Wheels, Tire Donuts, Rims
-
BSV LUXURY FISH donuts inside Ø 13.7 mm (.540"), outside Ø 24.1 mm (.949"), about 19.7 mm (.748") width, pair
BSV LUXURY FISH donuts inside Ø 13.7 mm (.540"), outside Ø 24.1 mm (.949"), about 19.7 mm (.748") width, pair
-
BSV LUXURY Donuts, inside Ø 10.2 mm (.400"), outside Ø 21.5 mm (.854"), about 34 mm (1.338") width, pair
BSV LUXURY Donuts, inside Ø 9 mm (.354"), outside Ø 22 mm (.866"), about 34 mm (1.338") width, pair
Good for Production & Eurosport.
-
ZHB REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 25 mm, pair
REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 25 mm, pair
Suitable for the model with any height of the rear axle, if necessary, you need to remove the "crust" on the machine for processing tires or lathe.
PARAMETERS
- Inside dia., mm: 9,5
- Outside dia., mm: ~ 25
- Width, mm: 22
This tires cut for GM & F1/24 (Nesterenko)
-
ZHB REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 33 mm, pair
REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 33 mm, pair
Suitable for the model with any height of the rear axle, if necessary, you need to remove the "crust" on the machine for processing tires or lathe.
PARAMETERS
- Inside dia., mm: 9,5
- Outside dia., mm: ~ 33
- Width, mm: 22
This tires cut for GM & F1/24 (Nesterenko)
-
Donuts EARacing, inside Ø 9.5 mm, outside ~ Ø 22 mm, length ~ 23 mm, pair
Good grip donuts for club races.
Better alternative for Pirania Light and Super Natural.
-
ALPHA Rear wheel donuts GREEN, treated, pair - #GREENT
ALPHA Rear wheel donuts GREEN, treated, pair - #GREENT
1 pair of green treated tires for Production 1/32 or other classes
-
MID AMERICA Premium FISH donuts inside Ø10.9 mm (.430"), outside Ø22.09 mm (.870"), about 31 mm (1.2") width, 10 pairs - #MID808D
MID AMERICA Premium FISH donuts inside Ø10.9 mm (.430"), outside Ø22.09 mm (.870"), about 31 mm (1.2") width, 10 pairs - #MID808D
Fit for 11 mm rims
Tiny pores, very firm, super sticky
-
ALPHA Rear wheel donuts GREEN, pair - #GREEN
ALPHA Rear wheel donuts GREEN, pair - #GREEN
1 pair of green tires for Production 1/32 or other classes
-
TAYLORACING FRONT WHEEL STICKERS, set for 20 bodies, cut out along the counter - #006
FRONT WHEEL STICKERS, set for 20 bodies, cut out along the counter - #006
Very convenient stickers for preparing your bodies for the passage of a technical commission
-
S&K FRONT RIMS FOR TEAPOT MODELS (TA 1/24), 1 PAIR - #540
FRONT RIMS FOR TEAPOR MODELS (TA 1/24), 1 PAIR - #540
This rims is made for pressing on the axle!
PARAMETERS
- dia., mm: 14
- width for gluing tires, mm: 5,5
- total width, mm: 12
- dia. of holes for set on axle Ø2 mm., mm : 1,8
-
ALPHA REAR WHEEL TIRES SBR BEIGE, pair - #NATURAL
ALPHA REAR WHEEL TIRES SBR BEIGE, pair
1 pair of orange tires for Production 1/32 or other classes
-
BSV Plastic rims for 3/32" axle, width 20 mm, Ø9.5 mm, ultra light - #BSV209,5332lig
BSV Plastic rims
- For 3/32" axle;
- Width 20 mm;
- Dia. 9.5 mm;
- Ultra light.
-
BSV Plastic rims for 3/32" axle, width 20 mm, Ø9.5 mm, w/offset of the hub, ultra light - #BSV209,5332ligof
BSV Plastic rims
- For 3/32" axle;
- Width 20 mm;
- Dia. 9.5 mm;
- W/offset of the hub;
- Ultra light.
-
BSV LUXURY Donuts, inside Ø 9.3 mm (.370"), outside about Ø 19 mm (.750"), about 34 mm (1.338") width, pair
BSV LUXURY Donuts, inside Ø 9 mm (.354"), outside Ø 22 mm (.866"), about 34 mm (1.338") width, pair
Good for Production & Eurosport.
