Gears

• 

  BSV Gear 72 pitch, 40T, 0° angle, 2 mm axle - #BSV72402

  BSV Gear 72 pitch, 40T, 0° angle, 2 mm axle - #BSV72402

  3.70 $

• 

  BSV Gear 72 pitch, 40T, 0° angle, 2 mm axle, with a full hub, for gluing - #BSV72402longled

  BSV Gear 72 pitch, 40T, 0° angle, 2 mm axle, with a full hub, for gluing  - #BSV72402longled

  Suitable for ES 1/24

  3.70 $

• 

  S&K GEAR 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.65 mm - #SK4072

  S&K GEAR 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.65 mm - #SK4072

  4.16 $

• 

  JK GEAR 64 PITCH, 37T, 0° angle, 3/32" axle, Ø15.35 mm, w/screw, narrow - #G637N

  JK GEAR 64 PITCH, 37T, 0° angle, 3/32" axle, Ø15.35 mm, w/screw, narrow - #G637N

  37t Polymer Gears 64 Pitch - The tooth shape was computer designed for less friction. Will never spin on the hub. 35T - Pink, 36T-yellow, 37T-silver, 38T-blue, 39T-violet, 40T-green

  Old catalog #JK4237F

  4.99 $

• 

  CAHOZA Gear 64 pitch, 37T, 0° angle, 3/32" axle, Ø15.42 mm - #6

  CAHOZA Gear 64 pitch, 37T, 0° angle, 3/32" axle, Ø15.42 mm - #6

  Made by Cahoza, these are - without question - the finest and most accurate Spur Gears offered in the Slot Car World today.

  5.20 $

• 

  CAHOZA Highly Durable Gear 64 pitch, 37T, 0° angle, 3/32" axle, Ø15.42 mm - #8

  CAHOZA Highly Durable Gear 64 pitch, 37T, 0° angle, 3/32" axle, Ø15.42 mm - #8

  Highly durable polymer gears 64 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on Cahoza roll tester, crash resistant

  6.40 $

• 

  S&K ES32 72 PITCH, 39T, 0° angle, 2 mm axle, Ø14.3 mm, glued on 2 mm KOFORD axle - ZHB#222

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  JK Gear 72 pitch 40 teeth, 0° angle, 2 mm axle, Ø14.65 mm, w/screw - #G740m

  JK Gear 72 pitch 40 teeth, 0° angle, 2 mm axle, Ø14.65 mm, w/screw - #G740m

  Old catalog #JK72402

  4.99 $

• 

  S&K Gear 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.58 mm. For gluing. - #SK4072G

  S&K Gear 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.58 mm. For gluing. - #SK4072G

  4.37 $

• 

  CAHOZA GEAR 72 PITCH 40T, 0° angle, 3/32" axle, Ø14.85 mm - #5

  POLYMER GEARS 72 PITCH STRAIGHT ELITE
  polymer gears 72 pitch, for 3/32" axle, but only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 40, 41 teeth, gears perfect for Eurosport 24

  4.90 $

• 

  ATTAN Gear 72 PITCH, 40T, 0° angle, 3/32" axle - #ATT7240

  ATTAN Gear 72 PITCH, 40T, 0° angle, 3/32" axle, - #ATT7240

  
  

  5.26 $

• 

  Сahoza highly durable gear 72 pitch 40 teeth, 0° angle, 3/32" axle, Ø14.85 mm - #5B

  6.40 $

• 

  CAHOZA Drilled gear 72 pitch 40 teeth, 0° angle, 3/32" axle (with reduced weight), Ø14.85 mm - #9

  CAHOZA Drilled gear 72 pitch 40 teeth, 0° angle, 3/32" axle (with reduced weight), Ø14.85 mm - #9

  6.60 $

• 

  S&K 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.65 мм, glued on 3/32" Proslot axle - ZHB#224

  The hub is not cut width, but machined to a diameter 3 mm.

  This gear for ES32 if you use offset rims in gears side or for ES24.

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  S&K GEAR 72 PITCH, 40T, 0° angle, 2 mm axle, Ø14.65 mm - #SK40722

  S&K GEAR 72 PITCH, 40T, 0° angle, 2 mm axle, Ø14.65 mm - #SK40722

  4.16 $

• 

  CAHOZA ES24 glyed gear 72 PITCH 40 teeth (Ø14.85 mm) on 3/32" Proslot axle - ZHB#231

  The hub is not cut width, but machined to a diameter 3 mm.

  This gear for ES32 if you use offset rims in gears side or for ES24.

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  ATTAN Gear 72 pitch 40 teeth, 0° angle, 2 mm axle - #ATT72402

  ATTAN Gear 72 pitch 40 teeth, 0° angle, 2 mm axle - #ATT72402

  5.26 $

• 

  CAHOZA ES32 or ES24 glyed gear 72 PITCH 39 teeth (Ø14.52 mm) on 2 mm KOFORD axle - ZHB#228

  The hub is not cut width, but machined to a diameter 3 mm.

  This gear for ES32 if you use offset rims in gears side or for ES24.

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  CAHOZA GEAR 72 PITCH 40T, 0° angle, 2 mm. axle, Ø14.8 mm - #5-B-2

  POLYMER GEARS 72 PITCH STRAIGHT ELITE

  polymer gears 72 pitch, for 2 mm axle, but only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 40, 41 teeth, gears perfect for Eurosport 24

  6.40 $

• 

  JK 72 PITCH, 40T, 0° angle, 2 mm axle, Ø14.65 mm, glued on 2 mm axle KOFORD - ZHB#232

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  BSV Gear 72 pitch, 41T, 0° angle, 3/32" axle - #BSV7241332

  BSV Gear 72 pitch, 41T, 0° angle, 3/32" axle - #BSV7241332

  3.70 $

• 

  BSV Gear 72 pitch, 41T, 0° angle, 3/32" axle, with a full hub, for gluing - #BSV7241332longled

  BSV Gear 72 pitch, 41T, 0° angle, 3/32" axle, with a full hub, for gluing  - #BSV7241332longled

  Suitable for ES 1/24

  3.70 $

• 

  S&K 72 PITCH, 40T, 0° angle, 2 mm axle, Ø14.65 mm, glued on 2 mm axle KOFORD - ZHB#220

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  CAHOZA glyed 72 PITCH 40T (Ø14.8 mm) gear on 2 mm KOFORD axle - ZHB#221

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $