40" in rims & gears, .050" hex setscrews, 24 pcs. - #321
CAHOZA Screw 4/40" in rims & gears, .050" hex setscrews, 24 pcs. - #321
use for attaching tires and gears to axle, length only 3/32", for .050" imbus tip
-
CAHOZA Screw 4/40" hollow in rims & gears, .050" hex setscrews, 1 pc. - #320
CAHOZA Screw 4/40" hollow in rims & gears, .050" hex setscrews, 1 pc. - #320
use for attaching tires and gears to axle, length 3/32", for .050" imbus tip
-
CAHOZA Screw 4/40" hollow in rims & gears, .050" hex setscrews, 24 pcs. - #320
CAHOZA Screw 4/40" hollow in rims & gears, .050" hex setscrews, 24 pcs. - #320
use for attaching tires and gears to axle, length 3/32", for .050" imbus tip, packed 24 pcs per bag
-
CAHOZA Motor 12V - 40,000 rpm - #282
CAHOZA Motor 12V - 40,000 rpm - #282
new short can motor 12V-40,000 rpm, 320 g/cm. Armature is axially aligned to the magnetic field for the best performance and axial play between oilites is from .004" to .008". Shaft dia is 2mm.
-
CAHOZA 3/32" (2.36 mm), .012" (0,3 mm) THICK, BRONZE AXLE SPACER, 24 pcs. - #35
PHOSPHOR BRONZE SPACERS 3/32 phosphor bronze axle spacers, 0,25mm (.01"), very hard but will not stick to magnets, packaged 24 per bag
-
CAHOZA Highly durable gear 72 pitch 38 teeth, 0° angle, 2 mm axle, Ø14.15 mm - #5-B-2
CAHOZA Highly durable gear 72 pitch 38 teeth, 0° angle, 2 mm axle, Ø14.15 mm - #5-B-2
-
-
-
-
CAHOZA Highly durable gear corrected 72 pitch 38 teeth, 0° angle, 2 mm axle, Ø14.52 mm - #5-BC-2
CAHOZA Highly durable gear corrected 72 pitch 38 teeth, 0° angle, 2 mm axle, Ø14.52 mm - #5-BC-2
-
CAHOZA 9MM GUIDE NUTS - #31-1
GUIDE NUTS 9MM
aluminium guide nuts, professionaly made on a CNC machine, including the hexagon shape, absolutely precise, size is 9mm (.354"), packaged 10pcs per bag -
CAHOZA 9MM GUIDE NUTS, 10 pc - #31
GUIDE NUTS 9MM
aluminium guide nuts, professionaly made on a CNC machine, including the hexagon shape, absolutely precise, size is 9mm (.354"), packaged 10pcs per bag -
CAHOZA highly durable gear 72 pitch 39 teeth, 0° angle, 3/32" axle, Ø14.52 mm - #5B
CAHOZA highly durable gear 72 pitch 39 teeth, 0° angle, 3/32" axle, Ø14.52 mm
-
CAHOZA POLYMER GEAR 72 PITCH, 42T, 16° ANGLE, 3/32" AXLE, Ø15.38 mm - #4
POLYMER GEARS 72 PITCH ANGLED 16°
polymer gears 72 pitch, for 3/32" axle, 42, 43, 44 teeth angled by 16°, especially shaped teeth works perfectly with any pinion, tested on US NATS in 2002 and won in nearly all categories -
CAHOZA POLYMER GEAR 72 PITCH, 42T, 16° ANGLE, big hub, 3/32" AXLE, Ø15,38 mm, stronger - #4-B
HIGHLY DURABLE GEARS 72 PITCH ANGLED 16°
new highly durable polymer gears 72 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, available in 42 teeth, angled by 16° -
CAHOZA ARM (2 mm) SPACER BRONZE .012" (0,3 mm), 24 psc. - #38
PHOSPHOR BRONZE SPACERS 0,3
the same as #36, but thickness is 0,3mm (.0118"), packaged 24 per bag -
CAHOZA highly durable gear 72 pitch 39 teeth, 0° angle, 2 mm axle, Ø14.52 mm - #5B2 (CAH7239)
CAHOZA highly durable gear 72 pitch 39 teeth, 0° angle, 2 mm axle, Ø14.52 mm
-
CAHOZA highly durable gear 72 pitch 39 teeth, 0° angle, 2 mm axle, Ø14.52 mm, 12 pc - #5B2 (CAH7239)
CAHOZA highly durable gear 72 pitch 39 teeth, 0° angle, 2 mm axle, Ø14.52 mm
-
CAHOZA Gear 64 pitch, 37T, 0° angle, 3/32" axle, Ø15.42 mm - #6
CAHOZA Gear 64 pitch, 37T, 0° angle, 3/32" axle, Ø15.42 mm - #6
Made by Cahoza, these are - without question - the finest and most accurate Spur Gears offered in the Slot Car World today.