-
JK Front wheel donuts, 0.375"ID (9,52 mm) x 0.850"OD (21,6 mm), firm, pair - #D1F
JK Front wheel donuts, 0.375"ID (9,52 mm) x 0.850"OD (21,6 mm), firm, pair - #D1F
PARAMETERS
- Inside dia., in (mm): .375 (9,52)
- Outside dia., in (mm): .850 (21,6)
-
MID AMERICA Carbon fiber rims for 3/32" axle, width .810" (20 mm), Ø.370" (9.5 mm) - #MID850
MID AMERICA Carbon fiber rims - #MID850
- For 3/32" axle;
- width .810" (20 mm);
- Dia. .370" (9.5 mm);
-
MID AMERICA Carbon fiber rims for 3/32" axle, width .810" (20 mm), Ø.370" (9.5 mm), 1 cd. (6 pairs) - #MID850
MID AMERICA Carbon fiber rims, 1 cd. (6 pairs) - #MID850
- For 3/32" axle;
- width .810" (20 mm);
- Dia. .370" (9.5 mm);
-
S&K PLASTIC RIMS FOR 3/32" axle, width 20 mm, Ø9.5 mm, ultra light (1,55 gr/pair) - #SK9520
S&K PLASTIC RIMS, ultra light (1,55 gr/pair) - #SK9520
PARAMETERS
- axle, mm.: 2,36
- width, mm: 20
- dia.,mm: 9,5
- weight per pair, gr/pair: 1,55
-
BSV Plastic rims for 2 mm axle, width 16 mm, Ø9.5 mm, ultra light - #BSV169,52lig
BSV Plastic rims
- For 2 mm axle;
- Width 16 mm;
- Dia. 9.5 mm;
- Ultra light.
-
BSV Plastic rims for 2 mm axle, width 16 mm, Ø9.5 mm, w/offset of the hub, ultra light - #BSV169,52ligof
BSV Plastic rims
- For 2 mm axle;
- Width 16 mm;
- Dia. 9.5 mm;
- W/offset of the hub for ES 1/32 & Production 1/32
- Ultra light.
-
S&K PLASTIC RIMS FOR 2 mm axle, width 16 mm, Ø9.5 mm, ultra light(1,38 gr/pair)
PARAMETERS
- axle, mm: 2
- width, mm: 16
- dia., mm: 9,5
- weight per pair, gr/pair: 1,38
-
BSV Plastic rims for 2 mm axle, width 20 mm, Ø9.5 mm, ultra light - #BSV209,52lig
BSV Plastic rims
- For 2 mm axle;
- Width 20 mm;
- Dia. 9.5 mm;
- Ultra light.
-
S&K PLASTIC RIMS FOR 2 mm axle, width 20 mm, Ø9.5 mm, ultra light (1,58 gr/pair)
PARAMETERS
- axle, mm: 2
- width, mm: 20
- dia.,mm: 9,5
- weight per pair, gr/pair: 1,58
-
BSV Plastic rims for 3/32" axle, width 16 mm, Ø9.5 mm, ultra light - #BSV169,5332lig
BSV Plastic rims
- For 3/32" axle;
- Width 16 mm;
- Dia. 9.5 mm;
- Ultra light.
-
BSV Plastic rims for 3/32" axle, width 16 mm, Ø9.5 mm, w/offset of the hub, ultra light - #BSV169,5332ligof
BSV Plastic rims
- For 3/32" axle;
- Width 16 mm;
- Dia. 9.5 mm;
- W/offset of the hub for ES 1/32 & Production 1/32
- Ultra light.
-
S&K PLASTIC RIMS FOR 3/32" axle, width 16 mm, Ø9.5 mm, ultra light(1,32 gr/pair)
PARAMETERS
- axle, mm.: 2,36
- width, mm: 16
- dia.,mm: 9,5
- weight per pair, gr/pair: 1,32
ON PHOTO RIMS WIDTH 20 MM!!
-
KLINGON Donuts, inside Ø about 9.0 mm, outside Ø 21.5 mm, about 19.5 - 19.9 mm width, pair
KLINGON Donuts, inside Ø about 9.0 mm, outside Ø 21.5 mm, about 19.5 - 19.9 mm width, pair
Width is about 19.5 mm till 19.9 mm.
You can use this donuts in 1/24 scale if you can mounting them very precision.
-
-
"Wide one", outside about Ø 23.5 mm (.925"), about 32.5 mm (1.280") width, pair
KLINGON Donuts, inside Ø mm, outside about Ø 23.5 mm (.925"), about 32.5 mm (1.280") width, pair
-
JK Plastic rims for 3/32" axle, width 20 mm, Ø.400" (10.15 mm) - #R3S
JKP Plastic rims #R3S
- For 3/32" axle;
- Width 20 mm;
- Dia. .400" (10.15 mm).
