CAHOZA

• 

  CAHOZA ARM (2 mm) SPACER BRONZE .007" (0,18 mm), 24 psc. - #37

  PHOSPHOR BRONZE SPACERS 0,18
  the same as #36, but thickness is 0,18mm (.007"), packaged 24 per bag

  5.40 $

• 

  CAHOZA Gear 72 pitch 41T, 16° angle, 3/32" axle, Ø15.06 mm (Ø.593") - #4

  CAHOZA Gear 72 pitch 41T, 16° angle, 3/32" axle,  Ø15.06 mm (Ø.593") - #4

  polymer gears 72 pitch, for 3/32" axle, 41, 42, 43, 44 teeth angled by 16°, especially shaped teeth works perfectly with any pinion

  5.40 $

• 

  CAHOZA Highly durable gear Corrected 72 pitch 38 teeth, 0° angle, 3/32" axle, Ø14.52 mm (.570") - #5-BC

  CAHOZA Highly durable gear Corrected 72 pitch 38 teeth, 0° angle, 3/32" axle, Ø14.52 mm (.570") - #5-BC

  highly durable polymer gears 72 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, tooth shape corrected so this gear has the same diameter as 39T,

  6.40 $

• 

  CAHOZA Gear 64 pitch, 36T, 0° angle, 3/32" axle, Ø15.02 mm (Ø.591") - #6

  CAHOZA Gear 64 pitch, 36T, 0° angle, 3/32" axle, Ø15.02 mm (Ø.591") - #6

  Polymer gears 64 pitch, for 3/32" axle, but only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester,

  5.20 $

• 

  CAHOZA Low profile long cut down nylon elastic guide, colorless, w/out thread - #337

  CAHOZA Low profile long cut down nylon elastic guide, colorless, w/out thread - #337

  long cut down guide for integral guide tongue chassis, lenght 26.8 mm, special shape of keel (see picture), content: colorless nylon, glass fibre, these guides have higher content of glass fibre, they are more tough, very precise, high quality material used, ideal for wing classes

  4.60 $

• 

  CAHOZA G12 C-Can setup type UL - bevelled - #242-ULB

  Cahoza C-can setup, assembled using:

  • Cahoza C-can #252, 
  • Cahoza Tornado 5 bevelled magnets, 
  • Cahoza endbell #262, 
  • Cahoza spring cups, 
  • 2x5 precisely turned oilite in endbell, ball bearing in can, 
  • Cahoza screws,
  • for .518" armatures, Koford ones are recommended, 
  • professionaly assembled, 
  • weight 10.8 grammes

  112.40 $

• 

  CAHOZA Phenolic insulators, ID 1,5 mm, OD 3 mm, thick. .012" (0,3 mm), 1 pc. - #159

  CAHOZA Phenolic insulators, ID 1,5 mm, OD 3 mm, thick. .012" (0,3 mm), 1 pc. - #159

  use on all aluminium endbells, suitable for anodised spring posts #154, #157, inside diameter 1,5mm, outside diameter 3mm, thickness 0,3mm, packed by 24pcs

  0.24 $

• 

  CAHOZA Phenolic insulators, ID 1,5 mm, OD 3 mm, thick. .012" (0,3 mm), 24 pcs. - #159

  CAHOZA Phenolic insulators, ID 1,5 mm, OD 3 mm, thick. .012" (0,3 mm), 24 pcs. - #159

  use on all aluminium endbells, suitable for anodised spring posts #154, #157, inside diameter 1,5mm, outside diameter 3mm, thickness 0,3mm, packed by 24pcs

  6.70 $

• 

  CAHOZA Ø3/32" (2.36 mm) AXLE (length 53.1 mm) - #23

  SOLID AXLE 3/32
  solid 3/32" axle, highly durable 60HRc, axle is very fine grinded and polished, the 3/32" diameter is very accurate with maximum deflection of 0,001 mm (.00004"), great straightness along the entire length, it is crooked to max. 0,005 mm (.0002") throughout the entire length, ends are also grinded, exact diameter of this axle is 2,371 mm (.093346"), the best axle ever available for profi racing

  5.80 $

• 

  CAHOZA Gear 64 pitch, 36T, 15° angle, 3/32" axle, Ø15.00 mm (Ø.590") - #11-S

  CAHOZA Gear 64 pitch, 36T, 15° angle, 3/32" axle, Ø15.00 mm (Ø.590") - #11-S

  Polymer gears 64 pitch, for 3/32" axle, angled 15°, selected ones, high quality and accuracy, for demanding racers, tested on our roll tester

  5.40 $

• 

  CAHOZA Low profile long cut down nylon elastic guide, straight keel, violet, w/out thread - #339

  CAHOZA Low profile long cut down nylon elastic guide, straight keel, violet, w/out thread - #339

  Upgraded version of long cut down guide (#336) for integral guide tongue chassis, lenght 26.8 mm, straight keel (see picture), content: violet nylon, glass fibre, these guides have higher content of glass fibre, they are more tough, very precise, high quality material used

  5.00 $

• 

  CAHOZA LIGHT PROFILE ENDBELLS - #257

  New polymer light profile endbells for Cahoza C-can, available in 4 colors, weight only 0,7 grams

  7.00 $

• 

  CAHOZA 3/32" (2.36 mm), .012" (0,3 mm) THICK, BRONZE AXLE SPACER, 24 pcs. - #35

  PHOSPHOR BRONZE SPACERS 3/32 phosphor bronze axle spacers, 0,25mm (.01"), very hard but will not stick to magnets, packaged 24 per bag

  5.20 $

• 

  CAHOZA Highly durable gear 72 pitch 38 teeth, 0° angle, 2 mm axle, Ø14.15 mm (Ø.557") - #5-B-2

  CAHOZA Highly durable gear 72 pitch 38 teeth, 0° angle, 2 mm axle, Ø14.15 mm (Ø.557") - #5-B-2

  highly durable polymer gears 72 pitch, for 2mm axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant

  6.40 $

• 

  CAHOZA Black covered pinion 72 pitch 5 teeth, 0° angle 1.5 mm bore - #17

  CAHOZA Black covered pinion 72 pitch 5 teeth, 0° angle 1.5 mm bore - #17

  EDM pinions 72 pitch 5T - 1,5mm hole, very accurate, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 72 pitch gears

  34.00 $

• 

  CAHOZA Black covered pinion 72 pitch 6 teeth, 0° angle 1.5 mm bore - #14

  CAHOZA Black covered pinion 72 pitch 6 teeth, 0° angle 1.5 mm bore - #14

  EDM pinions 72 pitch 6T - 1,5mm hole, very accurate, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 72 pitch gears

  34.00 $

• 

  CAHOZA Black covered pinion 72 pitch 6 teeth, 0° angle 1.2 mm bore - #14A

  CAHOZA Black covered pinion 72 pitch 6 teeth, 0° angle 1.2 mm bore - #14A

  EDM pinions 72 pitch 6T - 1,2mm hole, very accurate, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 72 pitch gears

  34.00 $

• 

  CAHOZA Highly durable gear Corrected 72 pitch 38 teeth, 0° angle, 2 mm axle, Ø14.50 mm (Ø.570") - #5-BC-2

  CAHOZA Highly durable gear Corrected 72 pitch 38 teeth, 0° angle, 2 mm axle, Ø14.50 mm (Ø.570") - #5-BC-2

  highly durable polymer gears 72 pitch, for 2mm axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, tooth shape corrected so this gear has the same diameter as 39T, available in 38 teeth

  6.40 $

• 

  CAHOZA Highly durable gear 72 pitch 39 teeth, 0° angle, 3/32" axle, Ø14.50 mm (Ø.570")- #5-B

  CAHOZA Highly durable gear 72 pitch 39 teeth, 0° angle, 3/32" axle, Ø14.50 mm  (Ø.570")- #5-B

  highly durable polymer gears 72 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant

  6.40 $

• 

  CAHOZA 9MM GUIDE NUTS - #31-1

  GUIDE NUTS 9MM
  aluminium guide nuts, professionaly made on a CNC machine, including the hexagon shape, absolutely precise, size is 9mm (.354"), packaged 10pcs per bag

  2.00 $

• 

  CAHOZA 9MM GUIDE NUTS, 10 pc - #31

  GUIDE NUTS 9MM
  aluminium guide nuts, professionaly made on a CNC machine, including the hexagon shape, absolutely precise, size is 9mm (.354"), packaged 10pcs per bag

  16.80 $

• 

  CAHOZA Gear 72 pitch, 42T, 16° angle, 3/32" axle, Ø15.38 mm (Ø.605") - #4

  CAHOZA Gear 72 pitch, 42T, 16° angle, 3/32" axle, Ø15.38 mm (Ø.605") - #4

  polymer gears 72 pitch, for 3/32" axle, 41, 42, 43, 44 teeth angled by 16°, especially shaped teeth works perfectly with any pinion

  5.40 $

• 

  CAHOZA Highly durable gear 72 pitch, 42T, 16° angle, big hub, 3/32" axle, Ø15.38 mm (Ø.605") - #4-B

  CAHOZA Highly durable gear 72 pitch, 42T, 16° angle, big hub, 3/32" axle, Ø15.38 mm (Ø.605") - #4-B

  Highly durable polymer gears 72 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, available in 41T, 42T, 43T and 44T, angled by 16°

  6.40 $

• 

  CAHOZA ARM (2 mm) SPACER BRONZE .012" (0,3 mm), 24 psc. - #38

  PHOSPHOR BRONZE SPACERS 0,3
  the same as #36, but thickness is 0,3mm (.0118"), packaged 24 per bag

  5.40 $

You viewed: