TAMIYA spray paints for polycarbonate (lexan) & masking tape TAMIYA
Tamiya
These spray paints were especially developed for decorating transparent polycarbonate bodies used in SRC & R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing the model. Paint the body from the inside, keeping the can about 30 cm from the surface. After curing, apply another coat. Small details should be brush painted beforehand, using Tamiya bottle paints for polycarbonate. These paints are impervious to oil and fuels, so they can be safely used on glow engine R/C car bodies.
*Under the special order is possible delivery of almost any catalog position TAMIYA, including models and accessories for RC. Make a request with the catalog number & quantity on the e-mail: distibution@dubick.pro or use the feedback form in the «CONTACTS» http://slotracingshop.com/en/contact section.
Tamiya
Tamiya is a Japanese manufacturer of plastic model kits, radio controlled cars, battery- and solar-powered educational models, sailboat models, acrylic and enamel model paints, and various modeling tools and supplies. The company was founded by Yoshio Tamiya in Shizuoka, Japan, in 1946.
Under the special order is possible delivery of almost any catalog position TAMIYA, including models and accessories for RC. Make a request with the catalog number & quantity on the e-mail: distibution@dubick.pro or use the feedback form in the «CONTACTS» http://slotracingshop.com/en/contact section.
You can find full Tamiya on-line catalog here: http://www.tamiya.com/english/products/archive.htm
PS spray paints were especially developed for decorating transparent polycarbonate bodies used in SRC & R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing the model. Paint the body from the inside, keeping the can about 30 cm from the surface. After curing, apply another coat. Small details should be brush painted beforehand, using Tamiya bottle paints for polycarbonate. These paints are impervious to oil and fuels, so they can be safely used on glow engine R/C car bodies.
-
TAMIYA Masking tape for curves, width 2 mm - #TAM87177
TAMIYA Masking tape for curves, width 2 mm
Length of roll: 20m
A soft resin material is used, allowing the tape to adhere in a curved line while preventing paint from seeping into masked off areas.
Use of narrower tape is recommended for sharper curves. -
TAMIYA Masking tape for curves, width 3 mm - #TAM87178
TAMIYA Masking tape for curves, width 3 mm
Length of roll: 20m
A soft resin material is used, allowing the tape to adhere in a curved line while preventing paint from seeping into masked off areas.
Use of narrower tape is recommended for sharper curves. -
TAMIYA Masking tape for curves, width 5 mm - #TAM87179
TAMIYA Masking tape for curves, width 5 mm
Length of roll: 20m
A soft resin material is used, allowing the tape to adhere in a curved line while preventing paint from seeping into masked off areas.
Use of narrower tape is recommended for sharper curves. -
TAMIYA Masking tape, width 6 mm - #TAM87030
TAMIYA Masking tape, width 6 mm
- It even adheres well to uneven surfaces, but is easy to remove.
- Has enough elasticity to work well on curves and small edges.
- Paint does not bleed though the tape.
Comes in its own dispenser with cutter to avoid rough edges.
-
TAMIYA Masking tape, width 10 mm - #TAM87031
TAMIYA Masking tape, width 10 mm
- It even adheres well to uneven surfaces, but is easy to remove.
- Has enough elasticity to work well on curves and small edges.
- Paint does not bleed though the tape.
Comes in its own dispenser with cutter to avoid rough edges.
-
TAMIYA Masking tape for curves, width 12 mm - #TAM87184
TAMIYA Masking tape for curves, width 12 mm
Length of roll: 20m
A soft resin material is used, allowing the tape to adhere in a curved line while preventing paint from seeping into masked off areas.
Use of narrower tape is recommended for sharper curves. -
TAMIYA Masking tape refill, width 18 mm - #87035
TAMIYA Masking tape refill, width 18 mm - #87035
-
TAMIYA Masking tape, width 40 mm - #87063
TAMIYA Masking tape, width 40 mm - #87063
Tamiya Masking Tape is thin, very strong adhesive tape for modelling use.
-
TAMIYA PS-1 WHITE - #TAM86001
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-2 RED - #TAM86002
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-3 LIGHT BLUE - #TAM86003
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-4 BLUE - #TAM86004
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-5 BLACK - # TAM86005
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-6 YELLOW - #TAM86006
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-7 ORANGE - #TAM86007
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-8 LIGHT GREEN - #TAM86008
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-9 GREEN - #TAM86009
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-10 PURPLE - #TAM86010
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-11 PINK - #TAM86011
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-12 SILVER - #TAM86012
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-13 GOLD - #TAM86013
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-14 COPPER - #TAM86014
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-15 METALLIC RED - TAM86015
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-16 METALLIC BLUE - #TAM86016
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.