Old catalog #JKR021
-
BSV Plastic rims for 2 mm axle, width 20 mm, Ø10.2 mm, ultra light - #BSV2010,22lig
BSV Plastic rims
- For 2 mm axle;
- Width 20 mm;
- Dia. 10.2 mm;
- Ultra light.
-
BSV Plastic rims for 3/32" axle, width 20 mm, Ø10.2 mm, ultra light - #BSV2010,2332lig
BSV Plastic rims
- For 3/32" axle;
- Width 20 mm;
- Dia. 10.2 mm;
- Ultra light.
-
BSV Plastic rims for 3/32" axle, width 20 mm, Ø10.2 mm, w/offset of the hub, ultra light - #BSV2010,2332ligof
BSV Plastic rims
- For 3/32" axle;
- Width 20 mm;
- Dia. 10.2 mm;
- W/offset of the hub;
- Ultra light.
-
JK PLASTIC RIMS FOR 3/32" axle, width 20 mm, Ø10.2 mm - #JKR021-I
PARAMETERS
- axle: 3/32" (2,36 mm)
- width, mm: 20
- dia.,mm: 10,2
-
BSV Plastic rims for 2 mm axle, width 16 mm, Ø10.2 mm, ultra light - #BSV1610,22lig
BSV Plastic rims
- For 2 mm axle;
- Width 16 mm;
- Dia. 10.2 mm;
- Ultra light.
-
BSV Plastic rims for 3/32" axle, width 16 mm, Ø10.2 mm, ultra light - #BSV1610,2332lig
BSV Plastic rims
- For 3/32" axle;
- Width 16 mm;
- Dia. 10.2 mm;
- Ultra light.
-
BSV Plastic rims for 3/32" axle, width 16 mm, Ø10.2 mm, w/offset of the hub, ultra light - #BSV1610,2332ligof
BSV Plastic rims
- For 3/32" axle;
- Width 16 mm;
- Dia. 10,2 mm;
- W/offset of the hub for ES 1/32 & Production 1/32
- Ultra light.
-
JK PLASTIC RIMS FOR 2 mm axle, width 20 mm, Ø10,2 mm - #R2S
JK PLASTIC RIMS #R2S
PARAMETERS
- axle, mm: 2
- width, mm: 20
- dia.,mm: 10,2
Old catalog #JKR021-2A
-
S&K PLASTIC RIMS FOR 3/32" axle, width 20 mm, Ø10.5 mm, (2,2 gr/pair) - #SK10520S
S&K PLASTIC RIMS, (2,2 gr/pair) - #SK10520S
PARAMETERS
- axle, mm.: 2,36
- width, mm: 20
- dia.,mm: 10,5
- weight per pair, gr/pair: 2,2
-
BSV Plastic rims for 2 mm axle, width 16 mm, Ø10.2 mm, w/offset of the hub, ultra light - #BSV1610,22ligof
BSV Plastic rims
- For 2 mm axle;
- Width 16 mm;
- Dia. 10,2 mm;
- W/offset of the hub for ES 1/32 & Production 1/32
- Ultra light.
-
S&K PLASTIC RIMS FOR 3/32" axle, width 16 mm, Ø10.5 mm, standard (1,83 gr/pair)
PARAMETERS
- axle, mm.: 2,36
- width, mm: 16
- dia.,mm: 10,5
- weight per pair, gr/pair: 1,83
-
B52 Magnesium rims for 2 mm axle, width 20 mm, Ø.393" (10.2 mm), 1.38 g. per pair
B52 Magnesium rims
- For 2 mm axle;
- Width 20 mm;
- Dia. .393" (10.2 mm);
- 1.38 g. per pair
-
BSV Plastic rims for 3/32" axle, width 16 mm, Ø10.5 mm, (2.01 g. per pair) - #BSV1610,5
BSV Plastic rims
- For 3/32" axle;
- Width 16 mm;
- Dia. 10.5 mm;
- 2.01 g. per pair.
-
BSV Plastic rims for 3/32" axle, width 16 mm, Ø10.5 mm, w/offset of the hub, (1.96 g. per pair) - #BSV1610,5of
BSV Plastic rims
- For 3/32" axle;
- Width 16 mm;
- Dia. 10.5 mm;
- W/offset of the hub for ES 1/32 & Production 1/32;
- 1.96 g. per pair.
