80 Pitch

• 

  ARP Pinion 80 PITCH 6T, 0° angle, 1.2 mm bore, heat treated - #ARP8006H

   These are heat treated 80 pitch 6 tooth pinions with a 1.2 mm bore. Certified to RC55

  10.95 $

• 

  YRE Pinion 80 pitch 6 teeth, 0° angle 1.5 mm bore, EDM

  YRE Pinion 80 pitch 6 teeth, 0° angle 1.5 mm bore, EDM

  Manufactured on the Japan EDM machine AMADA. High quality swiss steel.

  6.00 $

• 

  ARP PINION 80 PITCH 6T, 0° angle,1.5 mm bore- #ARP8006

  Very good alternative for HORKY pinions. One hundred percent ratio of price/quality

  More smaller wear resistance, but enought soft work of gear

  7.96 $

• 

  S&K Gear 80 PITCH, 43T, 0° angle, 2 mm axle, Ø14,3 mm - #SK43802

  S&K Gear 80 PITCH, 43T, 0° angle, 2 mm axle, Ø14,3 mm - #SK43802

  4.16 $

• 

  S&K Gear 80 PITCH, 43T, 0° angle, 2 mm axle, Ø14,3 mm, for gluing - #SK43802G

  S&K Gear 80 PITCH, 43T, 0° angle, 2 mm axle, Ø14,3 mm, for gluing - #SK43802G

  4.37 $

• 

  JK SPUR GEAR 80 PITCH, 43T, 0° angle, 3/32" axle, Ø14,28 mm, w/screw - #G843

  JK SPUR GEAR 80 PITCH, 43T, 0° angle, 3/32" axle, Ø14,28 mm, w/screw - #G843

  Old catalog #JK4343

  4.99 $

• 

  S&K Gear 80 PITCH, 43T, 0° angle, 3/32" axle, Ø14,3 mm - #SK4380

  S&K Gear 80 PITCH, 43T, 0° angle, 3/32" axle, Ø14,3 mm  - #SK4380

  4.16 $

• 

  VITULA GEAR 80 PITCH, 43T, 0° angle, 3/32" axle, Ø14,45 mm, for gluing - #003P

  VITULA GEAR 80 PITCH, 43T, 0° angle, 3/32" axle, Ø14,45 mm, for gluing - #003P

  5.79 $

• 

  S&K Gear 80 PITCH, 43T, 0° angle, 3/32" axle, Ø14,3 mm, for gluing - #SK4380G

  S&K Gear 80 PITCH, 43T, 0° angle, 3/32" axle, Ø14,3 mm, for gluing - #SK4380G

  4.37 $

• RED FOX 80 PITCH 43T, 0° angle, 2 mm axle, Ø14.35 mm glued on 2 mm axle KOFORD - ZHB#203

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  JK POLYMER GEAR 80 PITCH, 44T, 0° angle, 2 mm axle, Ø14,6 mm, w/screw - #G844m

  JK POLYMER GEAR 80 PITCH, 44T, 0° angle, 2 mm axle, Ø14,6 mm, w/screw - #G844m

  Old catalog #JK43442

  4.99 $

• 

  S&K Gear 80 PITCH, 44T, 0° angle, 2 mm axle, Ø14,6 mm- #SK44802

  S&K Gear 80 PITCH, 44T, 0° angle, 2 mm axle, Ø14,6 mm- #SK44802

  4.16 $

• 

  HORKY GEAR 80 PITCH, 44T, 0° angle, 2mm axle, Ø14.5 mm- #44-2mm

  HORKY GEAR 80 PITCH, 44T, 0° angle, 2mm axle, Ø14.5 мм - #44-2mm

  2.11 $

• 

  CAHOZA GEAR 80 PITCH 44T, 0° angle, 2 mm. axle, Ø14.56 mm - #2

  POLYMER GEARS 80 PITCH ELITE 2MM AXLE
  polymer gears 80 pitch, for 2mm axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 44, 45 teeth

  3.00 $

• 

  HORKY GEAR 80 PITCH, 44T, 0° angle, 2mm axle BIG HUB, Ø14.5 mm - #BH44-2mm

  HORKY GEAR 80 PITCH, 44T, 0° angle, 2mm axle BIG HUB, Ø14.5 мм - #BH44-2mm

  5.26 $

• 

  CAHOZA GEAR 80 PITCH 44T, 0° angle, 2 mm. axle, Ø14.56 mm, HARDER- #2-B

  HIGHLY DURABLE GEARS 80 PITCH 2MM AXLE
  new highly durable polymer gears 80 pitch, for 2mm axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, available in 44 teeth

  6.20 $

• S&K Gear 80 PITCH 43T, 0° angle, 2mm axle, Ø14.3 mm glued on 2 mm axle KOFORD - ZHB#201

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  CAHOZA black covered pinion 80 pitch 6 teeth, 0° angle 1.5 mm bore, EDM - #13

  CAHOZA black covered pinion 80 pitch 6 teeth, 0° angle 1.5 mm bore, EDM - #13

  29.00 $

• 

  S&K 80 PITCH 44T, 0° angle, 2mm axle, Ø14.6 mm glued on 2 mm axle KOFORD - ZHB#204

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• JK 80 PITCH 44T, 0° angle, 2mm axle, Ø14.6 mm glued on 2 mm axle KOFORD - ZHB#205

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  HORKY BIG HUB 80 PITCH 44T, 0° angle, 2 mm axle, Ø14.5 mm glued on 2 mm axle KOFORD - ZHB#206

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $

• 

  JK GEAR 80 PITCH, 44T, 0° angle, 3/32" axle, Ø14,6 mm, w/screw - #G844

  JK GEAR 80 PITCH, 44T, 0° angle, 3/32" axle, Ø14,6 mm, w/screw - #G844 

  Old catalog #JK4344
  

  4.99 $

• 

  S&K Gear 80 PITCH, 44T, 0° angle, 3/32" axle, Ø14,6 mm - #SK4480

  S&K Gear 80 PITCH, 44T, 0° angle, 3/32" axle, Ø14,6 mm - #SK4480

  4.16 $

• 

  CAHOZA 80 PITCH 44T, 0° angle, 2 mm axle, Ø14.5 mm glued on 2 mm axle KOFORD - ZHB#207

  The hub is cut to a width 3.5 mm & machined to a diameter 3 mm 

  This one intended for Eurosport 1/32

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  12.00 $