Parts & Details for Build "TEAPOT" Models
-
ASSOCIATED STEEL NUT M2, 1 pc. - #25214
STEEL NUT M2, 1 pc.
Steel nut for fixing guides
-
ASSOCIATED STEEL SCREW M2 X 8 MM W/COUNTERSUNK, for Phillips-head screwdriver, 1 pc. - #25196
ASSOCIATED STEEL SCREW M2 X 8 MM W/COUNTERSUNK HEAD, for Phillips-head screwdriver, 1 pc. - #25196
-
DUBICK Rear bridge for the chassis "SUPER-TEAPOT" 1/24 (w/hole to the motor)
DUBICK Rear bridge for the chassis "SUPER-TEAPOT" 1/24 (w/hole to the motor)
-
DUBICK Rear bridge for the chassis "TEAPOT" 1/24 (model width 83 mm, rims width 18 mm, brigde width 43.5 mm)
DUBICK Rear bridge for the chassis "TEAPOT" 1/24 (model width 83 mm, rims width 18 mm, brigde width 43.5 mm)
Suitable for 16 mm gears.
-
DUBICK Universal kit for assembling body mounting unit of the "Teapot 1/32" & "Teapot 1/24" models. Includes 4 pre-cut tubes. Suitable for JK clips #9008 or #9010
DUBICK Universal kit for assembling body mounting unit of the "Teapot 1/32" & "Teapot 1/24" models. Includes 4 pre-cut tubes. Suitable for JK clips #9008 or #9010
-
INTECHNO KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24. Full cut details kit, ready for build by rivets - #IR10
KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24
Parameters:
- Kit for buid chassis: "SUPER-TEAPOT" 1/24
- Scale: 1:24
- Full cut details kit, ready for build by rivets
-
INTECHNO KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24. SHEET 100 x 200 mm, thick. 1,5 mm, w/cut on half depth of chassis details - #IR09
KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24
Parameters:
- Kit for buid chassis: "SUPER-TEAPOT" 1/24
- Scale: 1:24
- Sheet: 100 x 200 mm
- Thick.: 1,5
- w/cut on half depth of chassis details
-
INTECHNO KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24. SHEET 100 x 200 mm, thick. 1,5 mm, w/drawing of chassis parts - #IR08
KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24
Parameters:
- Kit for buid chassis: "SUPER-TEAPOT" 1/24
- Scale: 1/32
- Sheet: 100 x 200 mm
- Thick.: 1,5
- w/drawing of chassis parts
-
INTECHNO KIT FOR BUILD CHASSIS "TEAPOT" 1/24 "STANDART" CLASSIC TYPE. Full cut details kit, ready for build by rivets - #IR13
KIT FOR BUILD CHASSIS "TEAPOT" 1/24 "Standart", Classic type
Parameters:
- Kit for buid chassis: "TEAPOT" 1/24 "Standart", Classic type
- Scale: 1:24
- Full cut details kit, ready for build by rivets
-
INTECHNO KIT FOR BUILD CHASSIS "TEAPOT" 1/24 "STANDART" CLASSIC TYPE. SHEET 100 x 200 mm, thick. 1,5 mm, w/cut on half depth of chassis details - #IR12
KIT FOR BUILD CHASSIS "TEAPOT" 1/24
Parameters:
- Kit for buid chassis: "TEAPOT" 1/24
- Scale: 1:24
- Sheet: 100 x 200 mm
- Thick.: 1,5
- w/cut on half depth of chassis details
-
INTECHNO KIT FOR BUILD CHASSIS "TEAPOT" 1/24 "STANDART". SHEET 100 x 200 mm, thick. 1,5 mm, w/drawing of chassis details - #IR11
KIT FOR BUILD CHASSIS "TEAPOT" 1/24 "Standart"
Parameters:
- Kit for buid chassis: "TEAPOT" 1/24 "Standart"
- Scale: 1/24
- Sheet: 100 x 200 mm
- Thick.: 1,5
- w/drawing of chassis details
-
INTECHNO KIT FOR BUILD CHASSIS "TEAPOT" 1/24. Full cut details kit, ready for build by rivets - #IR07