-
S&K PLASTIC RIMS FOR 3/32" axle, width 16 mm, Ø10.5 mm,ultraweight (1,57 gr/pair) - #SK10516
PARAMETERS
- axle, mm.: 2,36
- width, mm: 16
- dia.,mm: 10,5
- weight per pair, gr/pair: 1,57
-
S&K PLASTIC RIMS FOR 3/32" axle, width 16 mm, Ø10.5 mm,w/offset of the hub for ES 1/32 & Production 1/32, ultra light (1,6 gr/pair)
PARAMETERS
- axle, mm: 2,36
- width, mm: 16
- dia.,mm: 10,5
- weight per pair, gr/pair: 1,6
- with offset of hub for ES 1/32 & Production 1/32
-
ZHB FRONT RUBBER TIRES, pair
FRONT RUBBER TIRES for production 1/32 & 1/24. (Best with front carbon axle)
-
DOSLOT Donuts inside Ø 9.1 mm (.358"), outside Ø 20 mm (.787"), about 24.6 mm (.968") width, pair
DOSLOT Donuts, pair
inside Ø 9.1 mm (.358"),
outside Ø 20 mm (.787"),
about 24.6 mm (.968") width.
-
MID AMERICA Model wheels 3/32" axle, .760" (19.3 mm), on plastic rims, full hub, FISH small, pair - #MID01F
MID AMERICA Model wheels, pair - #MID01F
PARAMETERS
- Axle: 3/32" (2,36 mm)
- Dia.: .760" (19.3 mm)
- Rims material: plastic
- Tire: FISH
- For classes scale: 1/32
-
MID AMERICA Model wheels 3/32" axle, .720" (18.3 mm) dia., on plastic rims, full hub, FISH small, pair - #MID00F
MID AMERICA Model wheels, pair - #MID00F
PARAMETERS
- Axle: 3/32" (2,36 mm)
- Dia.: .720" (18.3 mm)
- Rims material: plastic
- Tire: FISH
- For classes scale: 1/32
-
MID AMERICA Model wheels 3/32" axle, .720" (18.3 mm) dia., on magnesium rims, full hub, FISH medium, pair - #MID20F
MID AMERICA Model wheels, pair - #MID20F
PARAMETERS
- Axle: 3/32" (2,36 mm)
- Dia.: .720" (18.3 mm)
- Rims material: magnesium
- Tire: FISH
- For classes scale: 1/32
-
B52 Magnesium rims for 2 mm axle, width 16 mm, Ø.393" (10.2 mm), 0.97 g. per pair
B52 Magnesium rims
- For 2 mm axle;
- Width 16 mm;
- Dia. .393" (10.2 mm);
- 0.97 g. per pair
-
BSV Plastic rims for 2 mm axle, width 20 mm, Ø10.5 mm - #BSV2010,52
BSV Plastic rims
- For 2 mm axle;
- Width 20 mm;
- Dia. 10.5 mm.
-
JK 5/8"D 1/16"A Front Wheel Plastic, O-ring, 5 Spoke (pr) - #T125O
JK 5/8"D 1/16"A Front Wheel Plastic, O-ring, 5 Spoke (pr) - #T125O
Old catalog #JK8724
-
MID AMERICA Premium FISH donuts inside Ø7.62 mm (.300"), outside Ø17.52 mm (.690"), about 31 mm (1.2") width, pair - #MID808A
MID AMERICA Premium FISH donuts inside Ø7.62 mm (.300"), outside Ø17.52 mm (.690"), about 31 mm (1.2") width, pair - #MID808A
Tiny pores, very firm, super sticky
-
MID AMERICA Premium FISH donuts inside Ø7.62 mm (.300"), outside Ø17.52 mm (.690"), about 31 mm (1.2") width, 10 pairs - #MID808A
MID AMERICA Premium FISH donuts inside Ø7.62 mm (.300"), outside Ø17.52 mm (.690"), about 31 mm (1.2") width, 10 pairs - #MID808A
Tiny pores, very firm, super sticky
-
MID AMERICA Premium FISH donuts inside Ø8.9 mm (.350"), outside Ø18.29 mm (.720"), about 31 mm (1.2") width, pair - #MID808B
MID AMERICA Premium FISH donuts inside Ø8.9 mm (.350"), outside Ø18.29 mm (.720"), about 31 mm (1.2") width, pair - #MID808B
Tiny pores, very firm, super sticky
-
MID AMERICA Premium FISH donuts inside Ø8.9 mm (.350"), outside Ø18.29 mm (.720"), about 31 mm (1.2") width, 10 pairs - #MID808B
MID AMERICA Premium FISH donuts inside Ø8.9 mm (.350"), outside Ø18.29 mm (.720"), about 31 mm (1.2") width, 10 pairs - #MID808B
Tiny pores, very firm, super sticky
-
MID AMERICA Premium FISH donuts inside Ø8.9 mm (.350"), outside Ø22.86 mm (.900"), about 31 mm (1.2") width, pair - #MID808C
MID AMERICA Premium FISH donuts inside Ø8.9 mm (.350"), outside Ø22.86 mm (.900"), about 31 mm (1.2") width, pair - #MID808C
Tiny pores, very firm, super sticky
-
MID AMERICA Premium FISH donuts inside Ø8.9 mm (.350"), outside Ø22.86 mm (.900"), about 31 mm (1.2") width, pair, 10 pairs - #MID808C
MID AMERICA Premium FISH donuts inside Ø8.9 mm (.350"), outside Ø22.86 mm (.900"), about 31 mm (1.2") width, pair, 10 pairs - #MID808C
Tiny pores, very firm, super sticky
-
MID AMERICA Premium FISH donuts inside Ø10.9 mm (.430"), outside Ø22.09 mm (.870"), about 31 mm (1.2") width, pair - #MID808D
MID AMERICA Premium FISH donuts inside Ø10.9 mm (.430"), outside Ø22.09 mm (.870"), about 31 mm (1.2") width, 10 pairs - #MID808D
Fit for 11 mm rims
Tiny pores, very firm, super sticky
-
S&K FRONT RIMS FOR F1/24 MODELS , 1 PAIR - #541
FRONT RIMS FOR F1/24 MODELS , 1 PAIR - #541
This rims is made for pressing on the axle!
PARAMETERS
- dia.,mm: 14
- width for gluing tires, mm: 13
- total width, mm: 17,9
- dia. of holes for set on axle Ø3/32" (2.36 mm), mm : 2,2
-
BSV Plastic rims for 2 mm axle, width 16 mm, Ø10.5 mm - #BSV1610,52
BSV Plastic rims
- For 2 mm axle;
- Width 16 mm;
- Dia. 10.5 mm.
-
BSV Plastic rims for 3/32" axle, width 20 mm, Ø10.5 mm, (2.37 g. per pair.) - #BSV2010,5
BSV Plastic rims
- For 3/32" axle;
- Width 20 mm;
- Dia. 10.5 mm;
- 2.37 g. per pair.
-
BSV Plastic rims for 2 mm axle, width 16 mm, Ø10.5 mm, w/offset of the hub - #BSV1610,52of
BSV Plastic rims
- For 2 mm axle;
- Width 16 mm;
- Dia. 10.5 mm;
- W/offset of the hub for ES 1/32 & Production 1/32.
-
MID AMERICA Carbon fiber rims for 3/32" axle, width .810" (20 mm), Ø.410" (10.5 mm) - #MID851
MID AMERICA Carbon fiber rims - #MID851
- For 3/32" axle;
- width .810" (20 mm);
- Dia. .410" (10.5 mm);
-
MID AMERICA Carbon fiber rims for 3/32" axle, width .810" (20 mm), Ø.410" (10.5 mm), 1 cd. (6 pairs) - #MID851
MID AMERICA Carbon fiber rims, 1 cd. (6 pairs) - #MID851
- For 3/32" axle;
- width .810" (20 mm);
- Dia. .410" (10.5 mm);
-
S&K PLASTIC RIMS 3/32" axles, width 20 mm, Ø10.5 mm, (1,7 grammes/ pair) - #SK10520
S&K PLASTIC RIMS - #SK10520
PARAMETERS
- axle, mm.: 2,36
- width, mm: 20
- dia.,mm: 10.5
- weight per pair, gr/pair: 1,7
-
S&K PLASTIC RIMS FOR 2 mm axle, width 16 mm, Ø10.5 mm, ultra light (1,62 gr/pair)
PARAMETERS
- axle, mm: 2
- width, mm: 16
- dia.,mm: 10,5
- weight per pair, gr/pair: 1,62
-
JK Plastic rims for 3/32" axle, width 20 mm, Ø.433" (11 mm) - #R3I
JK Plastic rims - #R3I
- For 3/32" axle;
- Width 20 mm;
- Dia. .433" (11 mm).