-
CAHOZA Highly Durable Gear 64 pitch, 37T, 0° angle, 3/32" axle, Ø15.42 mm - #8
CAHOZA Highly Durable Gear 64 pitch, 37T, 0° angle, 3/32" axle, Ø15.42 mm - #8
Highly durable polymer gears 64 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on Cahoza roll tester, crash resistant
-
CAHOZA GEAR 72 PITCH 40T, 0° angle, 3/32" axle, Ø14.85 mm - #5
POLYMER GEARS 72 PITCH STRAIGHT ELITE
polymer gears 72 pitch, for 3/32" axle, but only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 40, 41 teeth, gears perfect for Eurosport 24 -
-
CAHOZA Drilled gear 72 pitch 40 teeth, 0° angle, 3/32" axle (with reduced weight), Ø14.85 mm - #9
CAHOZA Drilled gear 72 pitch 40 teeth, 0° angle, 3/32" axle (with reduced weight), Ø14.85 mm - #9
-
CAHOZA GEAR 72 PITCH 40T, 0° angle, 2 mm. axle, Ø14.8 mm - #5-B-2
POLYMER GEARS 72 PITCH STRAIGHT ELITE
polymer gears 72 pitch, for 2 mm axle, but only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 40, 41 teeth, gears perfect for Eurosport 24
-
CAHOZA POLYMER GEAR 72 PITCH, 41T, 0° ANGLE, 3/32" AXLE, Ø15.2 mm - #5
POLYMER GEARS 72 PITCH STRAIGHT ELITE
polymer gears 72 pitch, for 3/32" axle, but only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 40, 41 teeth, gears perfect for Eurosport 24 -
CAHOZA HIGH TEMPERATURE SILVER SOLDER - #44
new excellent high temperature silver solder with perfect flux core (non corrosive flux), this solder is 94.8% tin and 5.2% silver, diameter 1mm, long 6 feet (1,8m
-
CAHOZA GEAR 80 PITCH 44T, 0° angle, 2 mm. axle, Ø14.56 mm - #2
POLYMER GEARS 80 PITCH ELITE 2MM AXLE
polymer gears 80 pitch, for 2mm axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 44, 45 teeth -
CAHOZA GEAR 80 PITCH 44T, 0° angle, 2 mm. axle, Ø14.56 mm, HARDER- #2-B
HIGHLY DURABLE GEARS 80 PITCH 2MM AXLE
new highly durable polymer gears 80 pitch, for 2mm axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, available in 44 teeth -
CAHOZA Commutator cup, 1 pc. - #150
CAHOZA Commutator cup, 1 pc.
Aluminium hard anodised commutator cups for G7, G27 and Scale armatures.
For using these cups it is needed to mill the commutator to dia 4,72mm (+0,01mm), in length 1,3mm
-
CAHOZA VERTICAL ENDBELL HARDWARE, 1 set - #170
NEW GOLD PLATED VERTICAL HARDWARE
NEW aluminium gold plated vertical hardware, high precision, this hardware have got larger cooling surface, deeper brush slots, another novelty is an upper little hook that ensures hardware won't tear off the endbell, hole pattern is the same as with #171, attention: before pressing the little hook to its final position, it is needed to grind out the layer of gold and nickel from upper side of the hook (0,05mm-0,1mm) -
CAHOZA GOLD PLATED VERTICAL HARDWARE FOR SPORT 32 - #CAH109
CAHOZA GOLD PLATED VERTICAL HARDWARE FOR SPORT 32
NEW aluminium gold plated vertical hardware, high precision.