KIT FOR BUILD CHASSIS "TEAPOT" 1/24
Parameters:
- Kit for buid chassis: "TEAPOT" 1/24
- Scale: 1:24
- Full cut details kit, ready for build by rivets
-
INTECHNO KIT FOR BUILD CHASSIS "TEAPOT" 1/24. SHEET 100 x 200 mm, thick. 1,5 mm, w/cut on half depth of chassis details - #IR06
KIT FOR BUILD CHASSIS "TEAPOT" 1/24
Parameters:
- Kit for buid chassis: "TEAPOT" 1/24
- Scale: 1:24
- Sheet: 100 x 200 mm
- Thick.: 1,5
- w/cut on half depth of chassis details
-
INTECHNO KIT FOR BUILD CHASSIS "TEAPOT" 1/32. Full cut details kit, ready for build by rivets - #IR04
KIT FOR BUILD CHASSIS "TEAPOT" 1/32
Parameters:
- Kit for buid chassis: "TEAPOT" 1/32
- Scale: 1:32
- Full cut details kit, ready for build by rivets
-
INTECHNO KIT FOR BUILD CHASSIS "TEAPOT" 1/32. SHEET 100 x 200 mm, thick. 1,5 mm, w/cut on half depth of chassis details - #IR03
KIT FOR BUILD CHASSIS "TEAPOT" 1/32
Parameters:
- Kit for buid chassis: "TEAPOT" 1/32
- Scale: 1:32
- Sheet: 100 x 200 mm
- Thick.: 1,5
- w/cut on half depth of chassis details
-
INTECHNO KIT FOR BUILD CHASSIS "TEAPOT" 1/32. SHEET 100 x 200 mm, thick. 1,5 mm, w/drawing of chassis details - #IR02
KIT FOR BUILD CHASSIS "TEAPOT" 1/32
Parameters:
- Kit for buid chassis: "TEAPOT" 1/32
- Scale: 1:32
- Sheet: 100 x 200 mm
- Thick.: 1,5
- w/drawing of chassis details
-
S&K FRONT RIMS FOR F1/24 MODELS , 1 PAIR - #541
FRONT RIMS FOR F1/24 MODELS , 1 PAIR - #541
This rims is made for pressing on the axle!
PARAMETERS
- dia.,mm: 14
- width for gluing tires, mm: 13
- total width, mm: 17,9
- dia. of holes for set on axle Ø3/32" (2.36 mm), mm : 2,2
-
S&K FRONT RIMS FOR TEAPOT MODELS (TA 1/24), 1 PAIR - #540
FRONT RIMS FOR TEAPOR MODELS (TA 1/24), 1 PAIR - #540
This rims is made for pressing on the axle!
PARAMETERS
- dia., mm: 14
- width for gluing tires, mm: 5,5
- total width, mm: 12
- dia. of holes for set on axle Ø2 mm., mm : 1,8
-
TAYLORACING FRONT WHEEL STICKERS, set for 20 bodies, cut out along the counter - #006
FRONT WHEEL STICKERS, set for 20 bodies, cut out along the counter - #006
Very convenient stickers for preparing your bodies for the passage of a technical commission
-
ZHB ALUMINUM RIVETS Ø2 * 4 mm, WITH A CONVEX HEAD FOR ASSEMBLING THE "TEAPOT" CHASSIS, 50 pcs.
ZHB ALUMINUM RIVETS Ø2 * 4 mm, WITH A CONVEX HEAD FOR ASSEMBLING THE "TEAPOT" CHASSIS, 50 pcs.
-
ZHB ALUMINUM RIVETS Ø2 * 8 mm, WITH COUNTERSUNK HEAD FOR ASSEMBLING THE "TEAPOT" CHASSIS, 50 pcs.
ZHB ALUMINUM RIVETS Ø2 * 8 mm, WITH COUNTERSUNK HEAD FOR ASSEMBLING THE "TEAPOT" CHASSIS, 50 pcs.
-
ZHB BRASS RIVETS Ø2 * 7 mm, WITH COUNTERSUNK HEAD FOR ASSEMBLING THE "TEAPOT" CHASSIS, 50 pcs.
ZHB BRASS RIVETS Ø2 * 7 mm, WITH COUNTERSUNK HEAD FOR ASSEMBLING THE "TEAPOT" CHASSIS, 50 pcs.
-
ZHB Brass rivets Ø2 *4.1 mm, with countersunk head for assembling the "TEAPOT" chassis, 50 pcs.
ZHB Brass rivets Ø2 *4.1 mm, with countersunk head for assembling the "TEAPOT" chassis, 50 pcs.
-
ZHB Duralumin rivets Ø2 * 8 mm, with countersunk head for assembling the "TEAPOT" chassis, 50 pcs.
ZHB Duralumin rivets Ø2 * 8 mm, with countersunk head for assembling the "TEAPOT" chassis, 50 pcs.