Tire Donuts
-
ZHB REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 33 mm, pair
REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 33 mm, pair
Suitable for the model with any height of the rear axle, if necessary, you need to remove the "crust" on the machine for processing tires or lathe.
PARAMETERS
- Inside dia., mm: 9,5
- Outside dia., mm: ~ 33
- Width, mm: 22
This tires cut for GM & F1/24 (Nesterenko)
-
ZHB REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 25 mm, pair
REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 25 mm, pair
Suitable for the model with any height of the rear axle, if necessary, you need to remove the "crust" on the machine for processing tires or lathe.
PARAMETERS
- Inside dia., mm: 9,5
- Outside dia., mm: ~ 25
- Width, mm: 22
This tires cut for GM & F1/24 (Nesterenko)
-
ALPHA Rear wheel donuts GREEN, treated, pair - #GREENT
ALPHA Rear wheel donuts GREEN, treated, pair - #GREENT
1 pair of green treated tires for Production 1/32 or other classes
-
ALPHA REAR WHEEL TIRES SBR BEIGE, pair - #NATURAL
ALPHA REAR WHEEL TIRES SBR BEIGE, pair
1 pair of orange tires for Production 1/32 or other classes
-
Donuts EARacing, inside Ø 9.5 mm, outside ~ Ø 22 mm, length ~ 23 mm, pair
Good grip donuts for club races.
Better alternative for Pirania Light and Super Natural.
-
ALPHA Rear wheel donuts GREEN, pair - #GREEN
ALPHA Rear wheel donuts GREEN, pair - #GREEN
1 pair of green tires for Production 1/32 or other classes
-
JK Rear wheel tires D4 0.375"ID x 0.850"OD Natural Donut, pair - #DS/L
JK Rear wheel tires D4 "natural donut", pair - #DS/L
PARAMETERS
- Inside dia., mm: 9,5
- Outside dia., mm: 21,5
- Made for rims, dia., mm: 10
These tires can use in all classes
Old catalog #JKP-D4
-
MID AMERICA Donuts inside Ø8.9 mm (.350"), outside Ø 20.2 mm (.796"), about 31.5 mm (1.241") width, pair - #MID803
MID AMERICA Donuts inside Ø 8.9 mm (.350"), outside Ø 21.1 mm (.830"), about 23.6 mm (.930") width, pair - #MID803
Natural (fish rubber) Scale Racing donuts. Super Soft and Bitey Rubber.
-
JK Front wheel donuts, 0.375"ID (9,52 mm) x 0.850"OD (21,6 mm), firm, pair - #D1F
JK Front wheel donuts, 0.375"ID (9,52 mm) x 0.850"OD (21,6 mm), firm, pair - #D1F
PARAMETERS
- Inside dia., in (mm): .375 (9,52)
- Outside dia., in (mm): .850 (21,6)
-
JK Natural rubber donuts (JKP-D5) inside Ø10,8 mm (.425"), outside Ø24,76 mm (.975"), pair - #DML/LB
JK Natural rubber donuts (JKP-D5)
PARAMETERS
- Inside dia.: 10,8 mm (.425")
- Outside dia.: 24,76 mm (.975").
Old catalog #JKP-D5
-
BSV LUXURY FISH donuts inside Ø 13.7 mm (.540"), outside Ø 24.1 mm (.949"), about 19.7 mm (.748") width, pair
BSV LUXURY FISH donuts inside Ø 13.7 mm (.540"), outside Ø 24.1 mm (.949"), about 19.7 mm (.748") width, pair
-
-
SLOT FOX Drag racing donuts, inside Ø 15,24 mm (.600"), outside Ø 34,34 mm (1.352"), about 17,78 mm (.700") width, pair - #SF70100
SLOT FOX Drag racing donuts, inside Ø 15,24 mm (.600"), outside Ø 34,34 mm (1.352"), about 17,78 mm (.700") width, pair
1 Pair Slot Fox Natural Rubber Donuts for Drag Racing, Replace worn out drag tires and keep your expensive hubs without replacement cost.
