Gears

• 

  CAHOZA GEAR CAHOZA 64 PITCH, 36T, 0° angle, 3/32" axle, Ø15.00 mm glued on 3/32" axle CAHOZA - CAH#6-AG

  The hub is not cut width, but machined to a diameter 3 mm.

  This gear for ES32 if you use offset rims in gears side or for ES24.

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  11.19 ₤

• 

  CAHOZA GEAR CAHOZA 64 PITCH, 36T, 0° angle, 3/32" axle, Ø15.00 mm glued on 3/32" axle CAHOZA, hub machined to the dia. 3.7 mm - CAH#6-AG

  CAHOZA GEAR CAHOZA 64 PITCH, 36T, 0° angle, 3/32" axle, Ø15.00 mm glued on 3/32" axle CAHOZA, hub machined to the dia. 3.7 mm

  This gear for ES32 if you use offset rims in gears side or for ES24.

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  11.19 ₤

• 

  BSV Gear 64 pitch, 37T, 0° angle, 3/32" axle, Ø15.52 mm - #BSV6437

  BSV Gear 64 pitch, 37T, 0° angle, 3/32" axle, Ø15.52 mm - #BSV6437

  3.18 ₤

• 

  BSV CROWN GEAR 72 pitch, 30 teeth, 2 mm axle, black - #BSVF72302

  BSV CROWN GEAR 72 pitch, 30 teeth, 2 mm axle, black - #BSVF72302

  3.18 ₤

• 

  BSV Gear 64 pitch, 36T, 16° angle, 3/32" axle, Ø15.04 mm

  BSV Gear 64 pitch, 36T, 16° angle, 3/32" axle, Ø15.04 mm

  3.18 ₤

• 

  CAHOZA Gear 64 pitch, 36T, 15° angle, 3/32" axle, Ø15.00 mm (Ø.590") - #11-S

  CAHOZA Gear 64 pitch, 36T, 15° angle, 3/32" axle, Ø15.00 mm (Ø.590") - #11-S

  Polymer gears 64 pitch, for 3/32" axle, angled 15°, selected ones, high quality and accuracy, for demanding racers, tested on our roll tester

  4.00 ₤

• 

  S&K GEAR 64 PITCH, 36T, 16° angle, 3/32" axle, Ø15.1 mm - #SK3664A

  S&K GEAR 64 PITCH, 36T, 16° angle, 3/32" axle, Ø15.1 mm - #SK3664A

  3.70 ₤

• 

  ATTAN Gear 72 pitch 38 teeth, 0° angle, 2 mm axle, Ø14 mm - #ATT72382

  ATTAN Gear 72 pitch 38 teeth, 0° angle, 2 mm axle, Ø14 mm - #ATT72382

  4.30 ₤

• 

  BSV Gear 72 pitch, 39T, 0° angle, 3/32" axle, with a short hub, for gluing - #BSV7239332led

  BSV Gear 72 pitch, 39T, 0° angle, 3/32" axle, with a short hub, for gluing  - #BSV7239332led

  Suitable for ES 1/32

  3.18 ₤

• 

  BSV Gear 72 pitch, 42T, 6° angle, 3/32" axle, Ø15.0 mm - #BSV72426

  BSV Gear 72 pitch, 42T, 6° angle, 3/32" axle, Ø15.0 mm - #BSV72426

  2.74 ₤

• 

  YRE Pinion 80 pitch 6 teeth, 0° angle 1.5 mm bore, EDM

  YRE Pinion 80 pitch 6 teeth, 0° angle 1.5 mm bore, EDM

  Manufactured on the Japan EDM machine AMADA. High quality swiss steel.

