Motors, Setups & Motor Parts PROSLOT

• 

  PROSLOT X-7 B PRO motor brushes, 50 prs. - #PS-X7B

  PROSLOT X-7 B PRO motor brushes, 1 pr. - #PS-X7B

  1 pair of X7 motor brushes. These new motor brushes have been thoroughly tested, race proven, and showing terrific results. This motor brush has the same performance as their PS-G7, but with longer wearing characteristics.

  195.00 $

• 

  PROSLOT Endbell with oilite bushing for PROSLOT C-CANS, (w/out brush hoods & cans) - #PS711

  PROSLOT Endbell with oilite bushing for PROSLOT C-CANS, (w/out brush hoods & cans)

  7.50 $

• 

  PROSLOT SpeedFX S16D BALANCED MOTOR - #PS-2001

  PROSLOT SpeedFX S16D BALANCED MOTOR - #PS-2001

  Universal motor with a wide range of uses and wide possibilities of upgrades.

  It is used, as in the simplest models of "Teapot", and in models of trucks. Depending on the ratio and the installed optional armature, the Production class 1/24 is also suitable.

  23.75 $

• 

  PROSLOT Euro MK1 Motor - 26.000+ rpm - #PS-4000

  PROSLOT Euro MK1 Motor - 26.000+ rpm

  155/gm-cm, 280mA, standard with 45 degree springs. Designed for 1/32 and 1/24 ScaleHome, Club and Commercial Racing. CW or CCW rotation

  20.95 $

• 

  PROSLOT EUROSPORT ARMATURES, PARAMETERS UNDER SPECIAL ORDER

  All PARAMETERS under special order

  (Write to us to choose what you need)

  • Wingings
  • Dia.
  • Stack
  • Long (by ballbearings)
  • Advance angle 
  • Arm.shaft: 1,5mm

  
  

  (you can fill this form for made special order)

  Armatures comes after rebalancing (cost 3$).

  81.79 $

• 

  PROSLOT Euro MK1 Motor - 37.000+ rpm - #PS-4001

  PROSLOT Euro MK1 Motor - 37.000+ rpm

  160/gm-cm, 300mA, standard with 60 degree springs. Designed for 1/32 and 1/24 Scale - Home, Club and Commercial Racing. CW or CCW rotation

  20.95 $

• 

  PROSLOT ENDBELL KIT FOR PROSLOT C-CANS, W/BRUSH HOODS - #PS643

  Complete Endbell Kit - includes endbell, hardware, spring cups, oilite and screws

  17.00 $

• 

  PROSLOT Euro MK1 Motor - 47.000+ rpm - #PS-4002

  PROSLOT Euro MK1 Motor - 47.000+ rpm

  160/gm-cm, 950mA, standard with 90 degree springs. Designed for 1/32 and 1/24 Scale - Home, Club and Commercial Racing

  20.95 $

• 

  PROSLOT Euro MK1 Motor blue printed sealed with american made armature - #PS-4002B

  PROSLOT Euro MK1 motor blue printed sealed

  Euro MK 1 Motor - with American made PD (Puppy Dog) armature as used in retro can am racing

  61.00 $

• 

  PROSLOT Euro MK 1 Motor with American made X12 armature 40* - #PS-4002-12

  Euro MK 1 Motor with American made X12 armature 40* CW Rotation

  61.00 $

• 

  PROSLOT C-Can assembled endbell (w/copper hardware) - #PS-618

  PROSLOT C-Can assembled endbell w/copper hardware aligned and honed - undrilled - #PS-618

  24.95 $

• 

  PROSLOT GOLDUST PRO BRUSHES/VERTICAL, pair- #PS-903

  Goldust Pro Vertical Motor Brushes.

  1 pair prepared for installation in vertical brush hoods brushes.

  4.50 $

• 

  PROSLOT GOLDUST PRO BRUSHES/VERTICAL, 6 pairs- #PS-903

  Goldust Pro Vertical Motor Brushes.

  6 pairs prepared for installation in vertical brush hoods brushes.

  27.00 $

• 

  PROSLOT Purple dot MegaMaster 6-mag magnets - #PS-909S

  PROSLOT Purple dot MegaMaster 6-mag magnets - #PS-909S

  Magnets only!

  39.95 $

• 

  PROSLOT Magnet Clips for C-cans,1 pc. - #PS640

  PROSLOT Magnet Clips for C-cans, 1 pc.

  This is the clips for all 12-group (C-cans) motors.

  0.30 $

• 

  PROSLOT HARDWARE FOR PROSLOT MOTORS X-12 GROUP, W/SPRING CUPS & SCREWS- #PS642

  Hardware set complete -includes hardware, oilite, spring cups and screws

  12.00 $

• 

  PROSLOT BRUSH HOOD/ HEAT SINK SET FOR PROSLOT MOTOR (X-12 GROUP), W/OUT SPRING CUPS & SCREWS- #PS641

  Brush Hood & Heat Sink set

  11.00 $

• 

  PROSLOT Velociraptor VR 12 “NEO” motor - #PS-4019

  PROSLOT Velociraptor VR 12 “NEO” motor

  This motor uses the new PS-4017 “Neo” Euro MK1 setup with a specially made .500 diameter VR12 machine wound armature on our race proven Intruder blank and includes G7 brushes. This motor was built for the new wave of “NEO” F/C racing. Our testing using an 85 gram hardbody test car netted .720 ET’s @ 70+ MPH. Recommended starting gear ratio 14/52.

  70.95 $

• 

  PROSLOT SpeedFX 16D/S16D SETUP - #PS 2004

  FX 16D/S16D Motor Setup

  17.75 $

• 

  PROSLOT 16D/S16D MOTOR CAN - #PS2005

  Proslot can for 16D motors, w/out magnets

  9.00 $

• 

  PROSLOT SPEED FX S16D BLUEPRINT SETUP, W/MATCHED MAGNETS - #PS 2100

  SpeedFX 16D/S16D Blueprinted Setup with Matched Magnets. The setup includes straightened can, soldered oilite, aligned and honed brush hoods and matched magnets.

  24.50 $

• 

  PROSLOT Velociraptor VR eXtreme “NEO motor - #PS-4021

  PROSLOT Velociraptor VR eXtreme “NEO motor

  This motor uses the new PS-4017 “NEO” Euro MK1 setup with a specially made .500 diameter VR eXtreme machine wound armature on our race proven Intruder blank and includes G7 brushes. This motor was built for the “Ultimate” bracket racer and “Outlaw NEO” class racer. Our testing using an 85 gram hardbody test car netted .590 ET’s @ 90+ MPH. This motor has no equal in performance for the money. Recommended starting gear ratio 14/54

  79.95 $

• 

  PROSLOT Velociraptor VR Open “NEO” motor - #PS-4025

  PROSLOT Velociraptor VR Open “NEO” motor

  This motor uses the new PS-4017 “NEO” Euro MK1 setup with a specially made .500 diameter custom hand wound all-out Topgun style armature featuring our EDM commutator, wound on our race proven Intruder blank and our copper hardware on the endbell. Standard wind 18/24.5 and double ball bearings. Also available in 25/25, 15/24, 14/24

  152.95 $

• 

  PROSLOT 16D/S16D REPLACEMENT POLYMER ENDBELL - #PS 2008

  16D/S16D REPLACEMENT POLYMER ENDBELL

  5.75 $