-
BSV LUXURY Donuts, inside Ø 9.3 mm (.370"), outside about Ø 19 mm (.750"), about 34 mm (1.338") width, pair
BSV LUXURY Donuts, inside Ø 9 mm (.354"), outside Ø 22 mm (.866"), about 34 mm (1.338") width, pair
Good for Production & Eurosport.
-
BSV LUXURY Donuts, inside Ø 10.2 mm (.400"), outside Ø 21.5 mm (.854"), about 34 mm (1.338") width, pair
BSV LUXURY Donuts, inside Ø 9 mm (.354"), outside Ø 22 mm (.866"), about 34 mm (1.338") width, pair
Good for Production & Eurosport.
-
"Wide one", outside about Ø 23.5 mm (.925"), about 32.5 mm (1.280") width, pair
KLINGON Donuts, inside Ø mm, outside about Ø 23.5 mm (.925"), about 32.5 mm (1.280") width, pair
-
MID AMERICA Premium FISH donuts inside Ø7.62 mm (.300"), outside Ø17.52 mm (.690"), about 31 mm (1.2") width, pair - #MID808A
MID AMERICA Premium FISH donuts inside Ø7.62 mm (.300"), outside Ø17.52 mm (.690"), about 31 mm (1.2") width, pair - #MID808A
Tiny pores, very firm, super sticky
-
MID AMERICA Premium FISH donuts inside Ø8.9 mm (.350"), outside Ø18.29 mm (.720"), about 31 mm (1.2") width, pair - #MID808B
MID AMERICA Premium FISH donuts inside Ø8.9 mm (.350"), outside Ø18.29 mm (.720"), about 31 mm (1.2") width, pair - #MID808B
Tiny pores, very firm, super sticky
-
MID AMERICA Premium FISH donuts inside Ø8.9 mm (.350"), outside Ø22.86 mm (.900"), about 31 mm (1.2") width, pair - #MID808C
MID AMERICA Premium FISH donuts inside Ø8.9 mm (.350"), outside Ø22.86 mm (.900"), about 31 mm (1.2") width, pair - #MID808C
Tiny pores, very firm, super sticky
-
MID AMERICA Premium FISH donuts inside Ø11.5 mm (.450"), outside Ø22.09 mm (.870"), about 31 mm (1.2") width, pair - #MID808D
MID AMERICA Premium FISH donuts inside Ø11.5 mm (.450"), outside Ø22.09 mm (.870"), about 31 mm (1.2") width, pair - #MID808D
Tiny pores, very firm, super sticky
-
MID AMERICA Premium FISH donuts inside Ø7.62 mm (.300"), outside Ø17.52 mm (.690"), about 31 mm (1.2") width, 10 pairs - #MID808A
MID AMERICA Premium FISH donuts inside Ø7.62 mm (.300"), outside Ø17.52 mm (.690"), about 31 mm (1.2") width, 10 pairs - #MID808A
Tiny pores, very firm, super sticky
-
MID AMERICA Premium FISH donuts inside Ø8.9 mm (.350"), outside Ø18.29 mm (.720"), about 31 mm (1.2") width, 10 pairs - #MID808B
MID AMERICA Premium FISH donuts inside Ø8.9 mm (.350"), outside Ø18.29 mm (.720"), about 31 mm (1.2") width, 10 pairs - #MID808B
Tiny pores, very firm, super sticky
-
MID AMERICA Premium FISH donuts inside Ø8.9 mm (.350"), outside Ø22.86 mm (.900"), about 31 mm (1.2") width, pair, 10 pairs - #MID808C
MID AMERICA Premium FISH donuts inside Ø8.9 mm (.350"), outside Ø22.86 mm (.900"), about 31 mm (1.2") width, pair, 10 pairs - #MID808C
Tiny pores, very firm, super sticky
-
MID AMERICA Premium FISH donuts inside Ø11.5 mm (.450"), outside Ø22.09 mm (.870"), about 31 mm (1.2") width, 10 pairs - #MID808D
MID AMERICA Premium FISH donuts inside Ø11.5 mm (.450"), outside Ø22.09 mm (.870"), about 31 mm (1.2") width, 10 pairs - #MID808D
Tiny pores, very firm, super sticky