-
CAHOZA black covered pinion 80 pitch 6 teeth, 0° angle 1.5 mm bore, EDM - #13
CAHOZA black covered pinion 80 pitch 6 teeth, 0° angle 1.5 mm bore, EDM - #13
-
CAHOZA Lead wire 18Ga (section 0,82 mm²), red, 1,5 m (5 ft) - #334
CAHOZA Lead wire 18Ga (section 0,82 mm²), red, 1,5 m (5 ft) - #334
18 gauge wire, bare copper conductor, red silicon insulation, 408 strands, 5 feet
-
CAHOZA HORIZONTAL ENDBELL HARDWARE, 1 set - #171
NEW GOLD PLATED HORIZONTAL HARDWARE
NEW aluminium gold plated horizontal hardware, high precision, this hardware have got larger cooling surface, deeper brush slots, another novelty is an upper little hook that ensures hardware won't tear off the endbell, hole pattern is the same as with #170, attention: before pressing the little hook to its final position, it is needed to grind out the layer of gold and nickel from upper side of the hook (0,05mm-0,1mm -
CAHOZA GOLD PLATED HORIZONTAL HARDWARE FOR F1/32 - #CAH108
CAHOZA GOLD PLATED HORIZONTAL HARDWARE FOR F1/32
NEW aluminium gold plated horizontal hardware, high precision.
-
CAHOZA GEAR 80 PITCH 44T, 0° angle, 2 mm axle, Ø14.56 mm glued on 2 mm axle - CAHOZA
The hub is cut to a width 3.8 mm & machined to a diameter 3.5 mm
CAHOZA gluing gears for Vladimir Horky. They're very strongly glued, therefore it's more reliable
You can order gluing any gear on any axle. Price for gluing & machining - $3,5
-
CAHOZA Magnet gluing tool - dia. 531" - #68-531
CAHOZA Magnet gluing tool - dia. 531" - #68-531
stainless steel slug with smooth finish (CNC machined) with knurled aluminium nut. Used for precise gluing of not honed Tornado magnets into Cahoza C-cans. Diameter .531" (13.48 mm).
-
CAHOZA Magnet gluing tool - dia. 538" - #68-538
CAHOZA Magnet gluing tool - dia. 538" - #68-538
stainless steel slug with smooth finish (CNC machined) with knurled aluminium nut. Used for regluing of Tornado magnets into Cahoza C-cans. Diameter .538" (13.66 mm).
-
CAHOZA 3 COIL SPRINGS STAINLESS STEEL, pair - #254
3 COIL SPRINGS
Cahoza springs for G12, Cobalt 12, INT15 motors, made from stainless steel, resists up to 800F, these springs have got the same tension as Red Champion, but the quality and workout is far more professiona -
CAHOZA Single endbell for C-Cans (G-12) - #126
CAHOZA Single endbell for C-Cans (G-12)
Aluminium hard anodised single endbell for G12 Cahoza C-cans, lightened, pattern hole drilled for hardware #170 and #171
-
CAHOZA Assembled endbell for G12 C-Cans - #146
CAHOZA Assembled endbell for G12 C-Cans
New aluminium hard anodised assembled endbell for all Cahoza C-cans (G12), gold plated horizontal hardware (#171), 3coil aluminium spring posts, includes stainless steel ball bearing, diameter for cans is 21,25mm (.837"), this endbell is made from very hard aluminium, perfectly dissipates heat away from brushes
-
CAHOZA Assembled endbell for G12 C-Cans +4° rotation - #146-H4
CAHOZA Assembled endbell for G12 C-Cans +4° rotation
New aluminium hard anodised assembled endbell for all Cahoza C-cans (G12), gold plated horizontal hardware (#171) turned to +4°, 3coil aluminium spring posts, includes stainless steel ball bearing, diameter for cans is 21,25mm (.837"), this endbell is made from very hard aluminium, perfectly dissipates heat away from brushes
-
CAHOZA Tapping screw for Allen head wrench, 1 pc. - #272
CAHOZA Tapping screw for Allen head wrench, 1 pc. - #272
-
CAHOZA 12 magnets FORMEL 32 SET UP .376T x .256L - can ID .570 - #100
PARAMETERS
- Magnets quantity: 12
- Outside dia.: .580" (14,75 mm)
- Magnets height: .376" (9,6 mm)
- Magnets length: .255" (6,5 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .567" (14.4 mm)
- For armatures dia.: .472" armatures, especially altered horizontal hardware, 3 coil anodised spring posts, endbell is milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis
-
CAHOZA 16 magnets FORMEL 32 SET UP .376T x .256L - can ID .570 - #100-A
PARAMETERS
- Magnets quantity: 16
- Outside dia.: .580" (14,75 mm)
- Magnets height: .376" (9,6 mm)
