Falcon, Hawk & Johnson Motors
-
H&R Jack Rabbit motor 14,000 rpm - #MJR1
H&R Jack Rabbit motor 14,000 rpm - #MJR1
Mabuchi Replacement Type - Double ended Plain 2mm shaft
-
MID AMERICA Eagle retro motor - #MID606
MID AMERICA Eagle retro motor - #MID606
-
H&R Hawk motor I 18,000 rpm @12V- double shaft - #MH1
H&R Hawk motor I 18,000 rpm @12V- double shaft - #MH1
-
JK Hawk 6 Motor, *** Balanced *** - #M6
JK Hawk 6 Motor, *** Balanced *** - #M6
Old catalog #JK30306
-
JK Hawk 7 Motor *** COMPUTER BALANCED *** 48,000 RPM - #M7
JK Hawk 7 Motor *** COMPUTER BALANCED *** 48,000 RPM - #M7
Old catalog #JK30307
-
JK Hawk 7 Motor *** COMPUTER BALANCED *** with Dual Ball Bearings - #M7BB
JK Hawk 7 Motor *** COMPUTER BALANCED *** with Dual Ball Bearings - #M7BB
Old catalog #JK30307BB
-
JK Hawk motor, *** Balanced *** w/new optional endbell - #M3
JK Hawk motor, *** Balanced *** w/new optional endbell - #M3
HAWK MOTOR-58000 RPM +,-. The endbell is new for the bigger American made armatures. The armature that comes in the motor is the same specifications as the 3030, but the wires leading to the comm have been tired up for better performance and reliability. This motor replaces the 3030 Hawk motor.
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
Old catalog #JK3031
-
KOFORD HAWK MOTOR W/KOFORD 12 ARM - KOF647
JK Hawk motor with Koford 12 arm, Super Big Foot 2 brushes and silver conductive springs.
-
KOFORD Hawk 12 motor w/bonded neo magnets - #M712
KOFORD Hawk 12 motor w/bonded neo magnets - #M712
JK Hawk motor with with bonded Neo magnets and Koford 12 arm, Super Big Foot 2 brushes and silver conductive springs
-
JK Hawk 11 extreme performance drag motor - #M11
Hawk 11 Precision Balanced Extreme Performance Motor, FK Sized, recommended for drag use only.
-
JK Hawk 12 extreme performance motor dual SKF ballbearing *** COMPUTER BALANCED *** - #M12BB
JK Hawk 12 extreme performance motor dual SKF ballbearing *** COMPUTER BALANCED *** - #M12BB
-
JK Hawk 25 Motor (25,000RPM) *** BALANCED *** (analogue of FALCON 4) - #M25
JKP Hawk 25 Motor (25,000RPM) *** BALANCED *** (analogue of FALCON 4) - #M25
A close analogue of the motor FALCON 4, which had been removed from manufacturing.
In St. Petersburg it is allowed to use in "Standard" in the "TEAPOT" model class.
Old catalog #JK303025
-
JK Direct drive motor for C10 1/32 direct drive chassis - NEW VERSION - #M21
JK Direct drive motor for C10 1/32 direct drive chassis - NEW VERSION - #M21
* NEW VERSION * Direct Drive Motor for C10 1/32 Direct Drive Chassis, *** COMPUTER BALANCED ***
Old catalog #JKH-DD
-
JK Hawk Retro Motor *** COMPUTER BALANCED *** - #M8
JK Hawk Retro Motor *** COMPUTER BALANCED *** - #M8
JK Hawk Retro Motor, copper brush tab for better conductivity, Same wind and performance as Falcon 7
Old catalog #JKHR
-
JK Hawk 4 Motor, *** COMPUTER BALANCED *** - #M4
JK Hawk 4 Motor, *** COMPUTER BALANCED *** - #M4
Introducing our newest motor, the Hawk™ MB (yes, a Hawk mini-brute).