-
S&K FRONT WHEELS FOR F 1/32, Ø14,5 mm, pair
FRONT WHEELS FOR F 1/32, Ø14,5 mm, pair
Replacement pair of front wheels for formula 1/32 chassis
-
JK Front wheels for F1/32, 0.750"D 0.530"H 0.225"W 3/32"Axle (Ø18,8 mm, rimSz 13,46 mm, width 5,7 mm, axle 2,36 mm), pair - #T110F
JK Front wheels for F1/32, pair - #T110F
PARAMETERS
- Axle: 3/32" (2,36 mm)
- Width: 0.225" (5,7 mm)
- Dia.: 0.750" (18,8 mm)
- Rims material: plastic
- For classes: F1/32 (JKP F 1/32 "CHEETAH 11 CHASSIS KIT" or "B.S.V KIT for assembly F1/32) & for FORMULA 1/24 classes, and for other model classes, such as "TEAPOT" or GM
Old catalog #JK8746PF
-
BSV Plastic rims for 3/32" axle, width 20 mm, Ø11 mm - #BSV2011
BSV Plastic rims
- For 3/32" axle;
- Width 20 mm;
- Dia. 11 mm.
-
S&K PLASTIC RIMS FOR 2 mm axle, width 16 mm, Ø10.5 mm,w/offset of the hub for ES 1/32 & Production 1/32, ultra light(1,64 gr/pair)
PARAMETERS
- axle, mm: 2
- width, mm: 16
- dia.,mm: 10,5
- weight per pair, gr/pair: 1,64
- with offset of hub for ES 1/32 & Production 1/32
-
S&K PLASTIC RIMS FOR 3/32" axle, width 20 mm, Ø11 mm, ultra light (1,82 gr/pair) - #SK1120
S&K PLASTIC RIMS, ultra light (1,82 gr/pair) - #SK1120
PARAMETERS
- axle, mm.: 2,36
- width, mm: 20
- dia.,mm: 11
- weight per pair, gr/pair: 1,82
-
BSV Plastic rims for 3/32" axle, width 16 mm, Ø11 mm - #BSV1611
BSV Plastic rims
- For 3/32" axle;
- Width 16 mm;
- Dia. 11 mm.
-
BSV Plastic rims for 3/32" axle, width 16 mm, Ø11 mm, w/offset of the hub - #BSV1611of
BSV Plastic rims
- For 3/32" axle;
- Width 16 mm;
- Dia. 11 mm;
- W/offset of the hub for ES 1/32 & Production 1/32.
-
S&K PLASTIC RIMS FOR 2 mm axle, width 20,2 mm, Ø10.5 mm, ultra light (1,72 gr/pair)
PARAMETERS
- axle, mm: 2
- width, mm: 20,2
- dia.,mm: 10,5
- weight per pair, gr/pair: 1,72
-
BSV Duraluminium rims for 3/32" axle, width 16 mm, Ø11 mm, w/offset of the hub - #BSVd1611of
BSV Duraluminium rims
- For 3/32" axle;
- Width 16 mm;
- Dia. 11 mm;
- W/offset of the hub for ES 1/32 & Production 1/32.
-
BSV Plastic rims for 2 mm axle, width 16 mm, Ø11 mm - #BSV16112
BSV Plastic rims
- For 2 mm axle;
- Width 16 mm;
- Dia. 11 mm.
-
JK Front wheels for F1/32, 0.680"D 0.530"H 0.250"W 3/32"Axle (Ø17,27 mm, rimSz 13,46 mm, width 6,35 mm, axle 2,36 mm), pair - #T109F
JK Front wheels for F1/32, pair - #T109F
PARAMETERS
- Axle: 3/32" (2,36 mm)
- Width: 0.250" (6,35 mm)
- Dia.: 0.680" (17,27 mm)
- Rims material: plastic
- For classes: F1/32 (JKP F 1/32 "CHEETAH 11 CHASSIS KIT" or "B.S.V KIT for assembly F1/32) & for FORMULA 1/24 classes, and for other model classes, such as "TEAPOT" or GM
Old catalog #JK87461PF
-
MID AMERICA Model wheels 3/32" axle, .720" (18.3 mm) dia., on jumbo carbon rims, big full hub, natural tires, pair - #MID60F
MID AMERICA Model wheels, pair - #MID60F
PARAMETERS
- Axle: 3/32" (2,36 mm)
- Dia.: .720" (18.3 mm)
- Rims material: jumbo carbon
- Tire: natural
- For classes scale: 1/32
-
PRO-TRACK Model wheels NATURAL EUROPEAN RUBBER 3/32" axle, .725" (18.4 mm) dia., .800" (20.32 mm) width, small hub, magnesium rims - #PTM286
PRO-TRACK Model wheels NATURAL EUROPEAN RUBBER 3/32" axle, .725" (18.4 mm) dia., .800" (20.32 mm) width, small hub, magnesium rims - #PTM286
PARAMETERS
- Axle: 3/32" (2,36 mm)
- Dia.: .725" (18.4 mm)
- Width: 800" (20.32 mm)
- Rims material: magnesium
- Tire: NATURAL EUROPEAN RUBBER
- For classes scale: 1/24
-
JK MODEL WHEELS 3/32" AXLE, 15.3MM WIDTH, ON PLASTIC RIMS, for F1/32, pair - #T201N
JK MODEL WHEELS 3/32" AXLE, 15.3MM WIDTH, ON PLASTIC RIMS, for F1/32, pair - #T201N
0.720"D 0.400"H 0.600"W 3/32"A Natural 1/32
PARAMETERS
- Axle, mm: 2,36
- Width, mm: 15,3
- Rims material: plastic
- For classes: F1/32
Old catalog #JK8721SP
-
JK Model wheels 3/32" axle, 15.3 mm width, on plastic rims Ø10.5 mm, with offset hub for ES32, pair - #T205N
JK Model wheels 3/32" axle, 15.3 mm width, on plastic rims Ø10.5 mm, with offset hub for ES32, pair - #T205N
1/32 Scale Reverse Hub Small Rim Tires on Plastic Hub.