- Magnets length: .255" (6,5 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .567" (14.4 mm)
- For armatures dia.: .472" armatures, especially altered horizontal hardware, 3 coil anodised spring posts, endbell is milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis
-
CAHOZA SPORT 32 SETUP V 16 SEGMENT, 450T x .300L - can ID .577 - #101
PARAMETERS
- 16 segment magnets – bevelled 15°
- Outside dia.: .577" (14,60 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, especially altered vertical hardware, 5 coil anodised spring posts, long tower for PK arms (with commudator cap), endbell is partially milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis
-
CAHOZA SPORT 32 SETUP V 16 SEGMENT, 450T x .300L - can ID .577 - #101-A
PARAMETERS
- 16 segment magnets – bevelled 7°
- Outside dia.: .577" (14,60 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, especially altered vertical hardware, 5 coil anodised spring posts, long tower for PK arms (with commudator cap), endbell is partially milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis
-
CAHOZA SPORT 32 SETUP V 24 SEGMENT, 450T x .300L - can ID .577 - #101-B
PARAMETERS
- 16 segment magnets – bevelled 15°
- Outside dia.: .577" (14,60 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, especially altered vertical hardware, 5 coil anodised spring posts, long tower for PK arms (with commudator cap), endbell is partially milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis
-
CAHOZA Gear 64 pitch, 38T, 0° angle, 3/32" axle, Ø15.80 mm - #6
CAHOZA Gear 64 pitch, 38T, 0° angle, 3/32" axle, Ø15.80 mm - #6
Polymer gears 64 pitch, for 3/32" axle, but only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester,
-
CAHOZA POLYMER GEAR 64 PITCH, 37T, 16° ANGLE, 3/32" AXLE, Ø15,42 mm, 12 pc - #11 (CAH6437a)
POLYMER GEARS 64 PITCH ANGLED 16°
polymer gears 64 pitch, for 3/32" axle, angled 16°, selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 37, 38, 39 teeth -
CAHOZA POLYMER GEAR 64 PITCH, 37T, 16° ANGLE, 3/32" AXLE, Ø15,42 mm - #11 (CAH6437a)
POLYMER GEARS 64 PITCH ANGLED 16°
polymer gears 64 pitch, for 3/32" axle, angled 16°, selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 37, 38, 39 teeth -
CAHOZA POLYMER GEAR 72 PITCH, 43T, 16° ANGLE, 3/32" AXLE, Ø15,7 mm - #4
POLYMER GEARS 72 PITCH ANGLED 16°
polymer gears 72 pitch, for 3/32" axle, 42, 43, 44 teeth angled by 16°, especially shaped teeth works perfectly with any pinion, tested on US NATS in 2002 and won in nearly all categories -
-
CAHOZA POLYMER GEAR 72 PITCH, 43T, 16° ANGLE, HIGH DURABLE,3/32" AXLE, Ø15,72 mm - #4-B
CAHOZA POLYMER GEAR 72 PITCH, 43T, 16° ANGLE, HIGH DURABLE,3/32" AXLE, Ø15,72 mm
new highly durable polymer gears 72 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant.
-
CAHOZA POLYMER GEAR 80 PITCH, 44T, 0° angle, 3/32" axle, Ø14,56 mm - #1
POLYMER GEARS 80 PITCH ELITE
polymer gears 80 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 44, 45 teeth -
CAHOZA GEAR CAHOZA 80 PITCH 44T, 0° angle, 2 mm axle, Ø14.56 mm glued on 2 mm axle - CAH#
The hub is cut to a width 3.8 mm & machined to a diameter 3.5 mm
CAHOZA gluing gears for Vladimir Horky. They're very strongly glued, therefore it's more reliable
You can order gluing any gear on any axle. Price for gluing & machining - $3.5 (ZHB#109)
-
CAHOZA Red anodized aluminium guide nut, 9 mm socket, 1 pc. - #31-A-1
CAHOZA Red anodized aluminium guide nut, 9 mm socket, 1 pc. - #31-A
anodised aluminium guide nuts, made on a CNC machine, including the hexagon shape, size is 9mm (.354"), available in red color
-
CAHOZA Red anodized aluminium guide nut, 9 mm socket, 10 pc. - #31-A
CAHOZA Red anodized aluminium guide nut, 9 mm socket, 1 pc. - #31-A
anodised aluminium guide nuts, made on a CNC machine, including the hexagon shape, size is 9mm (.354"), available in red color
-
CAHOZA TAPPING SCREWS, for T5 driver, 1 pc. - #273-1