  4.44 ₤

• 

  ARP PINION 80 PITCH 6T, 0° angle,1.5 mm bore- #ARP8006

  Very good alternative for HORKY pinions. One hundred percent ratio of price/quality

  More smaller wear resistance, but enought soft work of gear

  5.89 ₤

• 

  ARP Pinion gear 48 pitch, 8T, 2 mm bore, steel - #arp4808s

  ARP Pinion gear 48 pitch, 8T, 2 mm bore, steel - #arp4808s

  48 pitch Straight stainless steel 8 tooth pinion gears

  5.91 ₤

• 

  ARP Pinion 64 pitch, 8T, 0° angle, 2 mm bore, stainless steel - #ARP6408

  ARP Pinion 64 pitch, 8T, 0° angle, 2 mm bore, stainless steel - #ARP6408

  64 pitch stainless steel 8 tooth pinion gear heat treated to 36-38 hardness

  5.91 ₤

• 

  BSV Gear 72 pitch, 39T, 0° angle, 3/32" axle, with a full hub, for gluing - #BSV7239332longled

  BSV Gear 72 pitch, 39T, 0° angle, 3/32" axle, with a full hub, for gluing  - #BSV7239332longled

  Suitable for ES 1/24

  3.18 ₤

• 

  CAHOZA Highly durable gear 72 pitch 38 teeth, 0° angle, 2 mm axle, Ø14.15 mm (Ø.557") - #5-B-2

  CAHOZA Highly durable gear 72 pitch 38 teeth, 0° angle, 2 mm axle, Ø14.15 mm (Ø.557") - #5-B-2

  highly durable polymer gears 72 pitch, for 2mm axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant

  4.74 ₤

• 

  HORKY PINION 72 PITCH, 5T, EDM, 0° angle, 1.5 mm bore - #H72P-5-1.5

  HORKY PINION 72 PITCH, 5T, EDM, 0° angle, 1.5 mm bore - #H72P-5-1.5

  21.51 ₤

• 

  CAHOZA Black covered pinion 72 pitch 5 teeth, 0° angle 1.5 mm bore - #17

  CAHOZA Black covered pinion 72 pitch 5 teeth, 0° angle 1.5 mm bore - #17

  EDM pinions 72 pitch 5T - 1,5mm hole, very accurate, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 72 pitch gears

  25.16 ₤

• 

  CAHOZA Black covered pinion 72 pitch 6 teeth, 0° angle 1.5 mm bore - #14

  CAHOZA Black covered pinion 72 pitch 6 teeth, 0° angle 1.5 mm bore - #14

  EDM pinions 72 pitch 6T - 1,5mm hole, very accurate, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 72 pitch gears

  25.16 ₤

• 

  CAHOZA Black covered pinion 72 pitch 6 teeth, 0° angle 1.2 mm bore - #14A

  CAHOZA Black covered pinion 72 pitch 6 teeth, 0° angle 1.2 mm bore - #14A

  EDM pinions 72 pitch 6T - 1,2mm hole, very accurate, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 72 pitch gears

  25.16 ₤

• 

  KOFORD Pinion 64 pitch, 8T, 0° angle, 2 mm bore, Black Diamond coated - #M542

  KOFORD Pinion 64 pitch, 8T, 0° angle, 2 mm bore, Black Diamond coated  - #M542

  8 T Black Diamond coated pinion with boss for greater solder surface area for use with G7. Coating reduces friction and prevents solder from flowing into teeth. Use against plastic spurs only

  6.73 ₤

• 

  ARP PINION 72 PITCH, 6T, 0° angle, 1.5 mm bore (FOR F1/32) - ARP#7206-1,5 mm

  1.5 mm shaft - 72 pitch stainless steel 7 tooth pinion gears heat treated to 36-38 hardness

  The alternative to the HORKY pinions. One hundred percent ratio of price / quality. Very soft work of reducer.

  
  

  5.89 ₤

• 

  CAHOZA Highly durable gear Corrected 72 pitch 38 teeth, 0° angle, 2 mm axle, Ø14.50 mm (Ø.570") - #5-BC-2

  CAHOZA Highly durable gear Corrected 72 pitch 38 teeth, 0° angle, 2 mm axle, Ø14.50 mm (Ø.570") - #5-BC-2

  highly durable polymer gears 72 pitch, for 2mm axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, tooth shape corrected so this gear has the same diameter as 39T, available in 38 teeth

  4.74 ₤

• 

  BSV Gear 72 pitch, 39T, 0° angle, 2 mm axle, Ø14.32 mm (Ø.564") - #BSV72392

  BSV Gear 72 pitch, 39T, 0° angle, 2 mm axle, Ø14.32 mm (Ø.564") - #BSV72392

  3.18 ₤

You viewed: