Controllers & Controller Parts
-
KOFORD Controller wiper button, 1 pc. - #M738
Controller wiper button, 1 pc.
Wiper button for all Koford controllers
-
PARMA CONTROLLER WIPER ARM - #402
Replacement brass wiper arm for all Economy/Sebring/Turbo Controllers
-
JK Wiper arm with wiper button - #N4
JK Wiper arm with wiper button
Old catalog #JK80814
-
PARMA 1/8" х 1/4" (3.15 х 6.15 MM) FLANGED OILITES, pair - #623S
Replacement pair of Bushing Oilites for Turbo Controller Trigger (Requires one pair). Also for adding 1/8" diameter axle to slot car chassis with 1/4" hole.
-
DIFALCO HD30 1/24 UPGRADE KIT - #DIF261
HD30 Upgrade PCB: Convert your 10 or 15 band Pro Plus or Fanatic controller to our new 30 band high definition design. You get the HD30 circuit board with a standard 148 ohm network board installed. Simply unsolder a few wires and remove the old PCB. Transfer the original brake and sensitivity rheostats over to the new HD30 board. Now bolt the PCB to the frame and solder a few wires to their correct positions. Simple instructions included.
-
DIFALCO TURBO BLAST BASIC. KIT - #DIF704
40 amp (70 amp surge) high power relay installs easily on main wires. Includes instructions for all controllers as well as special parts and instructions for Difalco Design "E"Motion electronic controllers and modules. Text plus drawings make our kit easier to install than other brands!
-
ZHB Brake rheostat 4.7 Ohms
ZHB Brake rheostat 4.7 Ohms
Wound with flat nichrome wire. Primarily used in controllers manufactured by Nesterenko A.I., but is suitable for any electronic controller.
-
DIFALCO Brake rheostat for 1/32 - #DD336
DIFALCO Brake rheostat for 1/32 - #DD336
Replacement 25 ohm brake rheostat used on all 1/32 controllers.
-
DIFALCO ADJUSTABLE BRAKE RHEOSTAT W/KNOB - #DIF806
Brake Rheostat, pro, with knob, variable with off position, reducing washers.
-
DIFALCO PRO RHEOSTAT W/OFF POSITION - #DIF807
Same as the 806 but with no knob
-
DIFALCO POWER TRANSISTOR - #DIF830
Power Transistor, large silver transistor used on all "E"Motion electronic controllers and modules
-
DIFALCO SENSITIVITY RHEOSTAT FOR 1/24 - #DIF840
Sensitivity rheostat replacement for all Difalco controllers
-
DIFALCO Sensitivity/Traction rheostat 1/8 shaft 50ohm - #DD843
DIFALCO Sensitivity/Traction rheostat 1/8 shaft 50ohm - #DD843
-
ZHB "Banana" connector for controller, 1 pc.
"Banana" connector for controller, 1 pc.
-
KOFORD Alligator clips, 1 set - #M176
KOFORD Alligator clips, 1 set - #M176
Solid copper alligator clips
-
KOFORD Controller boots, 1 set - #M748
KOFORD Controller boots, 1 set - #M748
Red, White and Black allligator boots
-
PARMA Turbo Controller - 4 OHM - #264
PARMA Turbo Controller - 4 OHM - #264
PARMA Controllers have been the standard in performance since 1968. Their simplicity and durability means many years of dependable service. Resistors can be swapped easily to tailor your handling for different tracks and cars. Use for all 16D, Group 7, Group 12, Group 27 class racing. Turbo - Our most popular performance controller. Features an anodized Turbo Frame, double barrel resistor and 2 additional contact pads to ensure full brake and full power. Features clear handle, nylon trigger with oilites and 14 gauge wire, includes boots/clips.
-
PARMA Turbo controller - 4 Ohm - ball bearings & carbon fiber handle - #264WCF
PARMA Turbo controller - 4 Ohm - ball bearings & carbon fiber handle - #264WCF
PARMA Controllers have been the standard in performance since 1968. Their simplicity and durability means many years of dependable service. Resistors can be swapped easily to tailor your handling for different tracks and cars.
Use for all 16D, Group 7, Group 12, Group 27 class racing.
Turbo - Our most popular performance controller. Features an anodized Turbo Frame, double barrel resistor and 2 additional contact pads to ensure full brake and full power.
Features carbon fiber handle, nylon trigger with ball bearings and 14 gauge wire, includes boots/clips.
-
DIFALCO Genesis 2 HD30 controller w/ economy brake & traction control - #DD280
DIFALCO Genesis 2 HD30 controller w/ economy brake & traction control - #DD280
All the features of the DD270 with our traction control rheostat added. The traction rheostat reduces the amount of power available on the upper wiper bands to reduce sliding out and deslotting on the exit of turns. Extremely useful for scale cars as well as NASCAR type racing.
-
S&K Adjustable Controller Chip (for S&K ELECTRONIC CONTROLLER #SK0101) 0-160 Ohm - #SK0107
S&K Adjustable Controller Chip (for S&K ELECTRONIC CONTROLLER #SK0101) 0-160 Ohm
-
S&K CONTROLLER CHIP (RESISTANCE UNDER THE ORDER)
Controller chip for S&K ELECTRONIC CONTROLLER
Contact us for choose necessary resistance
Available for order (Om):
11; 22; 31; 43; 52; 60; 76; 90; 100; 110; 120; 148; 170
-
S&K Controller chip (for S&K ELECTRONIC CONTROLLER #SK0101) 22 Ohm - #SK0106-22
Also, available for order (Ohm) (contact us for details):
11; 22; 31; 43; 52; 60; 76; 90; 100; 110; 120; 148; 170
-
S&K Controller chip (for S&K ELECTRONIC CONTROLLER #SK0101) 31 Ohm - #SK0106-31
Also, available for order (Ohm) (contact us for details):
11; 22; 31; 43; 52; 60; 76; 90; 100; 110; 120; 148; 170
-
S&K Controller chip (for S&K ELECTRONIC CONTROLLER #SK0101) 43 Ohm - #SK0106-43
Also, available for order (Ohm) (contact us for details):
11; 22; 31; 43; 52; 60; 76; 90; 100; 110; 120; 148; 170