Cahoza profi tapping screws, thread diameter is 1,52mm (.0598"), length thread is 4 mm (.157"), bolt head high is 1,2mm (.047"), for T5 driver or imbus Tip .051", screws are black coated,
-
CAHOZA TAPPING SCREWS, for T5 driver, 24 pc. - #273
Cahoza profi tapping screws, thread diameter is 1,52mm (.0598"), length thread is 4 mm (.157"), bolt head high is 1,2mm (.047"), for T5 driver or imbus Tip .051", screws are black coated,
-
CAHOZA Motor screw 0/80" stainless steel, 1 pc. - #325-1
CAHOZA Motor screw 0/80" stainless steel, 1 pc. - #325-1
use for attaching Aluminium endbells to steel cans, thread length is 1,75mm (.069"), bolt head height is 1mm (.039"), for T5 driver
-
CAHOZA Motor screw 0/80" stainless steel, 24 pcs. - #325
CAHOZA Motor screw 0/80" stainless steel, 24 pcs. - #325
use for attaching Aluminium endbells to steel cans, thread length is 1,75mm (.069"), bolt head height is 1mm (.039"), for T5 driver, packed 24 pcs per bag
-
CAHOZA 3 COIL MOTOR SPRINGS STEEL, pair - #255
3 COIL STEEL SPRINGS
Cahoza springs for G12, Cobalt 12, INT15, G27 motors and G7 qualification motors, made from hardened steel coated with white shiny zinc, withstands 800F, these springs have got 8% more tension than the stainless steel springs -
CAHOZA TORNADO 2 MAGNETS (C-CANS), 1 pair - #275
NEW CAHOZA TORNADO 2 MAGNETS
these magnets are produced from special Japanese material, they are manufactured using anisotropic technology and after zapping the magnetic lines are radially oriented, height 14,15mm (.555"), length 11,5mm (.453"), thickness 3,85mm (.152"), weight 6,58 grammes, Tornado 2 magnets are marked with white dot, magnets are legal for USRA and ISRA -
CAHOZA TORNADO 2 (C-CANS) BEVELED MAGNETS, pair - #276
NEW CAHOZA TORNADO 2 BEVELLED MAGNETS
the same as #275 magnets, but feature 16-degree cut, weight 5,96 grammes, these magnets are legal for USRA and ISRA -
CAHOZA TORNADO 5 MAGNETS (C-CANS), 1 pair - #277
CAHOZA TORNADO 5 MAGNETS
these popular magnets are identical as #275 (Tornado 2 magnets) but specially recharged, selected for maximum strength and matched, weight 6,58 grammes, Tornado 5 magnets are marked with yellow dot, magnets are legal for USRA and ISRA -
CAHOZA Brass guide clips short, pair - #333
CAHOZA Brass guide clips short, pair - #333
NEW!!!
These clips perfectly fit new long guide, manufactured from tough brass plate, thickness 0,25mm (.01"), lead wires are soldered through windows in guide
-
CAHOZA BRASS GUIDE CLIPS SHORT, pair - #29
guide clips for all types of guides, manufactured from tough brass plate, thickness 0,3mm (.0118"), lead wires are soldered through windows in guide
-
CAHOZA ALUMINUM HARD NICKEL BRUSH HOODS, set - #266
ALUMINIUM NICKEL PLATED BRUSH HOODS
hardware (brush hoods), made from hard aluminium plate with thickness of 0.4mm (.0157"), nickel plated, hand work, most precise -
CAHOZA 5 coil stainless steel springs, 1 pair - #161
CAHOZA 5 coil stainless steel springs, 1 pair - #161
Cahoza springs for Scale motors and G27 motors, made from stainless steel, resists up to 800F
-
CAHOZA Aluminium nickel plated brush hoods, 1 bag (6 pairs) - #266
CAHOZA Aluminium nickel plated brush hoods, 1 bag (6 pairs) - #266
hardware (brush hoods), made from hard aluminium plate with thickness of 0.4mm (.0157"), nickel plated, hand work, most precise, no more grinding or drilling
-
-
CAHOZA BRASS GUIDE CLIPS LONG, pair - #30
GUIDE CLIPS LONG - guide clips for all types of guides, manufactured from tough brass plate, thickness 0,3mm (.0118"), lead wires are soldered onto the top side of the clip
-
CAHOZA PROF GOLD PLATED BRUSH HOODS, set - #268
NEW PROFESSIONAL ALUMINIUM GOLD PLATED BRUSH HOODS
total new professional hardware (brush hoods) with heatsinks, made from hard aluminium plate with thickness of 0.4mm (.0157"), gold plated, hand work, most precise -
CAHOZA black covered pinion 80 pitch 6 teeth, 0° angle 1.2 mm bore, EDM - #13A
CAHOZA black covered pinion 80 pitch 6 teeth, 0° angle 1.2 mm bore, EDM - #13A
-
CAHOZA .050" ALUMINIUM ALLEN WRENCH - #66
Very accurate and convenient wrench!
