UHU PLUS 300 EPOXY RESIN ADHESIVE, Tube Binder, Tube Hardener
Quick Overview
- solvent free two-part epoxy resin adhesive for heavy-duty requirements (300kg/cm2)
- mix proportion: 1 part binder to 1 part hardener (by volume).
- working time (open time) approx. 90 minutes
- setting time and final strength depend on temperature.
- final strength up to 30N/mm2
- time resistant, impact resistant and water resistant
Details
UHU plus endfest 300 is a solvent free, universal 2-component epoxy resin adhesive for heavy-duty requirements. Approximately working time is 90 minutes. The setting time and final strength (up to 3000N/cm2) dependent on temperature. At room temperature uhu plus endfest 300 hardens after 12 hours. UHU plus endfest 300 epoxy is resistant to age, humidity and also shock-resistant.
Hardening Time of UHU PLUS ENDFEST 300
| Temperature | Hardening Time | Bond strength* (10 N/cm2 = 1kg/cm2) |
| 20°C | 12 hrs. | 1200 N/cm2 |
| 40°C | 3 hrs. | 1800 N/cm2 |
| 70°C | 45 mins. | 2000 N/cm2 |
| 100°C | 10 mins. | 2500 N/cm2 |
| 180°C | 5 mins. | 3000 N/cm2 |
*at combined tension and shear strain for aluminium.
After the two components of UHU plus endfest 300 have been mixed, the adhesive hardens with almost no loss of volume to form a duroplastic synthetic resin. The parts to be assembled usually need to be fixed under pressure. Extreme pressure It is not necessary. Hardening takes place by evaporation. The working consistency is designed to achieve a good bond at room temperature with a minimal amount of movement.
For more information you can visit the following link: http://www.uhu-profishop.com/uhu-plus-300-epoxy-resin-adhesive-tube-binder-tube-hardener-33g.html
Additional Information
| EAN | 4026700456400 |
|---|---|
| Suitable materials | Glues metal, glass, porcelain, ceramic, wood, marble, stone, concrete, thermosets, glass fiber, reinforced plastics, hard-pvc, rubber, Styrofoam® and more. |
| Unsuitable materials | Not suitable for large glass surfaces, PE or PP. |
| Loading | High, Low, Medium |
| Resistance | Acid, Gasolin, Lye, Oil, Water |
| Temperature range | - 40°C up to + 100°C (higher temperatures possible - depending on material and construction) |
| Processing | Surfaces must be dry and free of dust and grease. Roughen smooth surfaces. Mix 1 part binder with 1 part hardener (equal lengths of strands). Apply adhesive to one side, or to both sides for rough materials. Place the parts together in exactly the right position without applying pressure. |
| Packing | Tube Binder (18g/15ml) und Tube Härter (15g/15ml) sowie eine Mischwanne mit Spatel |
| Chemical basis | Epoxidharz |
| Viscosity | highly viscous, medium viscous |
| Working life | approx. 90 minutes |
| Bonding process | Wet application |
| Customs tariff number (HS-Code) | 35061000 |
Comments
There are no comments