We received requests from raceways and racers to make a replacement motor so we did. We tried to match the performance as close to the mini-brute as possible and our pre-release testing showed it to be extremely close
Old catalog #JKHMB
-
RALPH THORNE Raptor PRO FK ball bearing motor 55K - #RTRRAPTOR
RALPH THORNE Raptor PRO FK ball bearing motor 55K - #RTRRAPTOR
RAPTOR PRO FK MOTOR - DOUBLE BALL BEARING. recommended gearing 13/33 road course / 16/54 drag racing . Approx 55k rpm
-
B52 50,000rpm Mini Motor - #B52-50
B52 50,000rpm Mini Motor
Ball bearing at both ends, 50,000 rpm, super dynamic balance, best in the business bar none, close performance between motors
-
B52 50K ball bearing motor - #B5250KBB
B52 50K ball bearing motor - #B5250KBB
50,000 RPM ball bearing motor
-
B52 70K ball bearing motor - #B52-70KBB
B52 70K ball bearing motor - #B52-70KBB
-
MID AMERICA Eagle motor - #MID605
MID AMERICA Eagle motor
-
MID AMERICA Mockingbird motor - #MID604
MID AMERICA Mockingbird motor
-
MID AMERICA Phoenix motor - #MID602
MID AMERICA Phoenix motor
A Hawk size motor with group 12 speed.
-
MID AMERICA Enforcer 60,000 rpm motor - #MID609
MID AMERICA Enforcer 60,000 rpm motor - #MID609
-
MID AMERICA Phoenix Supra 75,000 rpm motor - #MID610
MID AMERICA Phoenix Supra 75,000 rpm motor - #MID610
-
MID AMERICA Phoenix motor double ball bearing - #MID602BB
MID AMERICA Phoenix motor double ball bearing
Phoenix Motor w/ Ball Bearings Details: Do not break in on a power supply
-
CAHOZA Motor 12V - 40,000 rpm - #282
CAHOZA Motor 12V - 40,000 rpm - #282
new short can motor 12V-40,000 rpm, 320 g/cm. Armature is axially aligned to the magnetic field for the best performance and axial play between oilites is from .004" to .008". Shaft dia is 2mm.
-
TWP 70KBB Motor - #TWP70KBB
TWP 70KBB Motor - #TWP70KBB
-
DUBICK Panda 55,000 rpm 12V motor - #DB750
DUBICK Panda 55,000 rpm 12V motor - #DB750
Fast and reliable FK group motor.
55 turns 28 AWG wire
Carbon brushes. Short armature shaft.
-
PROSLOT Euro MK1 Motor - 26.000+ rpm - #PS-4000
PROSLOT Euro MK1 Motor - 26.000+ rpm
155/gm-cm, 280mA, standard with 45 degree springs. Designed for 1/32 and 1/24 ScaleHome, Club and Commercial Racing. CW or CCW rotation
-
PROSLOT Euro MK1 Motor - 37.000+ rpm - #PS-4001
PROSLOT Euro MK1 Motor - 37.000+ rpm
160/gm-cm, 300mA, standard with 60 degree springs. Designed for 1/32 and 1/24 Scale - Home, Club and Commercial Racing. CW or CCW rotation
-
PROSLOT Euro MK1 Motor - 47.000+ rpm - #PS-4002
PROSLOT Euro MK1 Motor - 47.000+ rpm
160/gm-cm, 950mA, standard with 90 degree springs. Designed for 1/32 and 1/24 Scale - Home, Club and Commercial Racing
-
PROSLOT Euro MK1 Motor blue printed sealed with american made armature - #PS-4002B
PROSLOT Euro MK1 motor blue printed sealed
Euro MK 1 Motor - with American made PD (Puppy Dog) armature as used in retro can am racing
-
PROSLOT Euro MK 1 Motor with American made X12 armature 40* - #PS-4002-12
Euro MK 1 Motor with American made X12 armature 40* CW Rotation
-
PROSLOT BRUSH HOOD/ HEAT SINK SET FOR PROSLOT MOTOR (X-12 GROUP), W/OUT SPRING CUPS & SCREWS- #PS641
Brush Hood & Heat Sink set
-
PROSLOT Velociraptor VR 12 “NEO” motor - #PS-4019
PROSLOT Velociraptor VR 12 “NEO” motor
This motor uses the new PS-4017 “Neo” Euro MK1 setup with a specially made .500 diameter VR12 machine wound armature on our race proven Intruder blank and includes G7 brushes. This motor was built for the new wave of “NEO” F/C racing. Our testing using an 85 gram hardbody test car netted .720 ET’s @ 70+ MPH. Recommended starting gear ratio 14/52.
-
PROSLOT Velociraptor VR eXtreme “NEO motor - #PS-4021
PROSLOT Velociraptor VR eXtreme “NEO motor
This motor uses the new PS-4017 “NEO” Euro MK1 setup with a specially made .500 diameter VR eXtreme machine wound armature on our race proven Intruder blank and includes G7 brushes. This motor was built for the “Ultimate” bracket racer and “Outlaw NEO” class racer. Our testing using an 85 gram hardbody test car netted .590 ET’s @ 90+ MPH. This motor has no equal in performance for the money. Recommended starting gear ratio 14/54
-
PROSLOT Velociraptor VR Open “NEO” motor - #PS-4025
PROSLOT Velociraptor VR Open “NEO” motor
This motor uses the new PS-4017 “NEO” Euro MK1 setup with a specially made .500 diameter custom hand wound all-out Topgun style armature featuring our EDM commutator, wound on our race proven Intruder blank and our copper hardware on the endbell. Standard wind 18/24.5 and double ball bearings. Also available in 25/25, 15/24, 14/24
-
JK Set-up For JK#M3 HAWK w/Ceramic Magnets - #M3S
JK Set-up For JK#M3 HAWK w/Ceramic Magnets - #M3S
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
Old catalog #JK30301
-
-
JK REPLACEMENT ENDBELL FOR HAWK #M3 (#M6), ALUMINIUM - #M3EA (#M6EA)
JK REPLACEMENT ENDBELL FOR HAWK #M3 (#M6), ALUMINIUM - #M3EA (#M6EA)
New improved - Upgraded Aluminum endbell for JK Hawk #M3 motors
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
Old catalog #JK30303AL
-
JK NEODYMIUM MAGNETS FOR HAWK MOTOR - #M3M (#M6M)
JK NEODYMIUM MAGNETS FOR HAWK MOTOR - #M3M (#M6M)
NEODYMIUM REPLACEMENT MAGNETS FOR HAWK 3030 MOTOR (more powerful than stock)
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
-
JK Armature for HAWK #M3 motor - #M3A
JK Armature for HAWK #M3 motor - #M3A
Basic HAWK motor armature. It can be used in Proslot EURO MK motors
Old catalog #JK30302
-
PROSLOT HAWK REPLACEMENT ARMATURE W/MARKED "HK" - #4016
HAWK REPLACEMENT ARMATURE W/MARKED RUS
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
-
KOFORD REPLACEMENT ARMATURE FOR JK HAWK - #M644
Koford replacement arm for JK Hawk. Plated better then drill blank shaft, 800° epoxy. Requires JK replacement endbell for Koford arms.
-
PROSLOT HAWK REPLACEMENT ARMATURE W/MARKED "RUS" - #4016
HAWK REPLACEMENT ARMATURE W/MARKED RUS
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
-
KOFORD G12 Armature for Hawk6 Neo Magnet Setup Only 40 Degrees - #M645-12-40
G12 arm to fit JK Hawk 6 bonded neo magnet set up. Better then drill blank shaft, 800° epoxy. 40° timing. recommended for neo magnet set ups only.
-
TQ 16D CAN SCREWS, SELF-TAPPING, FOR ALLEN KEY, 1 pc. - #TQ16
These are custom made of heat treated steel with .050” button heads so your gear wrench will work. The 1/8” self tapping, oversized threads will fix factory stripped endbells. If you race 16D’s, these are the only screws to use. Now chrome plated for corrosion resistance and appearance.
-
TQ 16D CAN SCREWS, SELF-TAPPING, FOR ALLEN KEY, 4 pc. - #TQ16
These are custom made of heat treated steel with .050” button heads so your gear wrench will work. The 1/8” self tapping, oversized threads will fix factory stripped endbells. If you race 16D’s, these are the only screws to use. Now chrome plated for corrosion resistance and appearance.