Chassis & parts
-
KOFORD BRASS RETAINERS FOR .063 TUBING 1 pc. - #M536
Machined brass retainers (eyelets) for .063 tubing
Perfect fit for attaching the front wheels to the formula 1/32! (inner dia. 1.6 mm)
-
SONIC Brass solder-on retainers, inner dia. .050" (1.28 mm),1 pc. - #25-1
Brass solder-on retainers, .050 Retainers 1 pc.
-
SONIC Brass solder-on retainers, for .063" wire (1.6 mm),1 pc. - #25-2
Brass solder-on retainers, .063 Retainers 1 pc.
-
PARMA 1/24 CHASSIS COTTER PIN for CHAMPION TURBOFLEX CHASSIS, 1 pc. - #412
PARMA 1/24 CHASSIS COTTER PIN for CHAMPION TURBOFLEX CHASSIS, 1 pc.
-
DUBICK Lead wire retainers, 2 pcs. - #710
DUBICK Lead wire retainers, 2 pcs.
-
ZHB LEAD WIRE RETAINER, 1 pc.
Lead wire retainer. Prevents lead wire from dragging on track, solders to middle rail.
-
KOFORD LEAD WIRE RETAINER, 1 pc. - #M324
Lead wire retainer. Prevents lead wire from dragging on track, solders to middle rail.
-
ZHB Lead sheet thickness 1 mm, 100 х 100 mm
Lead sheet thickness 1 mm, 100 х 100 mm can help you to configure your chassis.
*To fix, you must use glue or double adhesive tape!
-
ZHB Lead sheet thickness 0.5 mm, 100 х 100 mm
Lead sheet thickness 0.5 mm, 100 х 100 mm can help you to configure your chassis.
*To fix, you must use glue or double adhesive tape!
-
DUBICK Lead sheet thickness 0.5 mm, 50 х 50 mm (.019", 1.968" x 1.968") with a 3M selfstick adhesive tape - #209
DUBICK Lead sheet thickness 0.5 mm, 50 х 50 mm (.019", 1.968" x 1.968") with a 3M selfstick adhesive tape - #209
Lead sheet thickness 0.5 mm, 50 х 50 mm with a adhesive tape can help you to configure your chassis.
The presence of stick layer eliminates the need for glue application and simplifies the work! -
DUBICK Lead sheet thickness 1 mm, 50 х 50 mm (.039", 1.968" x 1.968") with a 3M selfstick adhesive tape - #210
DUBICK Lead sheet thickness 1 mm, 50 х 50 mm (.039", 1.968" x 1.968") with a 3M selfstick adhesive tape - #210
Lead sheet thickness 1 mm, 50 х 50 mm with a adhesive tape can help you to configure your chassis.
The presence of stick layer eliminates the need for glue application and simplifies the work! -
DUBICK Precut Brass pin tubes, length 11.8 mm, 4 pcs.- #DB4081
DUBICK Precut Brass pin tubes, length 11.8 mm, 4 pcs.- #DB4081
-
DUBICK Precut Brass pin tubes, length 10.8 mm, 4 pcs.- #406
DUBICK Precut Brass pin tubes, length 10.8 mm, 4 pcs.- #406
Brass pin tubing for chassis 10.8 mm -4/10 of an inch.
-
ALPHA Lead sheet thickness 1 mm, 37х25mm, SELFSTICK- #503
Lead sheet thickness 1 mm, 37 х 25 mm can help you to configure your chassis.
Self stick
-
K&S Brass strip .016" x 1/4" x 12" (0.41 mm x 6.35 mm x 300 mm) - #KS8230
K&S Brass strip .016" x 1/4" x 12" (0.41 mm x 6.35 mm x 300 mm) - #KS8230
-
KOFORD STEEL PIN TUBING, lenght 80 mm, 1 pc. - #M259
Precut spring temper stainless steel pin tubing, fits full width of car.
-
LUCKY BOB Lead sheet thickness .032" (0,8 mm), 38x53 mm with a adhesive tape - #LB1032
LEAD .032" (0,8 mm) THICK, 38x53 mm, WITH DOUBLE STICK TAPE
-
LUCKY BOB Lead sheet thickness .063" (1,6 mm), 2" x 1" (50,8 x 25,4 mm) with a adhesive tape - #LB1063
LUCKY BOB Lead sheet thickness .063" (1,6 mm), 2" x 1" (50,8 x 25,4 mm) with a adhesive tape
-
LUCKY BOB Lead sheet thickness .016" (0,4 mm), with double-stick tape, 1 pc. - #LB1016
LUCKY BOB Lead sheet thickness .016" (0,4 mm), with double-stick tape, 1 pc. - #LB1016
-
KOFORD CUT BRASS PIN TUBE, lenght 12.8 mm, 4 psc. - #M453
Precut brass pin tubes. Use for solid mount EDM chassis for the front mount or use in all chassis for pin tubes.
-
ZHB OPTIONAL TORSION for CHASSIS PRODUCTION 1/24 JK 4" "CHEETAH X25", Ø1.2 mm
ISRA legal torsion for JKP 4" CHEETAH X25 KIT 0.9MM THICK chassis for PRODUCTION 1/24- #JKPX25.
Allows you to quickly disassemble and assemble the chassis and still remains flat. -
MOSSETTI PATRIOT CHASSIS CLIP, 1 pc - #MR1051
Retaining Clip (2) – All Chassis
-
JK MOTOR BRACKET CHEETAH 25 CHASSIS, 1 pc. - #C40B
JK MOTOR BRACKET CHEETAH 25 CHASSIS, 1 pc. - #C40B
Old catalog #JK250115
-
K&S Round brass tube 3/32" x .014" x 12" (2.36 mm x 0.355 mm x 304.8 mm), 1 pack (3 pcs.) - #KS8126
K&S Round brass tube 3/32" x .014" x 12" (2.36 mm x 0.355 mm x 304.8 mm), 1 pack (3 pcs.) - #KS8126
-
JK BRASS PIN TUBING, lenght 10.8 mm, 4 psc. - #U50
JK BRASS PIN TUBING, length 10.8 mm, 4 psc. - #U50
Old catalog #JKP9171
-
KOFORD BRASS RETAINERS FOR .063 TUBING 24 pcs. - #M536
Machined brass retainers (eyelets) for .063 tubing 24 pieces in an easy open box
Perfect fit for attaching the front wheels to the formula 1/32! (inner dia. 1.6 mm)
-
JK Floating body mount set, set of 4. (1 set) - #U63
JK Floating body mount set, set of 4. (1 set) - #U63
-
MID AMERICA Floating pin tibes, improved - #MID288
MID AMERICA Floating pin tibes, improved - #MID288
-
MOSSETTI Chassis damping foam 1/16" thick - 3M adhesive back - fine cell - 2" x 3" - #MR-1056
MOSSETTI Chassis damping foam 1/16" thick - 3M adhesive back - fine cell - 2" x 3" - #MR-1056
Chassis dampening foam - 1/16" thick with 3m adhesive back fine cell 2" x 3"
-
MOSSETTI Chassis damping rubber strips (20 pcs.) with "3M" adhesive backing tape - #MR-1058
MOSSETTI Chassis damping rubber strips (20 pcs.) with "3M" adhesive backing tape - #MR-1058
Flexible rubber - 0,5 mm (.020") thick
-
MOSSETTI Chassis damping rubber material 2" x 3" piece w/ 3M self adhesive back - #MR-1059
MOSSETTI Chassis damping rubber material 2" x 3" piece w/ 3M self adhesive back - #MR-1059
-
MOSSETTI Silicone chassis spacers, 8 pcs. - #MR-1055
MOSSETTI Silicone chassis spacers, 8 pcs. - #MR-1055
Fits all patriot chassis, fits over chassis tube - dampens vibration
-
JK MOTOR BRACKET CHEETAH 25 CHASSIS, 6 pc. - #C40B-6
JK MOTOR BRACKET CHEETAH 25 CHASSIS, 1 pc. - #C40B
Old catalog #JK250115
-
DUBICK Precut Brass pin tubes, length 11.8 mm, storage tube (24 pcs.) - #DB409
DUBICK Precut Brass pin tubes, length 11.8 mm, storage tube (24 pcs.) - #DB409
-
DUBICK Precut Brass pin tubes, length 10.8 mm, storage tube (24 pcs.) - #407
DUBICK Precut Brass pin tubes, length 10.8 mm, storage tube (24 pcs.) - #407
Brass pin tubing for chassis 10.8 mm -4/10 of an inch
-
JK J-bar accessory pack for C26 aeolos chassis (0.8mm, 0.9mm. 1.0mm, 1.1mm, 1.2mm, 1.3mm, 1.2mm, 1.3mm - #C26J
JK J-bar accessory pack for C26 aeolos chassis (0.8mm, 0.9mm. 1.0mm, 1.1mm, 1.2mm, 1.3mm, 1.2mm, 1.3mm - #C26J
Part number is JKC26J and the price is $4.95 for a pack of 6 bars: 0.031" = 0.8mm 0.035" = 0.9mm (stock front) 0.039" = 1.0mm 0.043" = 1.1mm.
Old catalog #C43J
-
MOSSETTI Patriot motor braces, 2 pcs. (fits jk) - #MR-1050
MOSSETTI Patriot motor braces, 2 pcs. (fits jk) - #MR-1050
Spring steel .050" thick - nickel plated
-
RED FOX Floating pin mounts for JK chassis, 4 pcs. - #RFFLOATP
RED FOX Floating pin mounts for JK chassis, 4 pcs.
Body mounting to enable maximum movement between body and chassis. Used on any pressed steel or brass chassis. Precision machined aluminum and plated.
-
LUCKY BOB Lead sheet thickness .016" (0,4 mm), with double-stick tape, 1 pk. (6 pc.) - #LB1016-6
LUCKY BOB Lead sheet thickness .016" (0,4 mm), with double-stick tape, 1 pk. (6 pc.) - #LB1016-6
-
KOFORD CUT BRASS PIN TUBE, lenght 12.8 mm, 24 psc. in box - #M453
Precut brass pin tubes. Use for solid mount EDM chassis for the front mount or use in all chassis for pin tubes.
-
JK BRASS PIN TUBING, lenght 10.8 mm, 24 psc. in pocket - #U50-12
JK BRASS PIN TUBING, lenght 10.8 mm, 24 psc. in pocket - #U50-12
Old catalog #JK9171
-
ARP Aluminum body pin mounts (4 pcs.) - #ARPBPM
Body pin mounts, Precision machined aluminum and plated to allow for soldering. Ultra lightweight. 4 pieces per bag
-
JK 1/32 Cheetah 11 JK#C1 & JK#C5 2-piece pans - #C1P
JK 1/32 Cheetah 11 JK#C1 & JK#C5 2-piece pans - #C1P
Old catalog #HC1132P
-
RALPH THORNE Chassis skins JK#C26 (JK#C43), green - #C43-006
RALPH THORNE Chassis skins JK#C26 (JK#C43), green - #C43-006
Green shaded. Made from a special .005" thick high gloss and low friction material. Protects the track and your chassis at the same time. It will also reduce unwanted braid arching which ruins the braids and slows your car down in the process. Each package come with 2 pre-cut peel and stick chassis skins.
