Setups For Eurosport Motors CAHOZA

• 

  CAHOZA 12 magnets FORMEL 32 SET UP .376T x .256L - can ID .570 - #100

  PARAMETERS

  • Magnets quantity: 12
  • Outside dia.: .580" (14,75 mm)
  • Magnets height: .376" (9,6 mm)
  • Magnets length: .255" (6,5 mm)
  • Endbells dia.: .570" (14,5 mm)
  • Total length (including endbells, without post for ball bearing): .567" (14.4 mm)
  • For armatures dia.: .472" armatures, especially altered horizontal hardware, 3 coil anodised spring posts, endbell is milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis

  194.74 $

• 

  CAHOZA 16 magnets FORMEL 32 SET UP .376T x .256L - can ID .570 - #100-A

  PARAMETERS

  • Magnets quantity: 16
  • Outside dia.: .580" (14,75 mm)
  • Magnets height: .376" (9,6 mm)
  • Magnets length: .255" (6,5 mm)
  • Endbells dia.: .570" (14,5 mm)
  • Total length (including endbells, without post for ball bearing): .567" (14.4 mm)
  • For armatures dia.: .472" armatures, especially altered horizontal hardware, 3 coil anodised spring posts, endbell is milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis

  205.26 $

• 

  CAHOZA SPORT 32 SETUP V 16 SEGMENT, 450T x .300L - can ID .577 - #101

  PARAMETERS

  • 16 segment magnets – bevelled 15°
  • Outside dia.: .577" (14,60 mm)
  • Magnets height: .448" (11,4 mm)
  • Magnets length: .315" (8 mm)
  • Endbells dia.: .570" (14,5 mm)
  • Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
  • Setup designed for .485" armatures, especially altered vertical hardware, 5 coil anodised spring posts, long tower for PK arms (with commudator cap), endbell is partially milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis

  205.26 $

• 

  CAHOZA SPORT 32 SETUP V 16 SEGMENT, 450T x .300L - can ID .577 - #101-A

  PARAMETERS

  • 16 segment magnets – bevelled 7°
  • Outside dia.: .577" (14,60 mm)
  • Magnets height: .448" (11,4 mm)
  • Magnets length: .315" (8 mm)
  • Endbells dia.: .570" (14,5 mm)
  • Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
  • Setup designed for .485" armatures, especially altered vertical hardware, 5 coil anodised spring posts, long tower for PK arms (with commudator cap), endbell is partially milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis

  195.00 $

• 

  CAHOZA SPORT 32 SETUP V 24 SEGMENT, 450T x .300L - can ID .577 - #101-B

  PARAMETERS

  • 16 segment magnets – bevelled 15°
  • Outside dia.: .577" (14,60 mm)
  • Magnets height: .448" (11,4 mm)
  • Magnets length: .315" (8 mm)
  • Endbells dia.: .570" (14,5 mm)
  • Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
  • Setup designed for .485" armatures, especially altered vertical hardware, 5 coil anodised spring posts, long tower for PK arms (with commudator cap), endbell is partially milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis

  221.05 $

• 

  CAHOZA EUROSPORT 24 SETUP 20 SEGMENT FLAT, .450T x .300L - can ID .590 - #102-A

  PARAMETERS

  • Magnets quantity: 20 flat
  • Outside dia.: .590" (15,00 mm)
  • Magnets height: .448" (11,4 mm)
  • Magnets length: .315" (8 mm)
  • Endbells dia.: .570" (14,5 mm)
  • Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
  • Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)

  210.53 $

• 

  CAHOZA EUROSPORT 24 SETUP 24 SEGMENT FLAT, .450T x .300L - can ID .590 - #103

  PARAMETERS

  • Magnets quantity: 24 flat
  • Outside dia.: .590" (15,00 mm)
  • Magnets height: .448" (11,4 mm)
  • Magnets length: .315" (8 mm)
  • Endbells dia.: .570" (14,5 mm)
  • Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
  • Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)

  221.05 $

• 

  CAHOZA EUROSPORT 24 SETUP V 24 SEGMENT, .450T x .300L - can ID .590 - #103-A

  PARAMETERS

  • 24 segmented magnets – bevelled 15°
  • Outside dia.: .590" (15,00 mm)
  • Magnets height: .448" (11,4 mm)
  • Magnets length: .315" (8 mm)
  • Endbells dia.: .570" (14,5 mm)
  • Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
  • Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)

  231.58 $

• 

  CAHOZA EUROSPORT 24 SETUP V 28 SEGMENT, .450T x .300L - can ID .590 - #103-B

  PARAMETERS

  • 28 segmented magnets – bevelled 7°
  • Outside dia.: .590" (15,00 mm)
  • Magnets height: .448" (11,4 mm)
  • Magnets length: .315" (8 mm)
  • Endbells dia.: .570" (14,5 mm)
  • Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
  • Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)

  242.11 $