Fluids
-
LUCKY BOB Arm dye - blue - #1073B
LUCKY BOB Arm dye - blue - #1073B
-
LUCKY BOB ARM DYE-BLACK - #10746BK
ARM DYE-BLACK
-
LUCKY BOB ARM DYE-GREEN - #1072G
ARM DYE GREEN
-
LUCKY BOB ARM DYE-PURPLE - #1073P
ARM DYE PURPLE
-
LUCKY BOB ARM DYE-RED - #1074R
ARM DYE-RED
-
LUCKY BOB ARM DYE-YELLOW - #1075Y
ARM DYE-YELLOW
-
LUCKY BOB BRAID JUICE, 1 bottle (60 ml) - #1400
BRAID JUICE
-
PARMA HOME SET LUBE-USE ON PLASTIC - #700
Convenient 2 oz. syringe style applicator is a "must have" item for every tool box. White, zero friction lube is great for plastic gears, bushings and much more. Designed for plastic homeset cars, but can be used on any slot car with great results.
-
PJ RACEWAY BIG RED Tire Cleaner & Conditioner, 1 OZ - #PJ-4002
PJ RACEWAY BIG RED Tire Cleaner & Conditioner, 1 OZ - #PJ-4002
-
PROSLOT Agent 86 Bushing Oil - #PS601
Bushing Oil (Fluorescent Pink)
-
PROSLOT Agent 99 Bearing Oil - #PS602
Ball Bearing Oil (Hulk Green)
-
SKINNER EPOXY HIGH-TEMPERATURE RESIN, one-component - SKEPOXY
Skinner Epoxy
super strength high temp epoxy
Epoxy Instructions
#1 Clean surfaces to be bonded ( lightly sand back of magnets with 400 paper or wire brush with dremel.) Remove any loose magnet dust with magnet putty then wash off with MEK or Acetone solvent. Clean inside of can then cross hatch with exacto blade and wash with MEK or Acetone.
#2 Apply a thin coating to both the magnets and can surfaces to be bonded. Allow 25 minutes for parts to air dry
#3 Place magnets in can, position with v blocks or a slug then place in pre heated oven @ 180 F for 15 minutes. Remove from oven then let cool. Make final magnet adjustments if necessary.
#4 Pre-heat oven to 350 f place setup in oven for 25 minutes
remove, cool and hone to desired gap. -
SLICK7 CLEANER-CONDITIONER FOR COMMUTATOR VOODO COMM BRAID DROPS - SL404
VOODOO COMM DROPS AND BRAID ANTI-BURN TREATMENT
-
SLICK7 Glidex synth lubricant - #SL7405
SL7405 - GLIDEX SYNTHETIC AEROSPACE LUBRICANT (MIL-SPEC). Ultra -HighFilmstrength , Bonding, low viscosity oil for ball bearing.
-
SLICK7 OILER BOTTLER CAP - #SL7531
oiler replacement caps - now you can safely lose this cap from the oil bottle!!!:)))))
-
TayloRacing MAGNET CLEANER
Sticky cleaner for removing chips from magnets. May be kneaded & reused many times.
-
UHU PLUS 300 EPOXY RESIN ADHESIVE, Tube Binder, Tube Hardener
Quick Overview
- solvent free two-part epoxy resin adhesive for heavy-duty requirements (300kg/cm2)
- mix proportion: 1 part binder to 1 part hardener (by volume).
- working time (open time) approx. 90 minutes
- setting time and final strength depend on temperature.
- final strength up to 30N/mm2
- time resistant, impact resistant and water resistant
Excellent epoxy for fixing magnets! -
VOKI Armature paint + refil (2 + 5ml) - #045P+R
VOKI Armature paint + refil (2 + 5ml) - #045P+R
-
VOKI Armature paint refil – 5ml - #046R
VOKI Armature paint refil – 5ml - #046R
-
VOKI Armature paint – 2ml - #045P
VOKI Armature paint – 2ml - #045P
-
ZHB Spray unit per bottle for the tire traction
Spray unit per bottle for the tire traction
-
ZHB SUPER GLUE "MONOLIT"
Good super glue with a dispenser. Suitable for gluing magnets and other works.