Gears

• 

  DUBICK Pinion 64 pitch, 10T , 0° angle, 2 mm bore, brass (This is press-on style pinion gear) - #DB502-10

  Pinion 64 pitch, 10T , 0° angle,  2 mm bore, brass

  This is press-on style pinion gear!

  1.95 $

• 

  ARP PINION GEAR 64PITCH, 8T , 5° ANGLE, 2 mm bore- #ARP6408A

  The best chooise for Production 1/32!

  64 pitch stainless steel 8 tooth pinion gears with 5 degree angle heat treated to 36-38 hardness

  7.99 $

• 

  S&K Crown gear, hypoid 72 pitch 30 teeth , offset 0.5 mm, 2 mm axle, Ø13.2 mm, green - S&K#Offset 0.5mm - #SK30722

  S&K Crown gear, hypoid 72 pitch 30 teeth , offset 0.5 mm, 2 mm axle,  Ø13.2 mm, green - S&K#Offset 0.5mm - #SK30722R

  This gear used in Formula 1/32.

  But, when you set this gear you need use special tool (tool for set motor on F1 with down offset 0.5 mm)

  4.16 $

• 

  HORKY Crown gear 64-72 pitch 30 teeth, 2 mm axle, Ø13.05 mm, green - HOR#F1-2 mm

  This gear used in Formula 1/32

  Producer declared 64 pitch, but traditionally we use pinions 72 pitch with this gears

  At the same time, how I know, pinions 64 pitch also can work with this gears

  5.26 $

• 

  BSV Plastic Pinion 64 pitch, 10T, 0° ANGLE, 2 mm bore - #BSVP6410

  BSV Plastic Pinion 64 pitch, 10T, 0° ANGLE, 2 mm bore - #BSVP6410

  Made from plastic

  1.80 $

• 

  HORKY PINION 72 PITCH, 6T, EDM, 0° angle, 1.5 mm bore (FOR F1/32)

  HORKY PINION 72 PITCH, 6T, EDM, 0° angle, 1.5 mm bore (FOR F1/32)

  26.32 $

• 

  ARP PINION 72 PITCH, 7T, 0° angle, 1.5 mm bore (FOR F1/32) - #ARP7207-1,5 mm

  Same as 7207 execpt for 1.5mm shaft instead of standard 2mm - 72 pitch stainless steel 7 tooth pinion gears heat treated to 36-38 hardness

  The alternative to the HORKY pinions. One hundred percent ratio of price / quality. Very soft work of reducer.

  7.99 $

• 

  CAHOZA black covered pinion 80 pitch 6 teeth, 0° angle 1.5 mm bore, EDM - #13

  CAHOZA black covered pinion 80 pitch 6 teeth, 0° angle 1.5 mm bore, EDM - #13

  29.00 $

• 

  DUBICK PINION GEAR 48 PITCH, 9T, 2 mm bore, BRASS (This is press-on style pinion gear) - #DB501-9

  DUBICK PINION GEAR 48 PITCH, 9T, 2 mm bore, BRASS

  This is press-on style pinion gear

  1.35 $

• 

  BSV Pinion gear 48 pitch, 9T, 0° angle, 2 mm bore, STEEL - #BSV489

  BSV Pinion gear 48 pitch, 9T, 0° angle, 2 mm bore, STEEL - #BSV489

  3.10 $

• 

  JK PINION GEAR 48 PITCH, 9T , 2 mm bore, STEEL - #P49S

  JK PINION GEAR 48 PITCH, 9T , 2 mm bore, STEEL - #P49S 

  48 pitch 9 tooth solder on pinion

  Old catalog #JK4209

  4.59 $

• 

  BSV CROWN GEAR 72 pitch, 30 teeth, 3/32" axle, black - #BSVF7230

  BSV CROWN GEAR 72 pitch, 30 teeth, 3/32" axle, black - #BSVF7230

  3.70 $

• 

  PROSLOT GEAR 64 PITCH, 38T, 0° angle, 3/32" axle, Ø15.65 mm, w/screw- #680-38

  38t Polymer Gears 64 Pitch - The tooth shape was computer designed for less friction. Will never spin on the hub. 35T - Pink, 36T-yellow, 37T-silver, 38T-blue, 39T-violet, 40T-green

  6.50 $

• 

  S&K 80 PITCH 44T, 0° angle, 2mm axle, Ø14.6 mm glued on 2 mm axle KOFORD - ZHB#204

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• JK 80 PITCH 44T, 0° angle, 2mm axle, Ø14.6 mm glued on 2 mm axle KOFORD - ZHB#205

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  HORKY CROWN GEAR 64-72 pitch, 30 teeth, 3/32" axle, Ø13.05 mm, green - #F1-32

  CROWN GEAR 64-72 pitch, 30 teeth, 3/32" axle, Ø13.05 mm, green - #F1-32

  Manufacturer says, that this is 64 pitch, but we  (traditionally:)) use it with 72 pitch pinions.

  At the same time, how I know, 64 pitch pinions could also work with this gears.

  5.26 $

• 

  HORKY BIG HUB 80 PITCH 44T, 0° angle, 2 mm axle, Ø14.5 mm glued on 2 mm axle KOFORD - ZHB#206

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  PARMA SLOT SPUR GEAR 48 PITCH, 33T, 1/8" axle, (Ø18.73 mm) with hub adaptor 3/32", with screw - #70133

  48 pitch spur for 1/8" axle - Slot Sprocket Spur Gears feature light weight, less friction and great gear mesh. They are precision molded from virgin nylon with an integrated aluminum hub. Each gear has two predrilled and tapped holes - one on each side of the hub and one 4/40 allen head set screw is included

  4.28 $

• 

  KOFORD Pinion 64 pitch, 10T, 0° angle, 2 mm bore, precision & hardened - #M323-10

  KOFORD Pinion 64 pitch, 10T, 0° angle, 2 mm bore, precision & hardened - #M323-10

  Features exceptional concentricity providing smoother, more efficient mesh compared to other pinions. Use against plastic spurs only

  4.00 $

• 

  SONIC PINION 64 PITCH, 10T , 0° ANGLE, 2 mm bore - #30-10

  SONIC PINION 64 PITCH, 10T , 0° ANGLE,  2 mm bore - #30-10

  10 tooth 64 pitch hardened pinion. They cut all their pinions individually on a dedicated gear machine for maximum tooth precision.

  4.85 $

• 

  DUBICK PINION GEAR 48 PITCH, 10T, 2 mm bore, BRASS (This is press-on style pinion gear) - #DB501-10

  DUBICK PINION GEAR 48 PITCH, 10T, 2 mm bore, BRASS

  This is press-on style pinion gear

  1.00 $

• 

  BSV Pinion gear 48 pitch, 10T, 0° angle, 2 mm bore, PLASTIC- #BSVP4810

  BSV Pinion gear 48 pitch, 10T, 0° angle, 2 mm bore, PLASTIC- #BSVP4810

  1.80 $

• 

  BSV Gear 48 pitch, 35T, 0° angle, 3/32" axle, Ø18.4 mm - #BSV4835

  BSV Gear 48 pitch, 35T, 0° angle, 3/32" axle, Ø18.4 mm - #BSV4835

  3.70 $

• 

  BSV Gear 64 pitch, 37T, 16° angle, 3/32" axle, Ø15.49 mm

  BSV Gear 64 pitch, 37T, 16° angle, 3/32" axle, Ø15.49 mm

  3.70 $