-
JK 1/32 Cheetah 11 JK#C1 & JK#C5 Chassis Center Section - #C1C
JK 1/32 Cheetah 11 JK#C1 & JK#C5 Chassis Center Section - #C1C
1/32 Center Section replacement for X32 Chassis JKP 1/32 CHEETAH 11 CHASSIS for PRODUCTION 1/32 - #JKPHC1132 & JKP 1/32 CHEETAH.11 CHASSSIS KIT W/1PAN for PRODUCTION 1/32- #JKPX32
-
JK 4" Cheetah aeolos aluminum pan - #C26PA
JK 4" Cheetah aeolos aluminum pan - #C26PA
Old catalog #C43PA
-
JK 4" cheetah Aeolos 1 piece pan 0.040" thick - #C26PT
JK 4" cheetah Aeolos 1 piece pan 0.040" thick - #C26PT
-
JK 4" CHEETAH X25 PAN 0.9MM - #C25P
JK 4" CHEETAH X25 PAN 0.9MM - #C25P
0.9mm replacement pans for 4" X25 chassis JKP 4" CHEETAH X25 KIT 0.9MM THICK chassis for PRODUCTION 1/24- #JKPX25
Old catalog #JKX25P
-
JK 4" CHEETAH X25 CENTER SECTION 0.9MM - #C25C
JK 4" CHEETAH X25 CENTER SECTION 0.9MM - #C25C
.9mm thick replacement center section for the JKP 4" CHEETAH X25 KIT 0.9MM THICK chassis for PRODUCTION 1/24- #JKPX25
Old catalog #JKX25C
-
JK 4" cheetah Aeolos center section - #C26C
JK 4" cheetah Aeolos center section - #C26C
-
JK 4" Cheetah Aeolos 1 piece pan - #C26P
JK 4" Cheetah Aeolos 1 piece pan - #C26P
-
JK 1/32 Cheetah 11 Chassis Two-Piece Pan for PRODUCTION 1/32 - #C1
JKPHC1132 - 1/32 Cheetah 11 / 3 piece chassis design for Production 1/32. Sheet of lead in a gift! - #C1
Old catalog #HC1132
-
JK 1/32 F1 cheetah 11 chassis kit - #C62
JK 1/32 F1 cheetah 11 chassis kit
A beautiful alternative for club races
Designed for HAWK motor, but it is possible to install any motor that falls under the arm :)
Old catalog #JK25141
-
JK 1/32 Direct Drive Chassis Kit - #C10
JK 1/32 Direct Drive Chassis Kit - #C10
Old catalog #JK32DD
-
JK 1/32 Cheetah 11 Chassis w 1-Piece Pan, Kit, for PRODUCTION 1/32 - #C5
Special order!
JKPX321 - 1/32 CHEETAH 11 CHASSIS WITH 1 PAN, 2 piece chassis, for Production 1/32 - #C5
Old catalog #JKX321
-
JK 4" CHEETAH X25 KIT 0.9MM THICK chassis for PRODUCTION 1/24, ISRA legal - #C25
JK 4" CHEETAH X25 KIT 0.9MM THICK chassis for PRODUCTION 1/24, ISRA legal - #C25
4" Cheetah X25 Stainless Steel Chassis Kit 0.9mm thick. Features: Radial pressing guide plate, holes for either 1/2" or 5/8" fronts, shorter in length than the X24 chassis and slightly thicker in the rear pillar block than the X24.
Old catalog #JKX25
-
JK 4" Cheetah 21 chassis kit .035" C-Can - #C21
JK 4" Cheetah 21 chassis kit .035" C-Can - #C21 -
4” Cheetah 21 Stainless Steel Chassis Kit .035” thick with screw in Falcon motor brace
Old catalog #JK25021
-
JK 4" Cheetah F1/Indy chassis kit, narrow - #C30
JK 4" Cheetah F1/Indy chassis kit, narrow - #C30
Old catalog #JK251171
-
JK 4" Cheetah F1/Indy chassis kit, wide - #C35
JK 4" Cheetah F1/Indy chassis kit, wide
Old catalog #JK251172
-
PARMA 1/24 TURBO-flex Chassis - Steel - #420
PARMA steel 2 piece chassis is designed with a floating top pan for best handling and performance. A lightweight aluminum top pan is also available for more speed and faster cornering. 4" wheel base.
-
MID AMERICA 1/24 Champion Turbo-Flex steel chassis - #MID215
MID AMERICA 1/24 Champion Turbo-Flex steel chassis - #MID215
-
MID AMERICA 1/24 Gemini flexy chassis stainless steel - #MID216
MID AMERICA 1/24 Gemini flexy chassis stainless steel - #MID216
-
MID AMERICA 1/24 Gemini flexy chassis stainless steel nickel plated - #MID216N
MID AMERICA 1/24 Gemini flexy chassis stainless steel nickel plated - #MID216N
-
JK Cheetah AEOLOS 4" Production 1/24 chassis - #C26
JK Cheetah AEOLOS 4" Production 1/24 chassis - #C26
Old catalog #C43
-
JK Cheetah AEOLOS 4" Production 1/24 chassis, 0.04" thick. - #C26T
JK Cheetah AEOLOS 4" Production 1/24 chassis, 0.04" thick.