PARAMETERS
- Axle, mm: 2,36
- Width, mm: 15,3
- Rims material: plastic
- Rims dia., mm: 10,5
- For classes: ES32
- *with offset hub
Old catalog #JK8733SP
-
JK Model wheels 3/32" axle, 15.3 mm width, on plastic rims Ø12 mm, with offset hub for ES32, pair - #T203N
JK Model wheels 3/32" axle, 15.3 mm width, on plastic rims Ø12 mm, with offset hub for ES32, pair - #T203N
1/32 Scale Reverse Hub Small Rim Tires on Plastic Hub.
PARAMETERS
- Axle, mm: 2,36
- Width, mm: 15,3
- Rims material: plastic
- Rims dia., mm: 12
- For classes: ES32
- *with offset hub
Old catalog #JK8733P
-
JK Model wheels 3/32" axle, 20 mm width, on plastic rims, pair - #T3S3N
JK Model wheels 3/32" axle, 20 mm width, on plastic rims, pair - #T3S3N
PARAMETERS
- Axle, mm: 2,36
- Width, mm: 20
- Rims material: plastic
- For classes scale: 1/24
Old catalog #JK8700PP
-
JK Rear wheel tires D4 0.375"ID x 0.850"OD Natural Donut, pair - #DS/L
JK Rear wheel tires D4 "natural donut", pair - #DS/L
PARAMETERS
- Inside dia., mm: 9,5
- Outside dia., mm: 21,5
- Made for rims, dia., mm: 10
These tires can use in all classes
Old catalog #JKP-D4
-
JK Natural rubber donuts (JKP-D5) inside Ø10,8 mm (.425"), outside Ø24,76 mm (.975"), pair - #DML/LB
JK Natural rubber donuts (JKP-D5)
PARAMETERS
- Inside dia.: 10,8 mm (.425")
- Outside dia.: 24,76 mm (.975").
Old catalog #JKP-D5
-
SLOT FOX Drag racing donuts, inside Ø 15,24 mm (.600"), outside Ø 34,34 mm (1.352"), about 17,78 mm (.700") width, pair - #SF70100
SLOT FOX Drag racing donuts, inside Ø 15,24 mm (.600"), outside Ø 34,34 mm (1.352"), about 17,78 mm (.700") width, pair
1 Pair Slot Fox Natural Rubber Donuts for Drag Racing, Replace worn out drag tires and keep your expensive hubs without replacement cost.
-
B52 PINK PRIMO donuts. inside Ø 9 mm, outside Ø21 mm, about 25,5 mm width, pair
B52 PINK PRIMO donuts. inside Ø 9 mm, outside Ø21 mm, about 25,5 mm width, pair
Premium quality donuts
-
S&K GEAR 48 PITCH, 40T, w/out hub for press-on 3/32" axle, (Ø21 mm)
S&K GEAR 48 PITCH, 40T, w/out hub for press-on 3/32" axle, (Ø21 mm)
This gear is made for pressing on the axle!
You can pressed-on more thick axle, if you deploy the fitment hole
-
BSV Plastic rims for 2 mm axle, width 16 mm, Ø11 mm, w/offset of the hub - #BSV16112of
BSV Plastic rims
- For 2 mm axle;
- Width 16 mm;
- Dia. 11 mm;
- W/offset of the hub for ES 1/32 & Production 1/32.