ALUMINIUM WRENCH WITH GUIDE NUT TOOL 9
aluminium wrench with .05" tip and guide nut tool, anodised and knurled for better gripping, for 9mm (.354") guide nut
-
CAHOZA T SHIRT XL - #310XL
100% pure cotton, available in black or purple, available in XL or XXL, always specify color and size when ordering
-
CAHOZA T-Shirt - Fresh Ideas - Purple - XXL - #310
CAHOZA T-Shirt - Fresh Ideas - Purple - XXL - #310
100% pure cotton, purple color
-
CAHOZA T-Shirt - My Best - Black - XXL - #312
CAHOZA T-Shirt - My Best - Black - XXL - #312
100% pure cotton, black color
-
CAHOZA 5 COIL SPRINGS, pair - #CAH160
5 COIL SPRINGS
Cahoza springs for Scale motors and G27 motors, made from hardened steel coated with white shiny zinc, withstands 800F, high quality and accuracy -
CAHOZA TORNADO 5 (C-CANS) BEVELLED MAGNETS, pair - #278
NEW CAHOZA TORNADO 5 BEVELLED MAGNETS
the same as #277 magnets, but feature 16-degree cut, weight 5,96 grammes, these magnets are legal for USRA and ISRA -
CAHOZA C-Can G12 motor - U - #231
Cahoza C-can motor, assembled using:
- "U" type C-can #251,
- Cahoza Tornado 2 magnets,
- Cahoza plastic endbell,
- Cahoza hardware #266,
- Cahoza aluminium spring cups,
- Cahoza tapping screws,
- Koford flanged oilites,
- Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator,
- Koford brushes M486,
- Cahoza springs #257,
- magnets are glued in using Cahoza single component epoxy,
- inside diameter of magnets is 13,45mm (.529"),
- weight of complete motor is only 19,1 grammes.
-
CAHOZA C-Can G12 motor - U - bevelled - #231B
Cahoza C-can motor, assembled using:
- "U" type C-can #251,
- Cahoza Tornado 2 bevelled magnets #276,
- Cahoza plastic endbell,
- Cahoza hardware #266,
- Cahoza aluminium spring cups,
- Cahoza tapping screws,
- Koford flanged oilites,
- Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator,
- Koford brushes M486,
- Cahoza springs #257,
- magnets are glued in using Cahoza single component epoxy,
- inside diameter of magnets is 13,45mm (.529"),
- weight of complete motor is only 18,1 grammes.
-
CAHOZA C-Can G12 motor - UL - #232
Cahoza C-can motor, assembled using:
- "UL" type C-can #252,
- Cahoza Tornado 2 magnets,
- Cahoza plastic endbell,
- Cahoza hardware #266,
- Cahoza aluminium spring cups,
- Cahoza tapping screws,
- Koford flanged oilites,
- Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator,
- Koford brushes M486,
- Cahoza springs #257,
- magnets are glued in using Cahoza single component epoxy,
- inside diameter of magnets is 13,45mm (.529"),
- weight of complete motor is only 19 grammes.
-
CAHOZA C-Can G12 motor - UL - bevelled - #232B
Cahoza C-can motor, assembled using:
- "UL" type C-can #252,
- Cahoza Tornado 2 bevelled magnets #276,
- Cahoza plastic endbell,
- Cahoza hardware #266,
- Cahoza aluminium spring cups,
- Cahoza tapping screws,
- Koford flanged oilites,
- Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator,
- Koford brushes M486,
- Cahoza springs #257,
- magnets are glued in using Cahoza single component epoxy,
- inside diameter of magnets is 13,45mm (.529"),
- weight of complete motor is only 18 grammes.