0.039" Front 0.047" Rear
Old catalog #C43
-
MOSETTI Patriot "Spec" chassis 1/24 Penn/Jersey-ECFS - #MR1234
MOSETTI Patriot "Spec" chassis 1/24 Penn/Jersey-ECFS - #MR1234
This is a spec chassis created for the ECFS Production and Penn Jersey Xfinity series. It is the MR1112 Striker Center and the MR3122 Pans
-
MACK 1/32 Chassis GENESIS, FALCON-group motor, without ballbearings
MACK 1/32 Chassis GENESIS, FALCON-group motor, without ballbearings
-
REDFOX GT12 chassis kit 2022 - #RFGT12K-2022
REDFOX GT12 chassis kit 2022 - #RFGT12K-2022
-
RED FOX F1/JRL chassis kit w/out ballbearings - #GRF2K20K
RED FOX F1/JRL chassis kit w/out ballbearings - #GRF2K20K
-
MACK F1/32 Chassis, FALCON-group motor, without ballbearings
MACK F1/32 Chassis, FALCON-group motor, without ballbearings
-
MACK 1/32 Chassis SALON-12, X-12-group motor, without ballbearings
MACK 1/32 Chassis SALON-12, X-12-group motor, without ballbearings
-
RED FOX F1/JRL assembled chassis w/out ballbearings - #GRF2K20B
RED FOX F1/JRL assembled chassis w/out ballbearings - #GRF2K20B
-
REDFOX GT12 2022 chassis assembled w/out ballbearings - #RFGT12A-2022
REDFOX GT12 2022 chassis assembled w/out ballbearings - #RFGT12A-2022
-
Шасси ES24 (Open 12) Brian Solders
Очень хорошее английское шасси. Подходит для класса ES24, но также встает мотор х12.
-
Шасси ES24 Brian Solders новое
Популярное в Америке и Англии шасси. Не проехало ни одной гонки, только тестировалось. Собрано Одненко Костей.
-
DUBICK Engineering 2023 F1-32 chassis assembled without ballbearings - #DBF1
All chassis starting from 2016 will be made of German high-carbon structural steel 1 mm thick. This is the same material that is used the world's leading chassis manufacturers.
The chassis comes with a front wheels
-
DUBICK Engineering 2020 Open 12 chassis assembled without ballbearings - #122020
All chassis starting from 2016 will be made of German high-carbon structural steel 1 mm thick. This is the same material that is used the world's leading chassis manufacturers.
-
DUBICK 2023 ES 1/32 Eurosport Chassis Assembled w/out ballbearings - #ES32
All chassis starting from 2016 will be made of German high-carbon structural steel 1 mm thick. This is the same material that is used the world's leading chassis manufacturers.
-
HORKY 2017 F1-32 Chassis Assembled without ballbearings
It is delivered under the order
Perhaps a slight change in price, depending on the terms of delivery.
-
HORKY 2016 ES 1/32 Chassis Assembled without ballbearings
It is delivered under the order
Perhaps a slight change in price, depending on the terms of delivery.
-
HORKY 2016 ES 1/24 Chassis Assembled without ballbearings
It is delivered under the order
Perhaps a slight change in price, depending on the terms of delivery.
-
HORKY 2016 OPEN-12 Chassis Assembled without ballbearings
It is delivered under the order
Perhaps a slight change in price, depending on the terms of delivery.
-
HORKY 2020 ES 1/24 chassis assembled without ballbearings
HORKY 2020 ES 1/24 chassis assembled without ballbearings
-
HORKY 2020 OPEN-12 chassis assembled without ballbearings
HORKY 2020 OPEN-12 chassis assembled without ballbearings
-
CASTRICONE 2021 ES Chassis Assembled without ballbearings
It is delivered under the order