-
BSV Plastic rims for 2 mm axle, width 20 mm, Ø11 mm - #BSV20112
BSV Plastic rims
- For 2 mm axle;
- Width 20 mm;
- Dia. 11 mm.
-
YRE Aluminium D16T rims for 3/32" axle, width 16 mm, Ø12 mm
YRE Aluminium D16T alloy rims
- For 3/32" axle;
- Width 16 mm;
- Dia. 12 mm;
- Weight pair 1.9 g;
- Aluminium D16T alloy. Manufactured on the precision lathe. Holes milled up to 3/32". With offset of the hub, lightweight. Stiffener on the outer end.
-
JK Plastic rims for 3/32" axle, width 20 mm, Ø.510" (12.95 mm) - #R3L
JK Plastic rims - #R3L
- 3/32" axle,
- width 20 mm,
- Ø.510" (12.95 mm).
-
ZHB Custom made wheels, regular donuts, any rims, handmade, super quality, 3M tire glue, screw w/hollow
ZHB Custom made wheels, regular donuts, any rims, handmade, super quality, 3M tire glue, screw w/hollow
-
ZHB Custom made wheels, primo donuts, any rims, handmade, super quality, 3M tire glue, screw w/hollow
ZHB Custom made wheels, primo donuts, any rims, handmade, super quality, 3M tire glue, screw w/hollow
-
S&K PLASTIC RIMS FOR 2 mm axle, width 20 mm, Ø11 mm, ultra light (1,87 gr/pair) - #SK11202
S&K PLASTIC RIMS, ultra light (1,87 gr/pair) - #SK11202
PARAMETERS
- axle, mm: 2
- width, mm: 20
- dia.,mm: 11
- weight per pair, gr/pair: 1,87
-
MID AMERICA Carbon fiber rims for 3/32" axle, width .810" (20 mm), Ø.550" (14 mm) - #MID856
MID AMERICA Carbon fiber rims - #MID851
- For 3/32" axle;
- width .810" (20 mm);
- Dia. .550" (14 mm);
-
MID AMERICA Carbon fiber rims for 3/32" axle, width .810" (20 mm), Ø.550" (14 mm), 1 cd. (6 pairs) - #MID856
MID AMERICA Carbon fiber rims, 1 cd. (6 pairs) - #MID851
- For 3/32" axle;
- width .810" (20 mm);
- Dia. .550" (14 mm);
-
BSV Plastic rims for 2 mm axle, width 16 mm, Ø15 mm - #BSV16152
BSV Plastic rims
- For 2 mm axle;
- Width 16 mm;
- Dia. 15 mm.
-
BSV Plastic rims for 3/32" axle, width 16 mm, Ø15 mm - #BSV1615
BSV Plastic rims
- For 3/32" axle;
- Width 16 mm;
- Dia. 15 mm.
-
JK Front wheels for 1/24, 0.750"D 0.530"H 0.375"W 3/32"Axle (Ø19,05 mm, rimSz 13,46 mm, width 9,525 mm, axle 2,36 mm), pair - #T113F
JK Front wheels for 1/24, pair - #T113F
PARAMETERS
- Axle: 3/32" (2,36 mm)
- Width: 0.375" (9,525 mm)
- Dia.: 0.750" (19,05 mm)
- Rims material: plastic
- For classes: FORMULA 1/24 classes, and for other model classes, such as "TEAPOT" or GM
Old catalog #JK8747PF
-
S&K GEAR 48 PITCH, 40T, 3/32" axle, (Ø21 mm)
S&K GEAR 48 PITCH, 40T, 3/32" axle, (Ø21 mm)
-
PLASTIC REAR RIMS FOR 1/24 MODELS (TEAPOT CUP, F1/24, GM), 1 PAIR
PLASTIC REAR RIMS FOR 1/24 MODELS (TEAPOT CUP, F1/24, GM), 1 PAIR - #543
PARAMETERS
- axle, mm: 2,36
- dia., mm: 14
- width, mm: 16,5
-
S&K GEAR 64 PITCH, 49T, 0° angle, 3/32" axle, Ø20.4 mm - #G64349
The long-awaited anologue of 45 teeth gear from Horky. Maximal quantity of teeth for TEAPOT models in St.Petersburg, in which definite the min. diameter of rear wheels (22 mm) and height of rear axle - 11.5 mm.
Also, this gear perfect to GM-class.
-
KOFORD BRASS RETAINERS FOR .063 TUBING 1 pc. - #M536
Machined brass retainers (eyelets) for .063 tubing
Perfect fit for attaching the front wheels to the formula 1/32! (inner dia. 1.6 mm)