-
CAHOZA G12 Motor type O - #235-O
Cahoza C-can motor, assembled using:
- new Cahoza C-can #250,
- Cahoza Tornado 5 magnets,
- Cahoza endbell #262,
- Cahoza spring cups,
- 2x5 precisely turned oilites,
- best Koford brushes,
- 3 coil springs,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 19,2 grammes
-
CAHOZA G12 Motor type U - #235-U
Cahoza C-can motor, assembled using:
- new Cahoza C-can #251,
- Cahoza Tornado 5 magnets,
- Cahoza endbell #262,
- Cahoza spring cups,
- 2x5 precisely turned oilites,
- best Koford brushes,
- 3 coil springs,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 19,1 grammes
-
CAHOZA G12 Motor type O - #236-O
Cahoza C-can motor, assembled using:
- new Cahoza C-can #250,
- Cahoza Tornado 5 magnets,
- Cahoza endbell #262,
- Cahoza spring cups,
- 2x5 precisely turned oilite in endbell, ball bearing in can,
- best Koford brushes,
- 3 coil springs,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 19,2 grammes
-
CAHOZA G12 Motor type U - #236-U
Cahoza C-can motor, assembled using:
- new Cahoza C-can #251,
- Cahoza Tornado 5 magnets,
- Cahoza endbell #262,
- Cahoza spring cups,
- 2x5 precisely turned oilite in endbell, ball bearing in can,
- best Koford brushes,
- 3 coil springs,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 19,1 grammes
-
CAHOZA G12 Motor type UL - #236-UL
Cahoza C-can motor, assembled using:
- new Cahoza C-can #252,
- Cahoza Tornado 5 magnets,
- Cahoza endbell #262,
- Cahoza spring cups,
- 2x5 precisely turned oilite in endbell, ball bearing in can,
- best Koford brushes,
- 3 coil springs,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 19 grammes
-
CAHOZA G12 Motor type UL - bevelled - #236-ULB
Cahoza C-can motor, assembled using:
- new Cahoza C-can #252,
- Cahoza Tornado 5 beveled magnets,
- Cahoza endbell #262,
- Cahoza spring cups,
- 2x5 precisely turned oilite in endbell, ball bearing in can,
- Koford brushes,
- 3 coil springs,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled,
- weight 18.9 grammes
-
CAHOZA G12 Motor type O -- GOLD - #237-O
Cahoza C-can motor, assembled using:
- new Cahoza C-can #250,
- Cahoza Tornado 5 magnets,
- Cahoza endbell #263,
- Cahoza spring cups,
- ball bearings both in can and endbell,
- best Koford brushes,
- 3 coil teflon insulated springs,
- silver shunt wire,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 19,2 grammes
-
CAHOZA G12 Motor type U -- GOLD - #237-U
Cahoza C-can motor, assembled using:
- new Cahoza C-can #251,
- Cahoza Tornado 5 magnets,
- Cahoza endbell #263,
- Cahoza spring cups,
- ball bearings both in can and endbell,
- best Koford brushes,
- 3 coil teflon insulated springs,
- silver shunt wire,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 19,1 grammes
-
CAHOZA G12 Motor type UL -- GOLD - #237-UL
Cahoza C-can motor, assembled using:
- new Cahoza C-can #252,
- Cahoza Tornado 5 magnets,
- Cahoza endbell #263,
- Cahoza spring cups,
- ball bearings both in can and endbell,
- best Koford brushes,
- 3 coil teflon insulated springs,
- silver shunt wire,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 19 grammes
-
CAHOZA G12 Motor type UL -- BLUEPRINTED- #237-ULB
Cahoza C-can motor, assembled using:
- Cahoza UL C-can #252,
- Cahoza Tornado 5 beveled magnets,
- Cahoza #263 plastic endbell with gold plated hardware,
- Cahoza spring cups,
- ball bearings both in can and endbell,
- Koford brushes,
- 3 coil teflon insulated springs,
- silver shunt wire,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 18.9 grammes
-
CAHOZA PROFI G12 Motor type O - #238-O
Cahoza C-can motor, assembled using:
- new Cahoza C-can #250,
- Cahoza Tornado 5 magnets,
- Cahoza aluminium endbell #146,
- Cahoza spring cups,
- ball bearings both in can and endbell,
- best Koford brushes,
- 3 coil teflon insulated springs,
- silver shunt wire,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 19 grammes
-
CAHOZA PROFI G12 Motor type O - bevelled - #238-OB
Cahoza C-can motor, assembled using:
- new Cahoza C-can #250,
- Cahoza Tornado 5 beveled magnets,
- Cahoza aluminium endbell #146 with gold plated hardware,
- Cahoza spring cups,
