72 Pitch
-
ARP PINION 72 PITCH, 8T, 0° angle, 2 mm bore - #ARP7208
72 pitch stainless steel 8 tooth pinion gears heat treated to 36-38 hardness
The alternative to the HORKY pinions. One hundred percent ratio of price / quality. Very soft work of reducer.
-
ARP PINION 72 PITCH, 7T, 0° angle, 1.5 mm bore (FOR F1/32) - #ARP7207-1,5 mm
Same as 7207 execpt for 1.5mm shaft instead of standard 2mm - 72 pitch stainless steel 7 tooth pinion gears heat treated to 36-38 hardness
The alternative to the HORKY pinions. One hundred percent ratio of price / quality. Very soft work of reducer.
-
ARP PINION 72 PITCH, 9T, 0° angle, 2 mm bore - #ARP7209
72 pitch stainless steel 9 tooth pinion gears heat treated to 36-38 hardness
The alternative to the HORKY pinions. One hundred percent ratio of price / quality. Very soft work of reducer.
-
ARP PINION 72 PITCH, 10T, 0° angle, 2 mm bore - #ARP7210
72 pitch stainless steel 10 tooth pinion gears heat treated to 36-38 hardness
The alternative to the HORKY pinions. One hundred percent ratio of price / quality. Very soft work of reducer.
-
ARP Pinion 72 pitch, 9T, 5° angle, 2 mm bore - #ARP7209A
ARP Pinion 72 pitch, 9T, 5° angle, 2 mm bore - #ARP7209A
72 pitch stainless steel 9 tooth pinion gears with 5 degree angle heat treated to 36-38 hardness
-
ARP Pinion 72 pitch, 12T, 0° angle, 2 mm bore - #ARP7212
ARP Pinion 72 pitch, 12T, 0° angle, 2 mm bore - #ARP7212
72 pitch stainless steel 12 tooth pinion gears heat treated to 36-38 hardness
-
ARP Pinion 72 pitch, 10T, 5° angle, 2 mm bore - #arp7210A
ARP Pinion 72 pitch, 10T, 5° angle, 2 mm bore - #arp7210A
72 pitch stainless steel 10 tooth pinion gears with 5 degree angle heat treated to 36-38 hardness
-
ARP Pinion 72 pitch, 12T, 5° angle, 2 mm bore - #arp7212A
ARP Pinion 72 pitch, 12T, 5° angle, 2 mm bore - #arp7212A
72 pitch stainless steel 12 tooth pinion gears with 5 degree angle heat treated to 36-38 hardness
-
ARP Plastic spur Gear 72 pitch, 43T, 2° angle, 3/32" axle - #ARP7243SP
ARP Plastic spur Gear 72 pitch, 43T, 2° angle, 3/32" axle - #ARP7243SP
Actual photo will be added soon :)
-
KOFORD Pinion 72 pitch, 9T, 3° angle, 2 mm bore, black diamond - #M677
KOFORD Pinion 72 pitch, 9T, 3° angle, 2 mm bore, black diamond - #M677
Pinned 9T 3° angled Black Diamond coated pinions for G7 racing. Coating reduces friction and prevents solder from flowing into teeth. Use with M636 pinion wire.
-
S&K 72 PITCH 39T, 0° angle, 3/32" axle, Ø14.3 мм, glued on 3/32" Proslot axle - ZHB#223
he hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
S&K Gear 72 pitch 42 teeth, 0° angle, 3/32" axle, Ø15.46 mm glyed on Proslor axle - #225
The hub is not cut width, but machined to a diameter 3 mm.
This gear for ES32 if you use offset rims in gears side or for ES24.
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
CAHOZA ES24 glyed gear 72 PITCH 38 teeth (Ø14.52 mm) on 3/32" Proslot axle - ZHB#230
The hub is not cut width, but machined to a diameter 3 mm.
This gear for ES32 if you use offset rims in gears side or for ES24.
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
S&K 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.65 мм, glued on 3/32" Proslot axle - ZHB#224
The hub is not cut width, but machined to a diameter 3 mm.
This gear for ES32 if you use offset rims in gears side or for ES24.
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
CAHOZA ES24 glyed gear 72 PITCH 39 teeth (Ø14.52 mm) on 3/32" Proslot axle - ZHB#229
The hub is not cut width, but machined to a diameter 3 mm.
This gear for ES32 if you use offset rims in gears side or for ES24.
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
CAHOZA ES24 glyed gear 72 PITCH 40 teeth (Ø14.85 mm) on 3/32" Proslot axle - ZHB#231
The hub is not cut width, but machined to a diameter 3 mm.
This gear for ES32 if you use offset rims in gears side or for ES24.
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
CAHOZA glyed 72 PITCH 40T (Ø14.8 mm) gear on 2 mm KOFORD axle - ZHB#221
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
S&K 72 PITCH, 40T, 0° angle, 2 mm axle, Ø14.65 mm, glued on 2 mm axle KOFORD - ZHB#220
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
CAHOZA ES32 glyed gear 72 PITCH 39 teeth (Ø14.52 mm) on 2 mm KOFORD axle - ZHB#226
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
JK 72 PITCH, 40T, 0° angle, 2 mm axle, Ø14.65 mm, glued on 2 mm axle KOFORD - ZHB#232
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
ARP EDM Pinion 72 pitch 7 teeth, 0° angle 2 mm bore - #ARP7207EDM
The alternative to the HORKY pinions. One hundred percent ratio of price / quality. Very soft work of reducer.
-
HORKY PINION 72 PITCH, 6T, EDM, 0° angle, 1.5 mm bore (FOR F1/32)
HORKY PINION 72 PITCH, 6T, EDM, 0° angle, 1.5 mm bore (FOR F1/32)
-
HORKY PINION 72 PITCH, 7T, 0° angle, EDM, 2 mm bore
HORKY PINION 72 PITCH, 7T, 0° angle, EDM, 2 mm bore