- ball bearings both in can and endbell,
- best Koford brushes,
- 3 coil teflon insulated springs,
- silver shunt wire,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 18.8 grammes
-
CAHOZA PROFI G12 Motor type U - #238-U
Cahoza C-can motor, assembled using:
- new Cahoza C-can #251,
- Cahoza Tornado 5 magnets,
- Cahoza endbell #146,
- Cahoza spring cups,
- ball bearings both in can and endbell,
- best Koford brushes,
- 3 coil teflon insulated springs,
- silver shunt wire,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 18,9 grammes
-
CAHOZA PROFI G12 Motor type UL - #238-UL
Cahoza C-can motor, assembled using:
- new Cahoza C-can #252,
- Cahoza Tornado 5 magnets,
- Cahoza endbell #146,
- Cahoza spring cups,
- ball bearings both in can and endbell,
- best Koford brushes,
- 3 coil teflon insulated springs,
- silver shunt wire,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 18,8 grammes
-
CAHOZA ALUMINUM SPRING CUPS (C-CANS), pair - #270
ALUMINIUM SPRING CUPS diameter for springs is 3,55mm (.180"), length is 2mm, springs are perfectly fastened and don't loose at all
-
CAHOZA POLYMER GEAR 80 PITCH, 45T, 0° ANGLE, 3/32" AXLE, Ø14,9 mm - #1
POLYMER GEARS 80 PITCH ELITE
polymer gears 80 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 44, 45 teeth -
CAHOZA Setup kit - G27 Light .630" - #82
CAHOZA Setup kit - G27 Light .630" - #82
This kit contains can #80, single endbell #128 or #128-4, pair of gold plated horizontal hardware #171, pair of 5 coil anodized spring cups #157 and 4 pieces of phenolic insulators #159
-
CAHOZA EUROSPORT 24 SETUP 20 SEGMENT FLAT, .450T x .300L - can ID .590 - #102-A
PARAMETERS
- Magnets quantity: 20 flat
- Outside dia.: .590" (15,00 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)
-
CAHOZA EUROSPORT 24 SETUP 24 SEGMENT FLAT, .450T x .300L - can ID .590 - #103
PARAMETERS
- Magnets quantity: 24 flat
- Outside dia.: .590" (15,00 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)
-
CAHOZA EUROSPORT 24 SETUP V 24 SEGMENT, .450T x .300L - can ID .590 - #103-A
PARAMETERS
- 24 segmented magnets – bevelled 15°
- Outside dia.: .590" (15,00 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)
-
CAHOZA EUROSPORT 24 SETUP V 28 SEGMENT, .450T x .300L - can ID .590 - #103-B
PARAMETERS
- 28 segmented magnets – bevelled 7°
- Outside dia.: .590" (15,00 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)
-
CAHOZA POLYMER GEAR 64 PITCH, 38T, 16° ANGLE, 3/32" AXLE, Ø15,71 mm - #11
POLYMER GEARS 64 PITCH ANGLED 16°
polymer gears 64 pitch, for 3/32" axle, angled 16°, selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 37, 38, 39 teeth -
CAHOZA POLYMER GEAR 64 PITCH, 39T, 16° ANGLE, 3/32" AXLE, Ø16,25 mm - #11
CAHOZA POLYMER GEAR 64 PITCH, 39T, 16° ANGLE, 3/32" AXLE, Ø16,25 mm - #11
Gears are being made on a professional CNC machine. On every single piece size and number of teeth is stated. All hubs that Cahoza uses for gear production are being manufactured on a CNC machine with preciseness of 0,002mm. This teeth design provides high durability and accuracy.
-
CAHOZA Highly durable gear 64 pitch, 39T, 0° angle, 3/32" axle, Ø16.24 mm - #8
CAHOZA Gear 64 pitch, 39T, 0° angle, 3/32" axle, Ø16.24 mm - #8
Highly durable polymer gears 64 pitch, for 3/32" axle, but only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester,
-
CAHOZA GEAR 72 PITCH, 44T, 16° angle, 3/32" axle, Ø16.00 mm - #4
POLYMER GEARS 72 PITCH ANGLED 16°
polymer gears 72 pitch, for 3/32" axle, 42, 43, 44 teeth angled by 16°, especially shaped teeth works perfectly with any pinion, tested on US NATS in 2002 and won in nearly all categories -
CAHOZA Polymer gear 80 PITCH, 45T, 0° angle, HIGHLY DURABLE, 3/32" axle, Ø14,80 mm - #1-B
CAHOZA Polymer gear 80 PITCH, 45T, 0° angle, HIGHLY DURABLE, 3/32" axle, Ø14,80 mm
new highly durable polymer gears 80 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester.
-
CAHOZA POLYMER GEAR 80 PITCH, 45T, 0° ANGLE, BIG HUB, 3/32" AXLE, Ø14,9 mm, harder - #1-B
HIGHLY DURABLE GEARS 80 PITCH
new highly durable polymer gears 80 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, available in 45 teeth